Latest steel short Tenders | Government steel short Tenders

CTN :39112800

11 Feb, 2025 NA

North 24 Paragana - West Bengal

Tender For supply of blaso cut 4000 strong or equivalent mineral based soluble cutting oil for" fms" m/cs. spcn. : base oil , oil ox-52 specn: ind/sl/3628(a) in non returnable sound steel drum.

CTN :39112338

07 Feb, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of steel blanks for adapter of rgb-60 as per drg no o rgb 060 1 181 0 rev 0 , steel blanks for body base of rgb 60 as per drg no o rgb 060 1 180 0 rev 0 , steel blank for nozzle plate for rgb 60 as per drawing no. 0 rgb 060 1 182, as per latest revisio

CTN :39105310

04 Feb, 2025 11.32 Lacs

Multi City - Karnataka

Tender For supply of matrials for constraction of swm , unit in grama panchayat jummanakatti - mgnrea-jmk drilling equipment, mgnrea-jmk special gelatin, mgnrea-jmk detonators, mgnrea-jmk safety fuse wire, mgnrea-jmk drilling mechanic grade i, mgnrea-jmk licenced blaster, mgnrea-jmk add sundries charges at 1 % on material, mgnrea-jmk over head & other miscellaneous charges, mgnrea-jmk broken stone aggregate 40 mm size, mgnrea-jmk broken stone aggregate 20 mm size, mgnrea-jmk broken stone aggregate 12 mm to 10 mm size, mgnrea-jmk coarse sand (zone iii), mgnrea-jmk portland cement, mgnrea-jmk mixer (concrete) - 1 cum capacity, mgnrea-jmk add watering charges at 1 % on material, mgnrea-jmk super plasticizer admixture is marked as per 9-103-1999, mgnrea-jmk mason class ii (with tools), mgnrea-jmk hom of vibrator 0.71 days, mgnrea-jmksilver oak or equivalent planks 38 mm thick, mgnrea-jmk jungle wood runners and planks, mgnrea-jmk casurina poles 75 - 100 mm dia, mgnrea-jmk add handling , loading and unloading at 2% on material, mgnrea-jmk casurina poles 100 - 150 mm, mgnrea-jmk ms flat, mgnrea-jmk bolts and nuts, mgnrea-jmk add sundries charges at 2 % on material, mgnrea-jmk rubble stones, mgnrea-jmk bond stone 20 x 20 x 45 cm, mgnrea-jmkmixer (concrete small used in culvert), mgnrea-jmk size stone 20 x 20 x 25 cms, mgnrea-jmk boulders, mgnrea-jmk mason class i (with tools), mgnrea-jmk stone chistler class ii, mgnrea-jmk add sundries charges at 1 % on labour, mgnrea-jmkadd watering charges at 1 % on labour, mgnrea-jmk brick, mgnrea-jmk add handling , loading and unloading at 1% on material, mgnrea-jmk solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm, mgnrea-jmk add providing and removing scaffolding at 3% on labour, mgnrea-jmk water proofing cement paint, mgnrea-jmk add brush, putty, sand paper at 2% on cost of paint, mgnrea-jmk painter class i, mgnrea-jmkbroken granite metal 20 mm, mgnrea-jmk broken granite metal 10 mm, mgnrea-jmk mgnrea-jmk ms angle iron 50mm x 50mm x 6mm, 33.8 mtr in length at 4.5 kg per mtr, mgnrea-jmk ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr, mgnrea-jmk gusset plates 6 mm thick, mgnrea-jmk base plate / base plate, mgnrea-jmk anchor bolts 750mm, mgnrea-jmk corbon electrodes, mgnrea-jmk welder grade i, mgnrea-jmk hom of welding and grinding machine, mgnrea-jmk add, mgnrea-jmk hom of cutting and grinding machine, mgnrea-jmk ready mix primer paint (ready mix red lead paint), mgnrea-jmk add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, mgnrea-jmk enamel metal paint, mgnrea-jmk add brush at 1% on cost of paint, mgnrea-jmk tools & plants and electrical charges at 2%, mgnrea-jmk unit cost as per the specification, mgnrea-jmk enamel paint, mgnrea-jmk add brush, putty, sand paper, roller at 5% on cost of paint, mgnrea-jmk tmt bars fe 500, mgnrea-jmk binding wire, mgnrea-jmk orissa pattern of size 580x440mm with integral type foot rests, mgnrea-jmk 100mm s or p trap, mgnrea-jmk p.v.c. flushing cistern 10 ltslow level with fitting, mgnrea-jmk c.i. / m.s. brackets for flushing cistern, mgnrea-jmk g.i. 32mm dia telescopic flush pipes with fittings specials, mgnrea-jmk m.s. holder bat clamp 32mm, mgnrea-jmk g.i. overflow pipe 20mm dia, mgnrea-jmk special for overflow pipe, mgnrea-jmk mosquito proof coupling 25mm, mgnrea-jmk add white lead paint,gasket, cement, sand for making good the wall and floor at 2% on material

