Latest steel sealing wire Tenders | Government steel sealing wire Tenders

State Government

CTN :40125270

05 May, 2025 70.0 Thousand

Meerut - Uttar Pradesh

Tender For supply of polycarbonate seal - 1- seals should be made of high quality of uv stabilized polycarbonate plastic materials (engineering plastic), which shall give complete visualization of its fixing mechanism and shall show clear indication if tampered and it should not be effected by boiling water etc- the seal must be able to withstand harsh environment direct sunlight exposure.the seal will be tamper evident with double locking system with additional third locking system facility, which works when the double anchor system is put in place with the female part of the seal. the seal should be transparent clear. the seal should be of one- piece polycarbonate body consisting of capsule and double locking anchor having stainless steel twisted wire (two stained) of 20 cm long molded itself in the temper proof seal male part. the wire should be non-corrosive and nonmagnetic made of 304 grades. sequential serial nos. of one alpha and six numeric numbers to be provided on the female part. the seal should have high rise molded logo be embossed of purchaser and companys name one each side of the seal. the provision for tamperproof sticker signature in the field of13.5mm x 21.5mm should be given, as and when the purchaser requires the need for the same for its proper utilization. the sealing arrangement should be such that its original position cannot be restored after any effort of tamper or breaking of the seals. the third lock as said should work as deterrent for opening the main male & female part of the seal.packaging: the seal should be supplied in packet of 100 seals. each packet shall be labeled for following information., 1.1- the seal should have following essential features.a. tamper resistanceb. heat resistance c. environmentally safed. should withstand direct sun light & rain water exposuree. tamper evident: material must show clear sign of tampering when material is compromised by penetration, drilling cutting, bending or pulling etc.f. one end of the wire should be loose and other end of wire should be permanently fixed on the upper part of female body passing thru the male part of sealg. ultra violet ray resistant h. must have third lock to secure male & female part from tampering.the sealing mechanism should be such that it can be sealed without using any pliers or tools. the sealing procedure must be fool proof and there should not any scope of pre tampering/malpractice with sealing wire while sealing.above mentioned essential features of seal must be verified by approved laboratory test report including melting point test, boiling water test, temperature with stand test etc.construction: one piece construction comprising of polycarbonate capsule & anchor and integrally connected pin part lock & non corrosive & nonmagnetic 2 strand twisted stainless steel sealing wire, all these features molded into one piece {called seal}capsule: contains and internal locking mechanism which accepts the anchor and permanently secure the sealing wire.anchor: the locking cap shall have double anchors, which secures the loose end of the sealing wire into the capsule locking mechanism.pin lock: lt is molded in the seal at time of manufacturing of the said seal and passes. through female part and locks the male part and secures the seal at the operational level

Central Government And Public Sector

CTN :40159067

09 May, 2025 27.55 Lacs

Patna - Bihar

Tender For supply of supplyuing transformer , itc of transformer , rs joist h beam pole , pcc pole , erection of steel tubular or rail pole , erection of pole , m s angle and channels , supplying m s angle and channels , m s angle , g i pipe , potencial transformer , resistor type lightning arrestor , gang operated air break switch , 11 kv do fuse , 11kv pin insulator , acsr weasel , danger notice plate , g i plate earthing , g i strip in g i pipe , g i strip , g i pipe earthing , g i wire , medium class pvc conduit , 11kv aerial bunched cables , xlpe aerial bunched cables , ht cable end termination , lt cable end termination , energy meter board , suspension for lt abc cable , dead end , gi clamp , kit kat , cantilever angle , loop earthing

corporations/Associations/Others

CTN :40134964

10 May, 2025 NA

Gopeshwer - Uttarakhand

Tender For supply of street lighting item - street light pole , stay set , stay wire , bunch cable , led street light , stay clamp , dead end clamp , suspension clamp , nut and bolt , labour and installation charges

CTN :39926585

29 Apr, 2025 NA

Patiala - Punjab

Tender For corrigendum : supply of 50 319 73 pipe , 4010 000257 rope wire , 5240 008270 suspension pad small , nk000493 nut with bolt 19mm , nk000095 nut with bolt 17mm , nk000491 nut with bolt 13mm , nk002122 tank air adopter , 5310 004996 nut slotted , nk002128 hub cup nut , 5340 003291 clamp , nk003197 brake booster pin big , 5310 005001 nut slotted hexagon , nk003198 booster adopter , nk002692 jubilee clip , nk002747 w40 spray , nk002750 wiring cover , 2530 001696 cover wheel hub , 2530 001688 brake dual disc , 2530 001690 brake dual disc rh , 2530 001687 brake dual disc , 2530 001689 brake dual rh , nk001253 iron brush , nk002689 paint brush , nk001951 grinding wheel

