Get complete information related to latest Structural Drawing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Structural Drawing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Structural Drawing Tenders.
Tender For work construction of bridge on aglad river in km 1 of satagard bend to gherachak dangasari ghuttu motor road in block jaunpur constituency dhanaulti district, t.g. under state sector (first phase work, design drawing, vetting, dpr preparation etc
Tender For caryingout structural design & preparation of drawing of foundation & sub structure of major/ minor bridges, non standard rcc box bridges, checking adequacy of modification in super structure, preparation of gad/tad of lhs/rubs,station building gad, design and structuraldrawings, fob gad and design & drawing of foundations, design of thrust bed, ciculating area plans, drainage layout plan etc. in connection with jaipur-sawai madhopur doubling project.
Tender For consultancy service for preparation of structural and architectural design drawing and soil testing for construction of toe wall rcc storm water drain and earthern drain for newly constructed 304 nos type ii residential quarters at gc crpf bangalore
Tender For tender for supply of architectural services prearation of complete conceptual plans architectural drawings elevation section and schedule of finishes the drawings will cover detailed working drawing to minutest details with reference in soft and hard copy four sets as per specified in specification of documents , structural services structural design and drawing for all buildings duly incorporated with all the approved structuraldrawings with supported by relevant design data(staad file) in all size in hard and soft copy four sets as per specified in specification of documents , detailed estimate preparation of boq and yardstick for all buildings as per the approved architectural structuraldrawing and earth work quantity as per ssr pattern and tender preparation. , drilling of 03 nos of bore holes as shown on drawing of 100 mm dia by rotatory drilling for soil investigation in any type of soil including boulders , weathered rock and 76 mm dia hole in hard rock as per specified in specification of documents , test report should include all the test required for designing the foundation such as spt values , bore logs soil clarification and also should cover the general recommendations for the proposed type of foundation system safe bearing capacity likely total settlement etc the report shall be submitted in quadriplicate duly bounded in a presentable manneras per specified in specification of documents
Tender For conducting final location survey, traffic survey, submission of comprehensive dpr for all civil, electrical and s&t work, preparation of detail estimate along with alignment plan, yard plan ,drawing for minor bridges, major bridges, rob/rub, fob, level crossing drawings, hydrological & geotechnical investigation and all other ancillary works, preparation & submission of epc tender document for all works including electrical, trd and s&t for : dum-dum junction to cc link cabin (west) 3rd & 4th line project (11.00km).
Tender For corrigendum : providing of custom bid for services - preparation of auto cad drawing,custom bid for services - making changes drawing autocad and pdf wo s,custom bid for services - tank testing and safety certificate peso,custom bid for services - site visit upto 100 km from ro,custom bid for services - site visit 100 200 km frm ro peso layout,custom bid for services - site visit bynd 200 km frm ro peso layout
Tender For providing consultancy services for construction/ redesign of circles parks city entry gates dividers including preparation of detail project report (dpr) preparation of project documents survey estimation design drawing / architectural drawing2d/3d
Tender For interior / furniture work at dcf, social forestry office, anand - wooden flooring supply & laying of 8 mm to 8.33mm thick laminated wooden flooring, classification of use 31/23 with a surface abrasion resistance of class ac4. 0.2 mm thick wear layer on top of a high density fiber substrate. plank size 1215 mm x195 to 197mm having locking arrangment with an under laying made of natural colour foam, with accessories like end profile, transition profile, reducer, stair nosing, the item including suplying and fixing of skirting profile & door profile to the flooring. etc, complete as per manufacturers specification, detailed technical specifications, drawings and as per the sr.plant/plant engineer, dcf cabin door -glass with full glass door on patch fitting : providing and fixing glass door with patch fitting door as shown in the drg. door shall consist of make 12mm thk. toughened clear float glass / or frosted glass. rate shall include necessary designer film, approved locking systems, ss handle pair, floor springs (heavy duty or equivalent), gaskets & miscellaneous hardware items. including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant. drawings and as per the sr.plant/plant engineer, pvc flooring providing & fixing 1.5 mm thk pvc vinyl planks flooring (204mm x 1239mm) looks best when laid on a beautifully smooth sub-floor, which is easily achieved with the right preparation work total thickness 2.5mm, wear layer 0.7mm,total weight 2.6kg/m sq.flooring prepared european classification 34/42(suitable for very heavy commercial and light industrial use).instaulation & design giving by architect.european classification 34/42(suitable for very heavy commercial and light industrial use), account branch a - partation half wooden partition providing and fixing low height partition with installation as per drawing and 50mmx37mm teakwood framing the skeleton (plywood+glass frame structure) with 18mm x 18mm thick (plywood, conforming is 303 bwr grade) vertical and horizontal plywood (patti) both side cover & top of low height partition 12 mm thk. teak wood arched / border patta with 6mm groove as per design. fixing properly without any air gap and finishing with selected 1mm laminate, before installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from partition including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., account branch b - new full height storage stroage rack full height storage providing and fixing full height storage up to lintel level, 50mm x 37mm teakwood framing with thick (plywood, conforming is 303 bwr grade) top and shutter 18mm made from post forming in approved shade with vertical and horizontal surface 18mm plywood with inside 0.8mm and outside 1mm laminate finish. all teakwood bidding should be finished by melamine polish with support of s.s. legs, lock, handle, etc. complete as per the architect dwgs, including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., acf cabin a - table & side unit top modification repairing & fixing main table replacement of table top by 6 mm new coariean (dupont or samsung) sheet with proper edge bending and restrengthening of entire table, replacement of drawer channels, locks,handels, keyboard trays etc.including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., curtains a - zibra zibra blind/wooden blind providing and fixing zibra blind curtain of aerolux,vista,neon,mac make or equivalant fixed on window level on wooden batten and curtain lift with cotton thin rope, design and colour as per instruction by engineer in charge with necessary hardware fitting, material and labour etc complete.approoved by engineer incharge and consultant., curtains b - roller a curtain rollar blind provi
Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and
Tender For corrigendum : conservation architectural consultancy services for condition survey and preparation of detailed project report with estimation and preparation of working drawing and supervision during works for restoration and conservation of imambara _final phase