Latest stiffener Tenders | Government stiffener Tenders

Central Government/Public Sector

CTN :45077768

26 May, 2026 NA

Rajkot - Gujarat

Tender For supply of set of lifting pads and stiffener for btpn/btpnm1 wagons as per rdso drg. wd-86081-s-54,alt 15, consisting of 1) lifting pad (300x65x10 mm) item no.22, qty - 02 nos.; 2) liftingpad stiffener, item no.23, qty - 02 nos.; 3) stiffener at 2nd cross bar item no.24, qty - 04 nos. total 08 nos. in a set. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45078260

18 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of door hold pressing with door hold stiffener,door holding pressing rib,door clip and door hold top stiffener for bobrn double link wagons to rdso drg no : wd-96038-s-03, item-6,7,8,9 & 11, alt : 7. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45076181

14 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 35 )items as given below ,[1] disman damage steeltubular/rail/rcc pole 24.000 ea,[2] reprg broken,twisted & damaged lt poles 8.000 ea,[3] erect stay wire,7/10swg gi stranded wire 56.000 set,[4] erect galv. stay set complete,1.8mx16mm 32.000 set,[5] disman broken pole pl/damaged rcc pole 3.000 ea,[6] disman oh line,1ph,neutral&earth wire 24.000 ea,[7] disman oh line,3ph,neutrl,st.light phase 32.000 ea,[8] disman of acsr conductors from lt pole 72000.000 m,[9] disman of earth wire from lt pole 52000.000 m,[10] erect 6 swg gi continuous earth wire 6560.000 m,[11] erect 8 swg gi continuous earth wire 24000.000 m,[12] erect 10 swg gi continuous earth wire 1600.000 m,[13] erect acsr including supply of 9/6swg 1600.000 m,[14] erect galv. diron clamp,40x6mm,gi flat 160.000 set,[15] erect pole clamp with 50x6mm gi flat 32.000 set,[16] erect galv. ms earth clamp,380x40x6mm 32.000 set,[17] erect galv. ms stay clamp,380x40x6mm 32.000 set,[18] erect galvanize shackle strap,190x40x6mm 16.000 set,[19] erect 4x4.5 porcelain shackle insulator 16.000 ea,[20] erect 3x3.5 porcelain shackle insulator 112.000 ea,[21] erect 2x2.5 porcelain shackle insulator 112.000 ea,[22] erect ms structure/bracket,65x65x6mm 64.000 m,[23] fixg hexagonal type safety device w/4swg 800.000 set,[24] erect steel tubular pole,9m len approx 32.000 ea,[25] scrapg steel tubular pole by sand paper 64.000 ea,[26] disman outdoor termn of main feeder cbl 5.000 set,[27] remvg street light fitting frm pole hood 8.000 set,[28] transpt street light frm dept store-site 8.000 set,[29] fixg fluorescent light/mv/sv fitting 3.000 set,[30] fixg 63a aerial fuse to lt oh line 24.000 set,[31] erect 3 dia,gi pipe,return matl-store 3.000 set,[32] erect cradle guard 2xno.8swg gi wire 112.000 m,[33] attend no power/area charge total area 960.000 ea,[34] shiftg transformer frm bulk supply-site 5.000 ea,[35] pruning of tree branches fouling line 9600.000 ea

CTN :44972285

06 May, 2026 NA

Purnia - Bihar

Tender For bid to ras supply of bathroom or toilet mirror (v3) (q4) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , towel rail (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , floor drain traps (v2) (q3) , soap dish - case (q4) , ply wood 8 foot x4 foot x 12 mm thick 32 sqft , partical board 8 foot x 4 foot x 19 mm thick, 32 sqft , looking mirror 600 x 450 mm with frame , aluminium sliding door bolt 300mm long, 16mm dia , screw steel 50 mm , screw steel 25 mm , screw steel 75 mm , fevicol 1 kg , gi nails 25mm , alumn bow handle 125mm rod dia 12 mm , gi nails 50 mm , wooden beading of 20mm x 6mm x 8 foot , wooden beading for fixing glass 10x10x6mm , round plug wooden, 25mm , aluminium door stopper 100mm long with leg , alum bow handle 150 mm rod dia 12 mm , bracket for curtain rod ss , gi screw 20 mm, 25mm, 35mm, 50mm , stainless steel wire mesh 0.36 mm nominal dia of wire and width aperature 1.40 , plywood 8 foot x4 foot x4mm 32 sqft , screw steel 15 mm , putty 1 kg pkt , alumn sheet 0 point 5mm thick,1 mtr wide 24g , super flush strip 100 mm wide 10 mtr long , cp grating 100 or 102mm , reducing tee 25 mm x 20 mm , gi bend 15mm , gi nipple 20 mm x 80 mm , gi nipple 20 mm x 150 mm , gi reducing socket 20 x 25 mm , pvc handle for flushing cistern , tank cover pvc for 1000 ltr capacity , tank cover pvc for 500 ltr capacity , m seal , gi nipple 25 mm x 50 mm , ss robe hook , brass jumper washer for 15 mm bib tap , gi bend 20mm , hdpe grating 127 mm dia round , gi hook for pipeline , gi bend 25 mm , gi check nut 20mm , gi check nut 25mm , cp bottle trap for whb 32 mm dia , ms angle bracket for whb , drill bit for brick hole 4mm,5mm,6mm,8mm ,10mm //bid details 2 / 62