CTN :40102204

28 Apr, 2025 17.00 Lacs

Barabanki - Uttar Pradesh

Tender For : supply of decentralized material under edc barabanki. ----holding clamp for 11 mtr. stpstay clamp for stp 11 mtr.suspension clamptop-t-off clamp for 11 mtr. stptop-t-off clamp for 8.5 mtr. pcc polei hook clampclamp for distribution boxx-arm holding clamp for pcc poledead end clampdropper channel clampearth wire clampgaurding angle clamp for pccgaurding angle clamp for stplt clamp for pcc pole

Central Government/Public Sector

CTN :39320562

28 Apr, 2025 54.52 Lacs

Gaya - Bihar

Tender For corrigendum : supply of tower hardware parts - danger plate , number plate , phase plate set of three , circuit plate set of two , anti climbing device , bird guard set of three , twin bundle spacer , twin rigid spacer for jumper , mid span comp joint , flexible copper bod , earth wire vibration damper , tension clamp for dead end plus jumper cone , twin tension string fitting without clamp , clamp for tension fitting for htls conductor , single i suspension string , clamp for single i suspension fitting for htls conductor

State Government

CTN :40072880

13 May, 2025 NA

Basti - Uttar Pradesh

Tender For supply of material and erection of equipments and structure for construction of 01 no. 132/33kv bay at 132kv sub-station harraiya under electricity transmission division-i, basti - supply, pale fencing, earthing 40 mm ms rod for main earthing, earthing 40 mm ms electrodes ( 3 meter longs), m.s. flat for earthing 75x10, m.s. flat for earthing 50x6, air conditioning system, two ton window ac with all accessories and stabilizer(not less than 5kva capacity) with installation, single tension fitting suitable for, acsr moose, acsr panther, single suspension fittings suitable for, acsr moose, acsr panther, pg clamp suitable for, moose/ moose, moose/panther, panther/panther, bus post clamp suitable for, panther, twin panther, moose, lightening fixture led luminaries type sl-di as per tech specifications, work, erection of main & auxiliary structure consisting of column. beam peak, mast etc and auxiliary structure of installation of cts, la etc. the job consists of shifting of all materials from store to site of erection and erection of structures as per drawing with the help of gi nut & bolts, flat & spring washer with matching the hole, cutting & matching of member if required, including cost of all men and t&p excluding gi structure nut & bolts to complete the work. gi structures, nut & bolts and washer will be provided by department free of cost., erection of 145 kv equipments, 145 kv bus/line and tandom isolator, 145 kv current transformer, 145 kv post insulator, 120 kv lightening arrestor, 145 kv ct junction box, 132 kv transformer (c&r) panel, 145 kv sf-6 circuit breaker, erection of 33 kv equipments, 33 kv vacuum circuit breaker, 33 kv isolator, 33 kv current transformer, 33 kv lightening arrestor, 33 kv ct junction box, stringing of three phase jack bus 132 kv with panther conductor. the work includes cutting & bending of conductor, fixing of single/double bolted type tension fitting/suspension. hoisting of disc insulators and shifting of material from store*site to erection site and all other associated work to complete the job satisfactorily as per instruction of engineer incharge., 132 kv jack bus for transformer, 132 kv making of u jumpers, equipments interconnection jumpering with main bus bar. job includes bending of conductor in proper shape tightening with the help of clamps and all other associated work to complete the job., transformer bay for 132 & 33 kv side, laying and termination of following size control cable in trench/cable trays from different control room c&r panels to switchyard equipments (132/33 kv cb, ct their junction boxes . transformer marshalling etc) in 132/33 kv switchyard as per cable schedule including carriage of cable drum from store and all other associated work., 2cx2.5mm2, 4cx2.5mm2, 6cx2.5mm2, 10cx2.5mm2, termination of control cable ( per termination), cutting strengthening bending and laying 700 mm/500 mm below inside ground and above ground of following size m.s. flat for earthing of main and auxiliary structure and equipments including welding with main earth mat and with objects to be earthed, excavation trenches and back filling painting and all other associated work as required to complete the work satisfactorily. m.s. flat will be providing by the contractor free of cost., 75x10 mm, 50x6 mm, making delta earthing of 120 & 33 kv la by fabrication of 03 nos 3 mtr m.s. round bar ( 36/40 mm dia) electrode it piercing inside the ground and connecting all 03 nos electrodes with 36/40 mm m.s. round laying around as per drawing painting the jointing with 75x10 mm m.s. round bar laying around as per drawing. painting the joints with black japan paint of good quality after proper cleaning of joints by wire brush ms round bar will be provided by dept, free of cost., dismantling of 250k.va 33/0.4k.v station t/f work includes opening of jampers/cable connection/cutting of earthing etc., laying of 300/400mmsq. 3.5core power cable from control room t

Central Government/Public Sector

CTN :39113715

29 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of gs earth wire , suspension clamp , tension clamp , mis span compression joint , flexible cu bond , vibration damber

State Government

CTN :40044265

02 May, 2025 NA

Almora - Uttarakhand

Tender For supply of decentralized items under edsd molekhal under head o&m 2024-25 - ms nut & bolt off size, dead end clamp with i hook ab cable sp-21, stay clamp for sp-23 single end, stay clamp for sp-23 double end, lt clamp with n&b st pole sp-21, stay clamp for sp-21 with nut & bolt, earth wire clamp for sp-23 with n/b, suspension clamp with eye hook, pp & clamp with n & b st pole sp -23, dead end clamp for ab cable, stay insulator 75x90 mm, shackle insulator 100x115 mm with n & b, stay insulator 65x90 mm, bracing clamp top for sp-23 with n/b, bracing clamp bottom for sp-23 with n/b

corporations/Associations/Others

CTN :39816463

25 Apr, 2025 NA

Ahmedabad - Gujarat

Tender For corrigendum : tender for supply of malleable spare and sheet metal components - nut (frt and middle pro shaft)(for transmission- 1515/55 bs-iv) , nut propeller shaft (for transmission- tata 1512/55 , 1618/62 bs-iii and 1618/62 bs-iv) , clutch release yoke(for clutch - tata1515/55 bs-iv) , ball pin (adjuster type) bs3/4/6 (for clutch- tata 1618/62 , 1515/55 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bs-vi) , set screw (for clutch- tata1515/55 bs-iv) , locking wire (for clutch- tata 1618/62 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bd-vi) , spring collar bracket (for front spring- tata 1512/55 bs-iii and 1515/55 bs-iv) , bracket , front spring hanger fr-lh and rr-rh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , bracket , front spring hanger fr- rh and rr-lh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , assy. fuel tank cap complete (for tata ultra 7.5t mini bus bs-iii and bs-iv) , center bearing bracket 192 mm pitch (for transmission- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket , front frd (rubber bush) (for front /rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy rear shackle with rubber bush (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , threaded bush (rubber bush) (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for rubber bush) bs-3/4/6 (rear suspension for tata ultra 7.5t mini bus bsiii and bs iv) , spring pin (for rubber bush) (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. rubber bush (svil-dia 22)(for rear suspension for tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. radiator cap (for tata 1515/55 bs-iv) , ball pin fixed pivot (for clutch booster ley. vk2011.4tgr and tf2012.otgr bs-vi/obd-ii bs-vi) , bracket-front spring wev front - front lh (front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring weveller rh(front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear rh (for front spring le vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear lh vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , cb bracket spl55 (for propeller shaft ley. mini ls1508.7t6r bs-vi) , cap. fuel tank (hcv) (for diesel tank cap- eicher 3008 mini bus bs-iii and bs-iv) , pin (for rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , pin sup.(for front suspension- eicher 3008 mini bus bs-iii and bs-iv) , bush , suspension mcv (for fr and rr suspension- eicher 3008 mini bus bs-iii and bs-iv) , shackle assy , spring (for front/rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , spherical bush dia-10 (for gear shift lever- eicher 3008 mini bus bs-iii and bs-iv) , center bearing bracket (for transmission- eicher 3008 mini bus bs-iv bus bs-iii and bs-iv)

Steel Sealing Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors