Latest structural drawings Tenders | Government structural drawings Tenders

State Government

CTN :44779042

10 Apr, 2026 NA

Port Blair - Andaman And Nicobar Islands

Tender For development of sunset point at manjeri sub-work:- preparation of structural drawing.

CTN :44789248

14 Apr, 2026 22.2 Thousand

Kharagpur - West Bengal

Tender For corrigendum : construction of lift shaft and supply, installation, testing and commissioning of 13 passengers (884 kg) conventional luft (clear vision) in existing computer science and engineering building at iit kharagpur, west bengal.subwork/packages:sh preparation of structural drawing of lift shaft up to (g plus 2) and head room.

CTN :44789304

13 Apr, 2026 NA

Multi City - Multi State

Tender For construction of directors bungalow for iimc. sh: consultancy services for preparation and supply of necessary design & drawings, vetting of structural drawings by iit/ nit/ any government institute and preparation and submission of detailed estimate. (approx plinth area 648.20 sqm, approx length of boundary wall 142.00 m)subwork/packages:consultancy services for preparation and supply of necessary design & drawings, vetting of structural drawings by iit/ nit/ any government institute and preparation and submission of details estimate. (approx plinth area 648.20 sqm & approx. length of boundary wall 142.00 m

CTN :44789215

13 Apr, 2026 3.00 Lacs

Kutch - Gujarat

Tender For construction of annual rate contract office complex at gaduly lokdungar kutch gujarat using pre engineered steel structurs with rcc foundation ic ws si drainage system development works landscaping work construction of boundary wall cum retaining wall and electrical work i c external internal servicessh preparation of structural drawings

CTN :44789280

15 Apr, 2026 2.31 Lacs

Agra - Uttar Pradesh

Tender For construction of building for rural health research unit, icmr, at kheragarh, agra (u.p.) (sh- structural analysis and preparation of structural drawing of the building i/c plumbing, mechanical and electrical drawings as per architectural drawing)subwork/packages:civil work

CTN :44772278

13 Apr, 2026 NA

Multi City - Multi State

Tender For construction directors bungalow for iimc. sh consultancy services for preparation and supply of necessary design & drawings, vetting of structural drawings by iit, nit any government institute and preparation and submission of detailed estimate.subwork/packages:consultancy service for preparation and supply of necessary design, drawings and vetting for director bungalow.

Central Government And Public Sector

CTN :44760622

24 Apr, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

CTN :44637307

08 Apr, 2026 14.28 Lacs

Ranchi - Jharkhand

Tender For corrigendum : providing consultancy services for the preparation of structural data input, structural analysis, design and gfc vetted structural drawings for construction of regional centre for nios at murma, nagri, ranchi, jharkhand

CTN :44751165

14 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of super structure supply of combined toilet block ctb 7.32m x 7.10m x 4.40m height as per ce hq 4 corps drawing no ce 4 corps as per ts under job no 2532 , constr mtlrl cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 to 1989 make birla gold or ambuja or ultratech or jk or dalmia or acc , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40 to 63 mm graded , stone for rr masonary less than 6 inch , mild steel bar of size 6 to 8 mm dia conform to is 432 part 1 1982 make tata or sail or jsw , mild steel bar of size 10 mm dia and above conforming to is 432 part 1 1982 make tata or sail or jsw , water proofing compound conforming to is 2645 to 2003 make pidilite or dr fixit or fevicol , b and r items supply of 04 kld high altitude bio digester tank with 4 to 5 cum tank dimension 2m l x 2m b x 1m h double walled frp biodigester tank as per ts , water storage tank triple layer 1000 ltrs confirming to is 12701 to 1996 make sintex or ultrapure aqua or polywell , fabrication from structural steel section for staging of water storage tank made of capacity 500 or 1000 ltrs made out of ms angle iron frame as per ts , iwc of vitreous china squatting pan orissa pattern of size 580mmx440mm dark coloured with p or s trap make parryware or hindware as per ts , wc european type model 2008 ewc and combi flush pvc flushing cistern of 10 ltr capacity make cera or equivalent models in hindware or parryware , flushing cistern pvc combi flush model 2603 of cera flushing cistern valve less symphonic action pipe flushing cistern as per ts , looking mirror frameless of size 600x450x5mm with 4mm ply baking make prayag or saint gobin ormodigaurd , brass chromium plated towel rail 600 mm long 20 mm dia with cloth hooks make ess ess or prayag johnson suisse , chromium plated piller cock swan neck with aerator make ess ess or prayag or johnson suisse , stop cock angular type chromium plated brass 15mm weight not less then 330 gms make ess ess or prayag or johnson suisse , two way bib cock long spout brass chromium plated 15mm weight not less then 330 gm make ess ess or prayag or johnson suisse , stop cock l type chromium plated brass 15 mm make ess ess or prayag or johnson suisse , stop cock t type chromium plated brass 15 mm make ess ess or prayag or johnson suisse , bib cock long spout chrom plated 15 mm make ess ess or prayag or johnson suisse , pvc connection 45 cm long 15 mm make supreme or johnson suisse or famingo or kpt or equivalent , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms make ess ess or prayag or johnson suisse or equivalent , ppr pipe 32 mm dia make sfmc or finolex or supreme , ppr pipe 20 mm dia make sfmc or finolex or supreme , ppr socket 32 mm make sfmc or finolex or supreme , ppr elbow 90 degree 32 mm make sfmc or finolex or supreme , ppr female thread socket 20 mm dia make sfmc or finolex or supreme , ppr female thread elbow 90 degree elbow 20 mm dia make sfmc or finolex or supreme or kpt , ppr female thread t 20 mm make sfmc or finolex or supreme or kpt , ppr plain t 32 mm make sfmc or finolex or supreme or kpt , ppr reducer elbow 32mm x 20mm make sfmc or finolex or supreme or kpt , ppr union 32 mm make sfmc or finolex or supreme or kpt , tank connector 32 mm make sfmc or finolex or supreme or kpt , pvc wall clamp 32 mm make sfmc or finolex or supreme or kpt , pvc wall clamp 20 mm make sfmc or finolex or supreme or kpt , float valve 25 mm make sfmc or finolex or supreme or kpt , gate valve 32 mm make sfmc or finolex or supreme or kpt , m seal 150 gm pkt make pidilite or fevicol or m seal , taflon tape roll isi marked make supreme or omega or asbestos , solvent cement 150 gm tube make finolex or fit well or jindal , pvc waste pipe 32 mm and 1 m long make prince or finolex or supreme or kpt , chromium plated waste coupling 32 mm dia make supreme or johnson suisse or famingo or kpt , non ski

corporations/Associations/Others

CTN :44749878

08 Apr, 2026 1.87 Lacs

Chandigarh - Chandigarh

Tender For e-quotation for structural drawing/ design for construction of community centre sector -63, u.t., chandigarh.

Structural Drawings Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

corporations/Associations/Others