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

Central Government / Public Sector

CTN :45054922

07 May, 2026 NA

Multi City - Telangana

Tender For auction sale of pway scrap - ms scrap @chityal, cond&u/s cl-iii ms scrap consisting of, 1) sej check rails-1.122 mt, 2)52kg imp sej stock rails end piece-0.528 mt, 3)60kg imp sej stock rail end piece-1.071 mt, 4)52kg imp sej tongue rail end piece-0.336 mt, 5)conventional sej end piece-1.53 mt, 6)cms xing check rail-2.06 mt, 7)60kg g/j cut pieces-0.11 mt, 8)52kg g/j cut pieces-7.1 mt, 9)st sleepers-3.096 mt, 10)slide chair plate-9.775 mt, 11)spl bearing plate(big)-1.08 mt, 12)spl bearing plate(small)-1.946 mt, 13)erc bearing plate-0.416 mt, 14) i-section-0.876 mt 15)a stands-0.146 mt, 16)meeting posts-0.1 mt, 17)gate watch¿0.128 mt, 18)60kg rails below 1 m pieces -3.176 mt, 19)52kg rails below 1 pieces-4.373 mt, 20)90r rails below 1m piece-0.269 mt, 21)t/g &t/p boards-0.340 mt, 22)mould shoes-0.718 mt, 23)gate cover-0.040 mt, 24)guage tie plate-0.825 mt, 25)ms plate-0.154 mt, 26)52kg tongue rail-3.563 mt, 27)52kg 1 m long fish plae-1.00 mt, 28)hook bolts-0.405 mt, 29)plate screws-1.287 mt, total weight-47.570 mt available at sse-pw-ctyl office compound premises& ctyl yard, chityal nalgonda(dt), telangana (state) under the custody of sse/pway/ctyl as per udm lot no: 0041212500011, dt: 11/03/26, divn scrap survey sheet no: 156/2025-26, dt: 11/03/26, ipf-nlda. delivery on actual weighment only. cutting is permissible for loading purpose only. bidder should arrange to return excess material, if found during gross weighment, to the nominated premises of the custodian

Central Government/Public Sector

CTN :45054874

11 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned overaged unserviceable released coaching and wagon ms items consisting of 1) ladder with foam coating. 2) demu filters. 3) control arm assembly with silent block. 4) control arm assembly without silent block. 5) buffer plunger with spindle. 6) brake pad holder/caliper. 7) lavatory door frame. 8) em pad /cc pad. 9) adaptor (wide & narrow jaw). 10) demo axle box cover plate. 11) axle box pivot bush/ silent block. 12) brake shoe. 13) slip assembly 14) control arm upper & lower 15) fall plate 16) axle end cover of lhb. 17) silent block of traction joint. 18) stiffener plate of lhb. 19) knuckle pin & drawbar pin. 20) pu cap base. 21) miscellaneous - operating handle, lock assembly, nut bolt, pipes, a/cocks, brake block keys & other minor items etc.

Central Government/Public Sector

CTN :45054896

11 May, 2026 NA

Multi City - Punjab

Tender For auction sale of others - dismantling & disposal of structures block no. g-60/ 7units/sir, g-61/3units/sir, pump house no. 3/sir colony, t-7/8 units/bspn, west cabin/ngwn, t-8/8 units/mrnd, gang qtr./6units/mrnd, t-4/1 unit/krli, t-8/ 8units/krli, e-14/ 8 units/ krli, t-15/ 1 unit/krli, g-5/ 6 units/krli, g-6/6units/mnpr, old station building/mnpr, gate lodge/c-39/2 units/mnpr-rpar, gate lodge- c-43/ 2 units/ mnpr-rpar in the section of sse/w/sir under aden/sir (69 units) (total 51 unit) (approx. released quantity:- released bricks =464832 nos., released brick bats =339.29 cum, released ms scrap=43044.67 kg, , released rail=749.78 kg, released wooden scrap=3176 kg.

Central Government/Public Sector

CTN :45054997

13 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap m s melting 1. released erc t-3701 243900 nos 185.852 mts 2. released ms liner t-3740 205377 nos 42.308 mts 3. scrap rail 60 kg below 1 meter long standard weight 60.34 kg/m and sample weight 58.70kg/m 68 repair and maintenance 4. scrap rail 52 kg below 1 meter long standard weight 51.89 km/m and sample weight 50.2kg/m 45 repair and maintenance 4. scrap rail 90 r below 1 meter long standard weight 44.61 kg/m and sample weight 42.5 kg/m 52 repair and maintenance total lot qty- 236.62 mts approx. and 449467 nos 2. delivery can be given by actual weight .3. buyer should be visit the site before bidding.4.it strictly advice to the bidder to see the lot and loading point personally before bidding. 5. material can be moved by road within a lead of meter from stocking point.

corporations/Associations/Others

CTN :45051082

06 May, 2026 NA

Ludhiana - Punjab

Tender For auction sale of conveyor belt etc.,aph basket scrap etc.,misc.iron scrap etc.,ci pipe scrap ci mix scrap etc.,old & used survey off 145kv (abcd) etc.,empty steel drum empty etc.,ms iron t/f body etc.,ms iron t/f etc.,ms iron gi gi pipe etc.,ms iron ms rail t/f body etc.,ms iron ms rail t/f etc.,ms iron ms rail etc.,ms iron tin patra gi gss wire scrap etc.,ms iron t/f body tin patra gi ms etc.,ms iron ms angle/channel ms nut & bolts tin patra etc.,ht wire & iron scrap etc.,ms iron ms rail earthwire scrap etc.,go switches defective etc.,u/s tyres 11 kv disc insulator etc.,empty steel drum empty steel reel disc insulator scrap etc.

Stiffener Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors