Latest stone aggregates Tenders | Government stone aggregates Tenders

State Government

CTN :40275373

03 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : handling of lime stone and lime sludge in soda recovery plant at tnpl unit - ii, trichy.

CTN :40508498

17 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete structure and construction material of cp - cement in polythene bags 50 kgs each 43 opc , sand coarse , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , rr stone boulders , tmt steel bar 8 mm dia , tmt steel bar 10 mm di , tmt steel bar 12 mm dia , tmt steel bar 16 mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric , 75mm dia pvc pipe for weep hole , scantling 3 x 3 inch seasoned first class hard wood 2 point 30 mtr long , shuttering plywood of size 8 x 4 feet and 12mm thickness , binding wire 20 gauge zero point 9mm annealed , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 4 inch for shuttering , water proofing compound , quick setting compound , ms door pre fabricated , loophole of size 600 mm x 500 mm , bitumen vg 10 , 10mm thick ms plate as in one layer on roof , 20mm thick ms plate as in two layers on roof , shredded rubber 150 mm , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , paint brush , lighting conductor complete set , cut off machine 14 inch , tile cutter make bosch for ply cutting , working goggle 1 as per sample , ppgi sheet zero point 60 mm thick of size 10 x 03 feet , durmut 5 kg with 5 feet wooden handle , concrete vibration machine petrol needle , hand gloves rubber best quality , pan motor tasala 18 dia made of steel , phawrah with handle midium size , shovel with handle , measuring tape 5 mtr rectractable grade a1 16 , measuring tape 10 mtr rectractable grade a1 16 , wiremess for seiving sand 1 mtr width 15 mtr roll , axes picks 3 kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gum boot various size , spirit level 10 inch long , nylon mason thread 100m long , mild steel single hand double wheel barrow to carry upto wheel barrow 200 kg weight , rock drill machine bit 48mm thick , rock drill machine bit 32mm thick , plumbob steel with lasing , water level pipe for mason work transparents , hammer 10 kg with handle , tmt bar bending frame , tmt bar bending handle , wooden gurmala of size 8 x 4 inch , aluminium study of size 3 x 2 inch and 6 feet long , steel gurmala of size 8 x 4 inch , hdpe tirpal of size 30 x 30 feet , steel bucket 15 ltr , iron cutter blade 14 feet , iron cutter blade 4 feet , hexa blade double side , portable hydraulic concrete mixer machine conforming to is 12119 to 1987 to provide an uniform mix for a reliable operation

CTN :40514350

06 Jun, 2025 7.92 Crore

Jhajha - Bihar

Tender For mr-n/25-26/jhajha/02 - basbutiya to basahara road, providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i, scrarifying existing bituminous surface to a depth of 150 mm and disposal disposal of scrarified materials with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.3 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less tha

State Government

CTN :40514702

14 Jun, 2025 100

Jammu - Jammu And Kashmir

Tender For preparation,submission & all other allied jobs for approval of mining plan of lime stone quarry (77.78 ha.) as detailed in scope of work

CTN :40496615

14 Jun, 2025 9.00 Lacs

Katni - Madhya Pradesh

Tender For invitation of rates for the procurement of powder consumable materials - invitation of rates for the procurement of powder consumable materials, cresolic powder grade 1 value of phenol coefficient -10 isi mark, lime stone powder, carbolic poweder, gamaxine poweder, phenolic powder, malathion poweder

CTN :40465789

11 Jun, 2025 NA

Idukki - Kerala

Tender For supplying marterials for mgnregs works at idukki kanjikuzhy grama panchayat - meterials, stone aggregates (single size)20mm nominal size, stone aggregates (single size10mm nominal size, coarse sand zone iii, portland cement, concrete mixer, vibrator, form work (wall form panel 1250x500 mm _, corner angle 45x45x5 mm 1.50m long, 100 mm channel shoulder 2.5m long, double clip (bridge clip), sigle clip, m s tube 40mm dia

CTN :40466894

24 Jun, 2025 20.00 Lacs

Sagar - Madhya Pradesh

Tender For invited rate for cilvil material supply work at financial year 2025-2026 - flag stone (3 inch thickness), flag stone (4 inch thickness), metal red 40 mm, metal crushed 40 mm, metal crushed 20 mm, metal crushed 10 to 12 mm (including cost of spreading), granular sub-base material (including cost of spreading), metal crushed 6 mm (including cost of spreading), brick (open bhatta), brick (fly ash), over size metal (75-100 mm) including cost of spreading, boulder (including cost of spreading), moorum (including cost of spreading), hard copra (including cost of spreading), black cottan soil for plantation (including cost of spreading), stone dust (including cost of spreading), fine sand (narvda), sand (local), masonary stone( 8x8, 6x6 inch), mild steel / tar rod (6,8,10,12,16 mm), cement (isi mark), steel cross chanel frame work, w.c. sheet western (isi mark), w.c. sheet indian(isi mark), washbasin size 630x450 mm with apair of 15mm c.p brass pillar taps (isi mark), urinal 10 litr wit automatic flushing cistern (isi mark), pvc pipe 2 inch (isi mark), pvc pipe 3 inch (isi mark), pvc pipe 4 inch (isi mark), pvc pipe 6 inch (isi mark), gi pipe 2 inch, gi pipe 3 inch, gi pipe 4 inch, lime, distemper (with brand), paints (with brand), emulsion (with brand), paint for metallic item (with brand), paint for wooden item (with brand), primer (with brand), varnish (with brand), turpentine oil (with brand), melamine polish (with brand), granite different thickness, kota stone different thickness, ceramic tiles different thickness, white marble different thickness, glazed tiles different thickness, centering / shuttering, fancing barbed wire, gi chain line febric fencing with size 50x50 mm and 4mm dia wire, fancing pole (ht.-2.5m.), corrugated galvanised sheet with polymer coated, glass panes different thickness, anodied aluminium according to is:1868, powder coated aluminium, polyster powder coated aluminium, laminated particle board, ply board 8mm (waterproof standard brand ), ply board 10mm (waterproof standard brand ), ply board 12mm (waterproof standard brand ), ply board 16 mm (waterproof standard brand ), ply board 20 mm (waterproof standard brand ), mica sheet different thickness, m-30 grade 60mm paver block, stainless steel railing, galvanised fly proof wire gauze to windows with m.s flat, galvanised fly proof wire gauze to windows with m.s flat, angle iron post and strut, structural steel work including cutting ,hoisting ,fixing in diff. position, p.v.c sheet, labour rate (skilled), labour rate (unskilled)

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

State Government

CTN :40489453

04 Jun, 2025 29.52 Lacs

Gandhinagar - Gujarat

Tender For supply of different type of machine crushed black trap aggregate material from approved quarry to government hot mix plant site at chiloda district gandhinagar. supply machine crushed b.t. stone aggregates 25.00 to 35.00 mm size metal of approved quality to government hot mix plant at chiloda.

State Government

CTN :40489455

04 Jun, 2025 49.70 Lacs

Gandhinagar - Gujarat

Tender For supply of different type of machine crushed black trap aggregate material from approved quarry to government hotmix plant site at chiloda. district gandhinagar.supply machine crushed b.t. stone aggregates 19.00 to 26.50 mm size kapchi of approved quality to government hot mix plant site at chiloda district gandhinagar..

Stone Aggregates Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government