Get complete information related to latest Strainer Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Strainer Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Strainer Scrap Tenders.
Tender For bid to ras corrigendum : supply of laparoscopic disposable 5mm ports with gas port 10 cm length , laparoscopic disposable 12mm ports with gas port 10 cm length , laparoscopic 5mm mono polar curved maryland dissector 33 to 35cm , laproscopic 5mm babcock grasper monopolar ratchet 33-35 cm , laparoscopic bowel holding atraumatic grasper 5mm ratchet 33to35cm , laparoscopic straight grasper duckbill 5mm 33to35cm shaft length , laparoscopic mixture dissector monopolar 5 mm with 33to35cm , 10mm laparoscopic clip applicator with preloaded titanium clips , laparoscopic disposable 5mm hernia mesh tacker 30to35 cm shaft length , harmonic focus 17 cm curved shear fcs 17 , hemolock clip extralarge golden cartridge , hemolock clip large purple cartridge , hemolock clip medium large green cartridge , set of eight reload cartridges bluecolour for 60to65 mm lap linear cutter and gun , multiclip applicator preloaded withlarge clips for open surgery , multiclip applicator preloaded medium titanium clips for open surgery , multiclip applicator preloaded small titanium clips for open surgery , disposable linear cutter 55to60 mm with 6 compatible blue reloads , new titanium linear cutter 55 with 6 rows selectable staple height and reload , universal reload for linear cutter ntlc 55 with closed staple height , colostomy kit comprising base plate colostomy bag with clamp powder paste , single piece colostomy bag with attached flange and clip size 60to70 mm , abdominal tube drain with collecting bag size 24 fr , abdominal tube drain with collecting bag size 28to32 fr , laparoscopic smoke evacuation tubing with smoke filter , single sterile semi permeablepolyurethane film absorbent pad size 5cm x 7cm , laparoscopic specimen retrieval bag size 100ml , laparoscopic specimen retrieval bag size 200ml
Tender For tender for supply of cut section model of single cylinder petrol engine (two stroke) , cut section model of single cylinder petrol engine (four stroke) , crdi actual working model motor operated , demonstration board of fuel supply system of petrol , cut section model of cooling system , four stroke petrol mpfi engine setup , governer model , cut section of turbo charger motor operated , cut section model of inline fuel injection pump , cut section model of rotary type fuel injection pump , cut section model of synchromesh gear box , cut section model of five speed manual transmission , cut section model of constant mesh gear box , cut section model of mechanical brake system , air brake system working model , different types of gears on board with worm gear (with 7 gears) , hydraulic brake system working model , cut section of monoblock pump , cut section of centrifugal pump , cut section of jet pump , cut section of submersible pump with 4 stages , different impeller board 70 cm x 85 cm , pelton turbine model , kaplan turbine model , centrifugal pump model , gear pump model model , hand water pump model , centrifugal pump model , tubewell model model , deepwell turbine model , submersible pump model , reciprocating pump cut model , centrifugal compressor cut model , francis turbine model , rotary pump model , different types of pipe fitting with accessories , chart of submersible pump cut section 4 feet x 3 feet , chart of monoblock pump cut section 4 feet x 3 feet , chart of jet pump cut section 4 feet x 3 feet , chart of centrifugal cut section 4 feet x 3 feet , chart of sand filter cut section 4 feet x 3 feet , chart of drip irrigation layout size 4 feet x 6 feet , chart of sprinkler irrigation layout size 4 feet x 6 feet , disc harrow model , disc plough model , indigenous plough model , mb plough model , self propelled reaper working model , threshing drum spike tooth type model , threshing drum angular bar type model , threshing drumloop type model , mini rotavator , spike tooth harrow model , blade harrow model
Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit
Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digital
Tender For aluminum work, glass panes,false ceiling, stainless steel sinks, ss wall mounted, lab furniture consisting, static pass box with uv light , pp coving /aluminum coving, exhaust fan with hepa-filter, air curtain-pharma, uv cabinet,gas pipe line,ms wire mesh partition, ceiling fan, air conditioners, electric appliances, solar lights, plumbing & drainage, decontamination room and all other works contingents there to for microbiological /bacteriological laboratory at regional water testing laboratory, amritsar. ( under head 4215 )
Tender For supply of overhauling kit for levelling valve consisting of 16 items of m/s kbi make part no ii68831 to rdso spec no.ck-407. (1) sealing ring part no. b74370/2 qty 01 no (2) o ring part no.a27763/26 qty. 01 no (3) o ring part no. a75374 qty. 01 no (4) washer part no. c68476 qty. 1 no (5) grooved pin part no. 476508 qty. 2 no (6) lock washer part no. a34546/2 qty. 1 no (7) locking ring part no. 466031 qty. 02 no (8) toothed ring part no. a62331/6 qty. 1 no (9) wire mesh filter part no. a40108 qty. 1 no (10) sealing ring part no. 458381 qty 1 no (11) wire str ainer part no. a 51762 qty. 3 no (12) sealing ring part no. i.4.631 qty. 1 no (13) valve head pa rt no. c71558 qty. 2 no (14) compression spring part no. c141622 qty.1 no (15) hex head bolt part no. 451728 qty. 2 no (16) roller part no. a75281 qty. 1 no [ warranty period: 30 months af ter the date of delivery ]