CTN :38859948

30 Jan, 2025 20.00 Lacs

Narmadapuram - Madhya Pradesh

Tender For corrigendum : tender for the purchase of orthopedic implants for the patients admitted in district hospital narmadapuram - interlocking nail for tibia all sizes with 4 locking bolt set, distal tibia nail all sizes with 4 locking bolt set, interlocking nail for femur all sizes with 4 locking bolt set, distal femer condylar nail all sizes with 5 locking bolt set, proximal femur nail a2 (stainless steel) short pfn a2/ with bolt, proximal femur nail a2 (stainless steel) long pfn a2/ with bolt, proximal femur nail plain with bolts (stainless steel) short pfn a2/ with bolt, proximal femur nail long with bolts (stainless steel) long pfn a2/ with bolt, interlocking humers nail all sizes with 4 locking bolt set, ph humers nail with all size bolt, trauma implants dynamic compression plate d.c.p.small radius/ulna complet set with screw (4 hole to 12 hole), d.c.p.narrow for tibia/humers all sizes with 4.5 cortical screw complete set (5 hole to 16 hole), d.c.p. broad for femur all sizes with 4.5 cortical screw & screw hole set, special plate " t" butteress plate for tibia all sizes with 4.5 cortica screw & 6.5mm cancellous screw hole set, "l" butteress plate right/left"t"butteress plate all sizes with 4.5 cortical screw & 6.5mm cancellous screw hole set, l.c.p. plate small all sizes with locking screw hole set, l.c.p. plate narrow with screw complete set, l.c.p. plate broad with screw complete set, "y"plate all sizes with locking bolt set, reconstrucition plate 3.5mm all sizes with 3.5 cortical screw hole set, reconstrucition plate 4.5mm with screw complete set, semi tubular plate all sizes with screw hole set, dhs system with d.h.s. plate. a.o.type (round hole) angle 125*, 130*, 135*, 140*, 145* all sizes lag screw (50-110mm)compression bolt long barrel plate (4-8 hole, 1250-1450) cortical screw 6 (4.5 mm sizes 16mm - 40mm) small (4-6 hole) / medium (7-12, d.h.s.plate a.o. type short barrel angle 130*, 135* with hip screw all sizes and required 4.5 mm cortical screw as one set & lag screw hole set, d.c.s.plate(angled blade plate)95* complete set all sizes with hip screw and required cortical screw as one set & lag screw, "k"nail for femur dia all sizes set, square nail radius (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter & sizes set, cancellous screw 4.0mm titanium 15mm to 50mm each, cannulated cancellous screw 6.5mm, 16 and 32mm stainless steel 25 mm to 110mm each, cannulated cancellous screw 6.0mm titanium 15mm to 65mm each, cannulated cancellous screw titanium 4.0mm 20mm to 70mm each, cannulated cancellous screw stainless steel 4.0mm 20mm to 70mm each, pin & wire thredad "k" wire double ended dia 1mm, to 3.5mm, all sizes & length each, "k" wire 1mm to 3.5mm each, s.s.wire reel 16 to 18, 20 gz each 5 meter, steinman pins 3mm, to 6mm each, denham pins 3mm, to 6mm each, a.o.type external fixator system 6 schanz screw schanz screw cancellous thread 5mm, 6mm close clamp- 5*10 open clamp- 5*10 close clamp-double pin- 5*10 rod-to-rod clamp- 10*10 connecting rods 10mm all length)all sizes, a.o.type external fixator system 10 schanz screw schanz screw cancellous thread 5mm, 6mm close clamp- 5*10 open clamp- 5*10 close clamp-double pin- 5*10 rod-to-rod clamp 10*10 connecting rods 10 mm all length)all sizes, a.o. type external fixator radius/ulna connecting rods 4mm close clamp-2.5*4mm all length complete set, external fixator ilizarov four ring complete set (all sizes 80mm to 240mm italian femural arches 90*, 120* all sizes multiple fixtion clams schanz pin fixtion bolts oblique supports threaded rods all sizes (75mm to 400mm,) telescopic rod all sizes (75mm to 350mm) post male/female all sizes hinges female/male 1 hole set ilizarov wires baynot type all sizes olive wire all sizes connecting bolt connecting nut 10mm wire fix. bolts cannulated/slotted complete set, external fixator ilizarov three ring complete set (all sizes 80mm to 240mm italian femural arches 9

