Latest stone chips Tenders | Government stone chips Tenders

Central Government And Public Sector

CTN :39832460

16 Apr, 2025 34.90 Lacs

Agra - Uttar Pradesh

Tender For repairs to excavated remains in outer side of mint areas at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), random rubble masonry with hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including t & p, material, scaffolding etc complete. (rate including g.s.t.), providing coursed rubble pathway with hard stone with :cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour t&p etc. required for proper completion of work. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6)mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), providing and fixing of r.s. joist (175x85x5.80)mm for hanging of m.s. gate including priming at diwan-e-am, fatehpur sikri, agra. (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), pointing on stone masonry with cement mortar (1 cement, 3 c.sand) mixing with coloring pigment, t & p, scaffolding etc complete. (rate including g.s.t.), steel work in built up tubular trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. electric resistance or induction butt welded tubes. (rate including g.s.t.), painting with synthetic enamel paint of approved brand and manufacture of required colour :two or more coats on new work. (rate including g.s.t.), red sand stone 75mm thick top fixing in m.s. iron frame/ pathway fine dressed on all exposed surface in required pattern and all material labour t&p etc. required for porper completion of work. (rate including g.s.t.), disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. (rate including g.s.t.), providing and fixing of red sand stone benches having 4 legs of size (0.25x0.25x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (rate including g.s.t.), hiring charges of electric / diesel mixer grinder for mortar with operator and fuel etc. co

State Government

CTN :39719506

03 Apr, 2025 26.31 Lacs

Yavatmal - Maharashtra

Tender For corrigendum : graded bunding at sakur gat no. 1 to 7 ta.arni district yavatmal - graded bunding - total 06no of blocks/gat comprising of 141.65 hectares, item no.1:- excavation in all kinds of soil & soft murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing theexcavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with leads as below and all lifts as directed., item no.1:- excavation in all kinds of soil & soft murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing theexcavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with leads as below and all lifts as directed., item no.19:- providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from locally available, excavated materials including labour, hand packing / wedging stone chips, finishing etc. ,complete with lead up to 50 m and alllifts. , item no. : provision for work insurance charges at 1% of work cost, item no. : provision for labour weilfair charges at 1% of work cost, item no. : provision for gst charges at 12% of work cost

State Government

CTN :39826170

09 Apr, 2025 NA

Likabali - Arunachal Pradesh

Tender For supply of material under mgnrega 2025-26 cd block likabali, lower siang district (a. p) - cd block likabali, cement opc 43 grade, sand, shuttering ply (12 mm), wire nails (a/size), citizen information board, tarpaulin (best quality), water, first aid kit, stone aggregate (20 mm), stone aggregate (40 mm), fish seed, rice polish, lime (rajastan), drag net (nylon), g.i sausage wire (8 swg) 3.0 m x 15.00 m, boulder, arecanut seedling, organic mannure, d,.a. p., pestoneem, spade, provision for transportation of material from block hq to site

State Government

CTN :39826171

09 Apr, 2025 NA

Likabali - Arunachal Pradesh

Tender For supply of material under mgnrega 2025-26 cd block kangku, lower siang district (a. p) - cd block kangku, cement opc 43 grade, sand, shuttering ply (12 mm), wire nails (a/size), citizen information board, tarpaulin (best quality), pvc water tank, first aid kit, stone aggregate (20 mm), fish seed, rice polish, lime (rajastan), drag net (nylon), g.i sausage wire (8 swg) 3.0 m x 15.00 m, boulder, arecanut seedling, organic mannure, d,.a. p., pestoneem, provision for transportation of material from block hq to site

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

CTN :39835336

16 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of construction materials2607 - cement 43 grade opc packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 40mm graded , coarse aggregate 20mm graded , coarse aggregate 40 to 63mm graded , stone for rr messonry less than 6 inch , water proofing compound , mild steel bars of size 6 to 8mm dia , mild steel bars of size 10mm and above dia , ms binding wire. , bricks sub class b , glass diving strip

CTN :39835510

15 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , coarse aggregate 40 to 63mm graded , stone for rr masonry less than 6 inch , water proofing compound , mild steel bars of size 6 to 8mm dia , mild steel bars of size 10 mm and above dia , ms binding wire , quick setting compound , cement 43 grade opc packed in hdpe bag each 50 kg , coarse aggregate 20mm graded , coarse aggregate 40mm graded , coarse sand free from vegetative matrials , bricks grade b , bricks bat , pvc pipe 110 mm each 3 mtr long , pvc bend110 mm , pvc socket 110 mm , pvc cowl 75 mm dia , pvc pipe 75 mm each 3 mtr long

CTN :39835523

15 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of construction material - cement 43 grade opc packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 40mm graded , coarse aggregate 20mm graded , coarse aggregate 40 to 63mm graded , stone for rr messonry less than 6 inch , water proofing compound , mild steel bars of size 6 to 8mm dia , mild steel bars of size 10mm and above dia , ms binding wire 0.9mm dia. , bricks sub class b , brick bats , pvc pipe 110 mm each 3m long , pvc pipe 75mm dia each 3.00mtr long , pvc cowl 75mm dia , pvc bend 110 mm dia , pvc socet110 mm dia , quick setting compound

CTN :39846523

17 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of cement 43 grade opc packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 40mm graded , coarse aggregate 20mm graded , coarse aggregate 40 to 63mm graded , stone for rr messonry less than 6 inch , water proofing compound , mild steel bars of size 6 to 8mm dia , mild steel bars of size 10mm and above dia , ms binding wire. , bricks sub class b , brick bats , pvc pipe 110 mm each 3m long , pvc pipe 75mm dia each 3.00mtr long , pvc cowl 75mm dia , pvc bend 110 mm dia , pvc socet110 mm dia , gi binding wire , quick setting compound

CTN :39846923

17 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech,acc,jk,dalmiya under job no 2505 as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr.fixit, fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make- berger,asian,nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger,asian,nerolac , thinner make-nerolac,berger,asian , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata, sail,jsw , ismb hot rolled ms 200 x 100, 3m make-tata, sail,jsw , ismb hot rolled ms 200 x 100, 2m make-tata, sail,jsw bid number/ & ( * ) : gem/2025/b/6092588 dated/ + : 27-03-2025 bid document/ 3 3 1 / 16

Stone Chips Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

State Government

State Government