Latest street pole Tenders | Government street pole Tenders

Central Government / Public Sector

CTN :43015347

23 Dec, 2025 NA

Begusarai - Bihar

Tender For supply of spare items for firefighting hydrant systems c c - m2107010003 hose reel drum asy wall mouted , m2107010004 horizontal hose reel type , m2107010005 swivel joint , m2107070015 hose reel hose 19 mm 30 mtrs , m2107070019 shut off nozzles stainless steel , m2107070020 jet spray shut off polymer nozzle , m2107010006 hub and sides for hose reel drum , m2107010007 studs for hose reel drum , m2107010008 water way for hose reel drum , m2107010009 swing arm for hose reel drum , m2107010010 fixed base for hose reel drum , m2107070021 ss ball valve 25 mm , m2111010001 landing valve for fire water system , m2111010004 cast iron hand wheel 160mm , m2111010005 spindle , m2111010011 abs plastic cap , m2111010018 rubber washer coupling , m2111010006 gasket sheet , m2111010019 lugs for landing valve , m2111010008 gland nut , m2111010009 gland bush , m2111010020 gland packing for landing valve , m2111010021 metal gasket 3 inch 150 , m2111010022 bount o ring for landing valve , m2111010007 rubber washer hv , m2111010027 ss female couling 63 mm , m2111010024 safety chain for blank cap , m2111010025 bonnet for landing valve , m2111010026 hydrant stands post double , m2105450001 air release valve 1 inch mbsp threaded , m2107090001 fire hose box for fire water system , m2107090002 hose box door glass , m2107090003 hose box glass rubber beading glass

Central Government/Public Sector

CTN :43016253

22 Dec, 2025 47

Davangere - Karnataka

Tender For tender document supply of drugs and consumables for health and wellness centres in davanagere district - intraocular lens-rigid pc iol ( dho-dvg-r-2025), iris claw lens ( dho-dvg-r-2025), glass syringe 2ml/5ml ( dho-dvg-r-2025), needle holder ( dho-dvg-r-2025), needle holder with catchet ( dho-dvg-r-2025), iris hooks ( dho-dvg-r-2025), steel air cannula ( dho-dvg-r-2025), iris repositor ( dho-dvg-r-2025), dcr set ( dho-dvg-r-2025), cataract set ( dho-dvg-r-2025), steel hydro dissection cannula 26g ( dho-dvg-r-2025), iris claw forceps ( dho-dvg-r-2025), wire vectis ( dho-dvg-r-2025), suture ties stright/bent ( dho-dvg-r-2025), dialer (sinskys hook) ( dho-dvg-r-2025), iol holding forceps ( dho-dvg-r-2025), copsulorhixis forceps ( dho-dvg-r-2025), vannas scissor ( dho-dvg-r-2025), heat cautery ( dho-dvg-r-2025), irrigating vectis ( dho-dvg-r-2025), superior recture forceps ( dho-dvg-r-2025), colibri conjunctival forceps ( dho-dvg-r-2025), conjuctival scissor ( dho-dvg-r-2025), self retracting wire speculum with open blades ( dho-dvg-r-2025), vergin silk non absorbable 10-0 nylon surgical suture (each box 12 pieces) ( dho-dvg-r-2025), dark goggles fiber(post operative) ( dho-dvg-r-2025), flurbiprofen sodium 0.03 mg (0.3mg/ml) eye drops 5 ml ( dho-dvg-r-2025), moxifloxacin hydrocloride(0.5%) +dexamethasone(0.3%) eye drops 5ml ( dho-dvg-r-2025), tropicamide 0.8% +phenylephrine hydrochloride 5% eye drops 5 ml ( dho-dvg-r-2025), topical sodium chloride 5% eye drops 5 ml ( dho-dvg-r-2025), paracaine hydrochloride 0.5% eye drops 5ml ( dho-dvg-r-2025), homatropin eye drops 0.5%5ml vial ( dho-dvg-r-2025), moxifloxacin hydrocloride(0.5%) 5ml vials ( dho-dvg-r-2025), eye draps disposable (1x10) ( dho-dvg-r-2025), tab acetazolamide 250 mg (1 strip x10tab x 10,s) ( dho-dvg-r-2025), disposible needles no 26 (100 s ) ( dho-dvg-r-2025), inj.intasol 500 ml sterile ophthalmic solution. ( dho-dvg-r-2025), inj. lignocain 2% 30ml vial ( dho-dvg-r-2025), inj.moxifloxacin intracumaral (150mc gm/0.1cc) pre loaded in syringe ( dho-dvg-r-2025), inj.pre loaded hydroxy methyl cellulolose 2% in 2ml syringe 1x10 ( dho-dvg-r-2025), simcoe cannule size 23 ( dho-dvg-r-2025), simcoe cannule size 22 ( dho-dvg-r-2025), sics crescent blade 3.2mm bu45 degree 10s ( dho-dvg-r-2025), sics sideport lance tip knife ( dho-dvg-r-2025), sics keratome 3.2mm bu45 degree 10s ( dho-dvg-r-2025), hydro dissecion cannule 26 g ( dho-dvg-r-2025), hydro dissection cannule 25 g ( dho-dvg-r-2025)

CTN :43032548

13 Dec, 2025 NA

Bathinda - Punjab

Tender For supply of prefabricated steel security watch tower post of size (3m x 3m) and 9. 40m

CTN :43015297

23 Dec, 2025 5.16 Lacs

Puri - Odisha

Tender For supply of supply and installation of street light and gate light at patpur ffm c c - g i street light pole , 3 core copper single strand armoured ug cable , single core copper multi strand pvc cable , supply and fixing of led street light fittings , supply and fixing of pvc junction box , single pole mcb , supply and fixing of led post top , supplying and fixing of main switch fuse unit , pvc flexible hose pipe , insulation tape , supply and fixing of ceramic kit kat fuse unit , supplying and fixing of dp sheet steel enclosure on surface or recess , earthing , supplying and laying 25mm x 5mm gi strip , labour charges for excavation of trench , g i channel for mcb fixing , ss nut bolt and washers , labour charges for fixing of gate light with gi pipe fixing or grouting and supply connection , g i pipe for fixing gate light , labour charges including materials , shifting and re installation of existing solar street light pole with concrete base , labour charges for painting of gi street light pole , labour charges for removing of old pcc base , re-arrangement of electrical switchgears items

CTN :42995472

22 Dec, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of instrument for lung transplant - micro-halsted forceps del cvd 125mm, micro-halsted forceps del str125mm, overholt forceps # 6 cvd 225mm, de'bakey suction cannula d:3.0mm 275mm, yankauer suction cannula 2.0mm 285mm, scalpel handle no.4 250mm, scalpel handle no.3 250mm, nelson-metzenbaum scissors cvd 250mm, crile vessel hook blunt 90deg 6/200mm, kocher-langenbeck retr 35x15mm215mm, duval lung forceps 230mm, allison lung spatula 54mm 320mm, de bakey atr.fcps 3.5mm str 200mm, de'bakey atr.fcps 2.0mm str240mm, de'bakey atr.fcps 3.5mm str 240mm, mixter forceps long-serr 250mm, kocher-ochsner forceps cvd 1x2 225mm, wullstein retractor 3x3t.sharp 125mm, ombredanne mallet 900gr.40mm 240mm, rib spreader finochietto-haight alumi., leland-jones peripheral clmp 30dg 190mm, leland-jones peripheral clmpstr 195mm, de'bakey-pean atr.frcps cvd 60mm200mm, dbaky tngental clmp 2.48mm-wide 265mm, de'bakey tangental clmp 54/99/270mm, dbaky tngential clmp 4.58mm-wide270mm, de'bakey atr.diss./ligat.forceps 230mm, sharp hook 90dg-tip185mm, adson nerve hook sharp, schmid irrigating cannula malleab.ll., schmid irrigating cannula malleab.ll., langenbeck-mannerfelt retr25x6mm155mm, durogrip castrov.ndl. hldr serr 0.2/215mm, diadust micro ring forceps 1mm str.210mm, micro spring scissors str.sp/sp 180mm, durogrip mic.needle holder rd.hdl.200mm, 1/1 size perf basket 485x253x56mm, 1/1 size perf basket lid 489x257mm, silicone cushioning pad din size, table post, ø 25 mm, 44,5 cm, post coupling for 2 x 25 mm tubes, horizontal bar, ø25 mm, length 40 cm, flexible horizontal bar, 360° rotation, 49 cm, tilt ratchet mechanism, round ring system, medium, inside265 x 500 mm, outside 303 x 538 mm, segmented with 1 segment pair (216 mm), balfour retractor, 67 x 76 mm, deaver retractor, smal), 25 x 89 mm, deaver retractor, small, 25 x 89 mm, kelly retractor, 25 * 63mm, kelly retractor, modi., 51 * 101mm, kelly retractor, modi., 51 * 127mm, kelly retractor, modi., 51 * 152mm, retractor, malleable, 51 mm length 152mm, retractor, malleable, 76 mm length 152mm, kelly retractor, modi., 51 * 51mm, kelly retractor, modi., 51 * 38mm, kelly retractor, stand., 51 * 64mm, kelly retractor, modi., 51 * 76mm, round ring system, large, 316 * 507mm outside 354 * 545mm segmented with 1 segment pair (171mm), round ring system, small, inside216 x 356 mm, outside 254 * 394mm segmented with 1 segment pair (121 mm), asipco sterilizing-container, 1/1, 587 * 279x 198 mm, grey, complete, wire basket, 530 * 250 * 100mm made of stainless steel 18/10, silicone mat, 520 * 230mm blue

corporations/Associations/Others

CTN :42485358

15 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

15 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

Central Government/Public Sector

CTN :42997956

11 Dec, 2025 74.8 Thousand

Purba Medinipur - West Bengal

Tender For supply of purchase of stationary items d d - photo paper , colour paper 100 page , fevi stick glue stick , post it pad , box folder , sealing wax , double side tape , stick file , flap multicolour plastic , ribbon notice board , feviquick , signature folder , leaf transparent a4 size , calculator , clip board , uniball pen , double punch , duster for white board , file tag small , file tag big , correction pen , paper cutter , ball pen blue black red , eraser , gum bottle 700 ml , lamination sheet , l folder , cd ohp marker , paper clip , pencil 2b , scale plastic , scale steel , scissor medium , single punch , stamp pad , stapler pin small , tape dispenser cello tape stand , white board marker , pmt marker

State Government

CTN :42985190

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For tender for electric line materials under o&m head for f.y. 2025-26 - 33 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 33 kv polymer pin insulators 10 kn with gi pin and nut & washer, 33 kv post insulator 10 kn (polymer), 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut & washer, 11 kv hg fuse unit (polymer type), 33 kv hg fuse unit (polymer type), gi wire no. 6/8/10, gi stay set complete for d/s/s (1900x 20mm) with stay wire 7/10 swg and guy insulator, stay set complete (1800x20mm) with stay wire 7/10 swg & guy insulator (galv), 11 kv stay set complete (1800x16 mm) with stay wire 7/10 swg and guy insulator, ace chemrod ( artificial concept of earthing by chemical rod ) :- ace chemrod earthing electrode (consisting mild steel galvanized pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom.

State Government

CTN :42985206

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For electric line materials under o&m head for f.y. 2025-26 - ace chemrod (artificial concept of earthing by chemical rod):- ace chemrod earthing electrode (consisting mid steel galvanised pipe of size 2500 mm in length x 48 mm outer dia x 2 mm thick. ms-rod of size 2575 mm x 16 mm be weided with bottom. the epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanized pipe, earthing complete conventional type having intermittent layer of charcoal and salt/gi earthing pipe 3.1 meter long & 40 mm dia and 50 kg bentonite powder, earthing (chemical) with gi earthing pipe 40mm 3.1 mtrs. long (bentonite as intermittent layers), gi stay set complete for d/s/s (1900x20mm) with stay wire 7/10 swg and guy insulator, 11 kv stay set complete 1800x16mm with stay wire7/10swg and guy insulator, earthing (chemical) with gi earthing pipe 20 mm 2.5 mtrs. long, gi stay set complete for d/s/s (1900x 16mm) with stay wire 7/12 swg and guy insulator, lt stay set complete (1700x16 mm) with stay wire 7/12 swg, gi stay wire no. 7/8 ,7/10 ,7/12 ,7/14, 7/16, gi wire no. 6/8/10, 33 kv h.g fuse unit (polymer type), 11 kv h.g fuse unit (polymer type), 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 45 kn with h/w fitting, 33 kv polymer pin insulator 10 kn with gi pin and nut & washer, 11 kv pin insulator 5 kn with gi pin (polymer type) and nut &washer, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut &washer, 33 kv post insulator 10 kn (polymer), lt pin insulator with pin (porcelain type), lt shackle insulator (porcelain type)

Street Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government