CTN :39090214

01 Feb, 2025 NA

Ernakulam - Kerala

Tender For s.253/25 a gym equipments for fitness centre in div 25 - purchase of gym equipments, spinbikespin bike - supply, installation, testing and commissioning of spin bike having the following specifications:assembly (lxwxh): 1350 x 540 x 1250 mm. net weight: 54 kgs. max. user weight: 180 kgs. crank: 3-pc heavyduty cranks. flywheel: 19 kgs., 450mm dia. die-casting.otherfeatures:beltdriven,cro-molyaxle.functions:emergencycaliperbrakingwithtensioncontrol system, stainless steel slider for horizontal micro adjustable handlebar, 6 ranges horizontal /heightadjustable front post, 11 ranges height adjustable seat post. scratch proof anti corrosive surface coating ofthickness not less than 80 microns, preferably fusion bonded epoxy coating. premium quality equipment, legcurl&extension supply,installation,testingandcommissioningofcommerciallegcurlandlegextensionhavingthefollowingspecifications:size(lxwxh):1650x1145x1645mm. net weight: 232 kgs. steel tubing (d type): 70 x 130 mm. steel tubing flat oval: 50 x 120 mm. steelthickness: 3.0 mm. frame colour: silver. pulley: 105 mm (dia.).seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mmrange). weight stack: 60 kgs. weight material: alloy steel. high quality rubber boots are used at the ends ofthe base pipes to avoid damage to the gym floor. scratch proof anti corrosive surface coating of thickness notless than 80 microns, preferably fusionbondedepoxycoating.pinloadedmachine.premiumqualityequipment., crossovercommercial cable cross over machine - supply, installation, testing and commissioning of commercial cablecrossovermachinehavingthefollowingspecifications:size(lxwxh):4470x1090x2310mm.netweight:396 kgs. weight plates: 60 x 2 kgs. pulley: 6.0 mm. steel tubing: 50 x 100 mm. steel thickness: 2.5 mm. seat:high density pu. weight material: cast iron. high quality rubber boots are used at the ends of the base pipes toavoid damage to the gym floor.scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bondedepoxy coating. special high density pu handle grips. 4 integrated weight storage horns to hold multiple weightplates - rubber sheet for floor protection - multiposition pull up bars - multiposition pulley columns which canallow single and dual exercise options - standard accessories: 1ft flat revolvement bar, 1ft curl revolving bar, vbar, d bar, tricep rope (1 set each) - steel sheet fully covered front and back shroud. premium qualityequipment, abcoremachinecommercial abdominal - supply, installation, testing and commissioning of commercial abdominal having thefollowingspecifications:size(lxwxh):1210x1155x1645mm.netweight:198kgs.steeltubing(dtype):70x 130 mm. steel tubing flat oval: 50 x 120 mm. steel thickness: 3.0 mm. frame colour: silver. pulley: 105 mm(dia.) seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mmrange). scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusionbonded epoxy coating. pin / plate loaded machine. premium quality equipment., chestpressmachineflwcommercial chest press - supply, installation, testing and commissioning of commercial chest press having thefollowingspecifications:dimension(lxwxh):1040x1360x1530mm.netweight:97.1kg.weightstack:60kg.tubing: main frame tube is primarily at thickness 2.5 mm, functional parts uses 50*100 rectangular tube.shroud: the cage is adopted with single sided abs translucent plastics with excellent durability and impactresistance. upholstery: chest pad, back pad and seat cushion are adopted with polymer material. durable cablecapable of using more than 250 thousand times. includes cup holder. ergonomic handle bars adopted with tpvmaterials and designed with aluminium ring. fastener: all standard components are made from galvanized orstainless steel materials. adopted with high end pulley with bearing of less tolerance. must meet en957 safetyregula

CTN :38763293

14 Feb, 2025 NA

Kokrajhar - Assam

Tender For corrigendum : supply of bourdon gauge , rtd , thermocouple , strain gauge , force sensitive resistance , pneumatic linear actuators , hg thermometer , ph meter buffer solution , motor with shaft encoder , digital infrared thermometer , gas filled dial thermometer , non contact tachometer , flow sensor , vibration sensor , bellows , ultrasonic sensor module , barometric pressure sensor module , blood pressure bp cuff , 1 led , 2 led , 3 led , lf353 ic , soldering flux , general purpose printed circuit board , ecg clamp limb electrode , ic base socket , shielded wire , male and female pin headers , sphygmomanometer , capacitive proximity sensor , piezoelectric sensor , hall effect based current sensor , humidity gauze , oswald viscometer gauze , saybolt viscometer gauze , weighing machine , stand for oswald viscometer , water pressure pump , stainless steel pre trasdcer sensor , water level depth dettion sensor mle , 1 mosfet ic , 2 mosfet ic , 3 mosfet ic , 4 mosfet ic , 5 mosfet ic , triac , 1 triac , scr , 1 scr , diode , 1diode , 2diode , 3diode , 4diode , dc dc chopper ic , 1dc dc chopper ic , 2dc dc chopper ic , 3 dc dc chopper ic , 4 dc dc chopper ic , potentiometer , 1potentiometer , 2potentiometer , variable capacitor trimmer , 1variable capacitor trimmer , 2variable capacitor trimmer , 3variable inductor , 4variable inductor , arduino , 1arduino , berg strip , dip package ic socket , push button switch , glass beaker , veroboard , 1dc motor , 2dc motor , 3dc motor

