Get complete information related to latest Stone Boulder Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Stone Boulder Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Stone Boulder Tenders.
Tender For rrsmp-24-25 muzaffarpur east -1 -01 - t02 - bargaw to shankarpur, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 p
Tender For advance collection of material for provincial sub division no. 3, pwd bandr jhajjar under provincial division, pwd bandr jhajjar for the year 2024-25 in jhajjar distt. (dumped at chhuchakwas store) group-3 - collection and carriage of machine crushed bajri 11.2mm nominal size from any approved crusher zone passing 100% through 13.2mm. sieve and retained on 5.6mm sieve free from dirt, clay leaves, alongated or flaky pieces soft or disintegrated stone salt, alkali, vegetable matter dust and adherent coatings. the grit shall be posses slow porosity and good hydrophilic characteristics that it shall have greater affinity of bitumen and shall retain a film of bitumen even in the presence of water. the absorption shall not ordinary exceed one percent. the bajri shall be supplied and stacked in store in stacks in 5m x 2m x 1m stacks and fully conforming to specifications for road and bridge works issued by the ministry of surface transport (road wing) 5% deduction in volume computed by stacks measurements shall be made to arrive at the volume to be paid for. (n/s.)., supply, carriage and collection of crushed or broken stone aggregate 53mm to 22.4mm gauge (g-ii) from kalyana/kheri butter or nearest approved quarry in accordance with the specifications laid down in specification no. 3.64 of pwd specifications 1990 ist edition and conforming to grading given in the table as given below. the material shall be stacked in store in stacks of the 2mx1.5mx0.35 m sizes or as desired by the engineer-in- charge. the actual volume of this aggregate deduction ten percent (10%) from the volume computed by stack measurements as per clause 404.(n/s).
Tender For advance collection of material for provincial sub division no. 2, pwd bandr beri under provincial division, pwd bandr jhajjar for the year 2024-25 in jhajjar distt. (dumped at dujana store) group-3 - collection and carriage of machine crushed bajri 11.2mm nominal size from any approved crusher zone passing 100% through 13.2mm. sieve and retained on 5.6mm sieve free from dirt, clay leaves, alongated or flaky pieces soft or disintegrated stone salt, alkali, vegetable matter dust and adherent coatings. the grit shall be posses slow porosity and good hydrophilic characteristics that it shall have greater affinity of bitumen and shall retain a film of bitumen even in the presence of water. the absorption shall not ordinary exceed one percent. the bajri shall be supplied and stacked in store in stacks in 5m x 2m x 1m stacks and fully conforming to specifications for road and bridge works issued by the ministry of surface transport (road wing) 5% deduction in volume computed by stacks measurements shall be made to arrive at the volume to be paid for. (n/s.)., supply, carriage and collection of crushed or broken stone aggregate 53mm to 22.4mm gauge (g-ii) from kalyana/kheri butter or nearest approved quarry in accordance with the specifications laid down in specification no. 3.64 of pwd specifications 1990 ist edition and conforming to grading given in the table as given below. the material shall be stacked in store in stacks of the 2mx1.5mx0.35 m sizes or as desired by the engineer-in- charge. the actual volume of this aggregate deduction ten percent (10%) from the volume computed by stack measurements as per clause 404.(n/s).
Tender For advance collection of material for provincial sub division no. 5, pwd bandr jhajjar under provincial division, pwd bandr jhajjar for the year 2024-25 in jhajjar distt. (dumped at badli store) group-3 - collection and carriage of machine crushed bajri 11.2mm nominal size from any approved crusher zone passing 100% through 13.2mm. sieve and retained on 5.6mm sieve free from dirt, clay leaves, alongated or flaky pieces soft or disintegrated stone salt, alkali, vegetable matter dust and adherent coatings. the grit shall be posses slow porosity and good hydrophilic characteristics that it shall have greater affinity of bitumen and shall retain a film of bitumen even in the presence of water. the absorption shall not ordinary exceed one percent. the bajri shall be supplied and stacked in store in stacks in 5m x 2m x 1m stacks and fully conforming to specifications for road and bridge works issued by the ministry of surface transport (road wing) 5% deduction in volume computed by stacks measurements shall be made to arrive at the volume to be paid for. (n/s.)., supply, carriage and collection of crushed or broken stone aggregate 53mm to 22.4mm gauge (g-ii) from kalyana/kheri butter or nearest approved quarry in accordance with the specifications laid down in specification no. 3.64 of pwd specifications 1990 ist edition and conforming to grading given in the table as given below. the material shall be stacked in store in stacks of the 2mx1.5mx0.35 m sizes or as desired by the engineer-in- charge. the actual volume of this aggregate deduction ten percent (10%) from the volume computed by stack measurements as per clause 404.(n/s).
Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka rajula a under taluka panchayat, rajula under mgnrega (annual unit rate) - cement - 53grade(portland), white cement, coarse sand, coarse sand 5.0 k.m., coarse sand 05 k.m. - 10 k.m., coarse sand 10 k.m. - 15 k.m., coarse sand 15 k.m. - 25 k.m., coarse sand 25 k.m. - 50 k.m., coarse sand 50 k.m. - 100 k.m., fine sand, fine sand 5.0 k.m., fine sand 05 k.m. - 10 k.m., fine sand 10 k.m. - 15 k.m., fine sand 15 k.m. - 25 k.m., fine sand 25 k.m. - 50 k.m., fine sand 50 k.m. - 100 k.m., brick stacking aggregate 40mm size, brick stacking aggregate 40mm size 5.0 k.m. lead, brick stacking aggregate 40mm size 05 k.m. - 10 k.m., brick stacking bats 20 mm, brick stacking bats 20 mm 5.0 k.m. lead, brick stacking bats 20 mm 05 k.m. - 10 k.m., common burnt clay bricks conventional size, common burnt clay bricks conventional size 5 km, common burnt clay bricks conventional size 10 km to 15 km, common burnt clay bricks modular size20x10x10 cm, commonburnt clay bricks modular size 20x10x10 cm 5 km, commonburnt clay bricks modular size 20x10x10 cm 10 km to 15 km, fly ash brick, hand broken stone aggregate 25mm size to 90 mm size, hand broken stone aggregate 25mm size to 90 mm size 5.0 k.m., hand broken stone aggregate 25mm size to 90 mm size 05 k.m. - 10 k.m., hand broken stone aggregate 25mm size to 90 mm size 10 k.m. - 15 k.m., hand broken stone aggregate 25mm size to 90 mm size 15 k.m. - 25 k.m., hand broken stone aggregate 25mm size to 90 mm size 25 k.m. - 50 k.m., hand broken stone aggregate 25mm size to 90 mm size 50 k.m. - 100 k.m., hand broken stone aggregate 40mm size to 63 mm size, hand broken stone aggregate 40mm size to 63 mm size 5.0 k.m., hand broken stone aggregate 40mm size to 63 mm size 05 k.m. - 10 k.m., hand broken stone aggregate 40mm size to 63 mm size 10 k.m. - 15 k.m., hand broken stone aggregate 40mm size to 63 mm size 15 k.m. - 25 k.m., hand broken stone aggregate 40mm size to 63 mm size 25 k.m. - 50 k.m., hand broken stone aggregate 40mm size to 63 mm size 50 k.m. - 100 k.m., crushed stone aggregate for hard quality 10 mm size, crushed stone aggregate for hard quality 10 mm size 5.0 k.m., crushed stone aggregate for hard quality 10 mm size 05 k.m. - 10 k.m., crushed stone aggregate for hard quality 10 mm size 10 k.m. - 15 k.m., crushed stone aggregate for hard quality 10 mm size 15 k.m. - 25 k.m., crushed stone aggregate for hard quality 10 mm size 25 k.m. - 50 k.m., crushed stone aggregate for hard quality 10 mm size 50 k.m. - 100 k.m., cement - 53grade(portland), white cement, coarse sand, coarse sand 5.0 k.m., coarse sand 05 k.m. - 10 k.m., coarse sand 10 k.m. - 15 k.m., coarse sand 15 k.m. - 25 k.m., coarse sand 25 k.m. - 50 k.m., coarse sand 50 k.m. - 100 k.m., fine sand, fine sand 5.0 k.m., fine sand 05 k.m. - 10 k.m., fine sand 10 k.m. - 15 k.m., fine sand 15 k.m. - 25 k.m., fine sand 25 k.m. - 50 k.m., fine sand 50 k.m. - 100 k.m., brick stacking aggregate 40mm size, brick stacking aggregate 40mm size 5.0 k.m. lead, brick stacking aggregate 40mm size 05 k.m. - 10 k.m., brick stacking bats 20 mm, brick stacking bats 20 mm 5.0 k.m. lead, brick stacking bats 20 mm 05 k.m. - 10 k.m., common burnt clay bricks conventional size, common burnt clay bricks conventional size 5 km, common burnt clay bricks conventional size 10 km to 15 km, common burnt clay bricks modular size20x10x10 cm, commonburnt clay bricks modular size 20x10x10 cm 5 km, commonburnt clay bricks modular size 20x10x10 cm 10 km to 15 km, fly ash brick, hand broken stone aggregate 25mm size to 90 mm size, hand broken stone aggregate 25mm size to 90 mm size 5.0 k.m., hand broken stone aggregate 25mm size to 90 mm size 05 k.m. - 10 k.m., hand broken stone aggregate 25mm size to 90 mm size 10 k.m. - 15 k.m., hand broken stone aggregate 25mm size to 90 mm size 15 k.m. - 25 k.m., hand broken stone aggregate 25mm size to 90 mm size 25 k.m. - 50 k
Tender For bid to ras supply of 3040retaining wall - cement 43 grade opc packed in hdpe bag each 50kg wt confirm to is 8112 1989 make birla gold or ambuja or ultratech or jk or dalmia , coarse sand free from vegetation , coarse aggregate 40mm graded , stoneboulder 9inch to 12inch , pvc pipes 75mm each 3 mtr long make prince or finolex or supreme
Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee makhu - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee makhu, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with retro reflective h
Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee panje ke uttar - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee panje ke uttar, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with
Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee ferozepur cantt - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee ferozepur cantt, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 wit
Tender For supply of 65 mm size machine crushed stone ballast in ballast depot and loading into railway wagon (open top wagons) in gangrar station on ajmer-chittaurgarh section.