CTN :38748470

03 Feb, 2025 NA

Niwari - Madhya Pradesh

Tender For corrigendum : supply, installation and commissioning of sports equipment on item rate turnkey basis at amar shahid chandra sekhar azad govt. pg college, niwari - supply, installation and commissioning of sports equipment on turnkey basis, basket ball pole portable, provision of adjustable mounting yes, board thickness-30mm length-1800mm,width-1050m, conformity to national and international standard, football pole material of goal-approved by fifa, dimensions as per fifa fixed portability, upright goal post and crossbar- round shaped, hockey pole material aluminum (horizontal and vertical crossbar thickness, 3mm) portability-yes dimension width 3.66meter, hight2.14 meter, depth 0.9meter, badminton net material approved by bai, dimensions, badminton post material approved by bai, dimensions as per bai,portable with wheels, base weight 15kg and above.round shaped upright, steeple chase barrierbarrier beam dimension -5x5 inches shape squire ,material aluminum, base leg pull pin design height- adjustable, high jump stand , conformity with sports federation like ttfi sai iabf two brackets for putting a crossbar - one comply with arrow indications, the other one mounted 50 cm lower. stand base made of heavy duty steel, height adjustment from 115 to 265 cm., discus low spin high spin size and dimension weight -2 kg, diameter 219 -221mm,rim thickness 12 mm and above approved by afi, pole vault box meet iaaf/nfhs/ncaa requirement box standard design-1.084 in length,600mm width at the front, and shaped to150 mm at the bottom pole length-3.o5m to 5.3

CTN :39032828

12 Feb, 2025 8.28 Lacs

Kottayam - Kerala

Tender For construction of shed with steel tubular structure and roof with gi corrugated sheets for thumboormuzhi compost bins. necessary steel tubular posts would be erected over rcc pedestals with base plate, gazette plate and bolts.

CTN :39048174

05 Feb, 2025 3.00 Lacs

Thiruvananthapuram - Kerala

Tender For kitchen vessels for anganavadies of kadianamkulam grama panchayath - gas stove and pressure cooker, gas stove: isi certified, premium quality stainless steel top,2 burner manually operated. minimum 2 years warrenty with gas lighter and gas tube, pressure cooker (5l): isi certified, premium quality, alumnium or hindalium cooker of branded companies (prestige,hawkins,butterfly etc)induction base(preferably) with minimum 2 years warrenty, pressure cooker (10l): isi certified, premium quality, alumnium or hindalium cooker of branded companies (prestige,hawkins,butterfly etc)induction base(preferably) with minimum 2 years warrenty

CTN :39086622

31 Jan, 2025 8.39 Lacs

Karnal - Haryana

Tender For const of miscellaneous work in ward no 10 assandh (only for landc society ltd) - [13.29.2]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [through rate], [17.14.2]granular sub-base with close graded material - (table:- 400-1) plant mix method construction of granular sub-base by providing material as per grading iii (table 400-i of mortandh 5th revision) mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of mortandh specifications 2. grading ii material [through rate], [17.69.2]interlocking concrete block pavement 2. providing and laying 80 mm thick isi marked interlocking paver blocks conforming to is 15658:2006/irc sp 63: 2004 of all shapes and colours in design mix cement m 40 over the bed of 30 mm thick fine sand complete in all respect. [through rate], [17.70]removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. [through rate], [17.71]relaying of available (removed and stacked) interlocking paver block pavement having thickness 100mm/80 mm/ 60 mm (average = 80mm) as per drawings and technical specification clause 1504 [through rate], [26.4.1]site clearance 1. excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material, lead up to 50m and lift up to 1.5 m, disposed material to be neatly dressed [through rate], [5.23.2]demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) [through rate], [6.1.1]providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 1. 1:1 :3 (1 cement: 1 coarse sand (zone-iii) : 3 graded stone aggregate 20 mm nominal size) [through rate], [9.57.3]providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 3. 150 mm diameter [through rate]

Steel Short Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors