Latest structural platform Tenders | Government structural platform Tenders

Central Government/Public Sector

CTN :41759290

30 Sep, 2025 21.63 Lacs

East Singhbhum - Jharkhand

Tender For tender for supply of 33kv line maintenance between jaduguda and narwapahar for two years : : - replacement of 33kv pin insulator including supply of necessary fixing materials. this includes binding of acsr dog conductor also , replacement of 33kv disc insulator including supply of necessary fixing materials in existing 33kv line , replacement of 33kv cross arm including supply of necessary fixing materials , replacement of packing pieces in existing cross arms , replacement of pg clamp for dog conductor including supply of necessary fixing materials , installation of complete stay set including supply of necessary fixing materials. this includes digging of stay pits and grouting of stay rod in cement concrete foundation also as required , installation of gi wire 7/10 swg for stay including supply of necessary fixing materials , installation of gi wire 8 swg for guard wire , installation of gi wire 7/14 swg for earth wire including supply of necessary fixing materials , replacement of back clamp for cross arm & top bracket (50mm x 10mm flat) including supply of necessary fixing materials , installation of d.p. channel (100mm x 50mm x 6mm) 1 x 3 mtrs including supply of necessary fixing materials , installation of d.p. channel support clamps including supply of necessary fixing materials , replacement of earth clamps for earth wire including supply of necessary fixing materials , replacement of side stay clamp including supply of necessary fixing materials , replacement of angle stay clamp including supply of necessary fixing materials , replacement of cross bracing for d.p. structure including supply of necessary fixing materials , replacement of clamp for x-bracing including supply of necessary fixing materials , installation of earthing pit using pipe earth electrode as per drawing including connection to earth wires and supply of necessary materials required it , laying & tensioning of acsr dog conductor including fixing / binding at insulators in the 33kv line (per km consist 3 conductor of ryb phases). , tensioning of dog conductor and supporting & fixing on insulators including binding as required in the section (per km consist 3 conductor of ryb phases). , cutting and removal of hages , trimming of trees and branches of size more than 4inch dia and disposal of un-serviceable materials to ucil canteen building as per direction of eic , cutting and clearing jungle grass including uprooting of rank kegetation , long grass , bush wood , trees and saplings upto 4inch dia measured at a height of 1 meter above ground level as per direction of eic , erection of m.s. rail pole 105 lbs , 13 meters long including drilling of 2 nos holes of 5/8inch dia as required at one end of rail pole for fixing of f- clamps , installation of ab switch on double pole structure. this includes fixing of required channels and clamps and other fixing as required and for proper operation. this includes connection of dog conductor alsodog conductor also , installation of 33kv lighting arrestor on double pole completed with line and earth connections , maintenance of ab switch on double pole structure , 33kv line patrolling from narwapahar to jaduguda , replacement of earth spike along the 33kv line & connection to pole , number of rail pole with painting of pole upto 6 feet height for colour coding of line

Central Government / Public Sector

CTN :41736530

16 Sep, 2025 25.54 Crore

Panipat - Haryana

Tender For structural platform, equipment, piping activities of fcc including crlpgtu and miscellaneous piping works for indmax unit at panipat refinery (p-25 project work), panipat refinery

corporations/Associations/Others

CTN :41516898

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For corrigendum : supply of de-centralized materials and works for increasing capacity and installation of tf under business plan 2025-26, edd-kachhawa - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, x-arms holding clamps with bolts & nuts, f-bracket with bolts & nuts, top, dropper channel clamp with bolts & nuts for st pole, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, p.g clamps for weasel conductor, danger board with clamp & bolts, dead end clamp for pole/bracket with nuts & bolts, eye- hook, suspension clamp with nuts & bolts, j hook, all. binding wire 6 mm, 1x35 sq mm ac cable (xlpe), three phase distribution box, three phase distribution box clamp (ls), e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 120 mm2, all lugs 70 mm2, stay clamp with nut & bolts for st pole, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., st poles 11 mtr long, pcc poles 8.5 mtr long, all line materials with acsr weasel conductor, arial bunch cable 3x50+1x35+1x16 mm2, arial bunch cable 3x95+1x70+1x16 mm2, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of single support st/pcc pole for construction of 11 kv/lt line including digging of pit, fitting of all accessories, back filling of earth & others required work as per resspo norms., grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per resspo norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), earthing of poles as per resspo norms, stringing & sagging of 3 phase 11 kv line upto proper sag including laying of acsr weasel conductor, binding with insulators & jumpering as per resspo norms, laying, streaching of arial bunch cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per resspo norms, erection of sectional double pole structure of st pole for distribution t/f, including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm wi

corporations/Associations/Others

CTN :41525709

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For : details supply of de-centralized materials & works for increasing capacity & installation of t/f under business plan 2025-26 edd-chunar - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 70/95/120 mm2, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., pcc poles 8.5 mtr long, line materials with acsr weasel conductor, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing including cost of all materials., mounting of 25 kva transformer as per resspo norms, mounting of 63 kva transformer as per resspo norms, mounting of 100 kva transformer as per resspo norms, mounting of 250 kva transformer as per resspo norms, cartage of received back 10 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 16 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 25 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 63 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 100 kva transformer from work site to esc, mirzapur including loading & unloading charge

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

Central Government/Public Sector

CTN :41624803

10 Sep, 2025 NA

Kannur - Kerala

Tender For tice for supply & installation of printing materials converge id card-student-950 , converge id card-teacher-100 , converge id card-staff-200 , converge id card volunteers-200 nos service providers-175 , handbands-student , handbands teachers , handbands-staff , handbands volunteers-250 nos , placard-cultural walk , placard-transport committee , placard-any other requirement? , food coupons-student-5 times (950) , food coupons-teachers 5. times (38 for 18 centres + 62 nift kannur faculty and staff) , food coupons staff-5 times (38 for 19 centres 162 for kannur staff) , food coupons volunteers-250 nos-5 times (nift kannur students) , physical invitation card with cover , rulebook , 10 nos with silver embossing for cover page only and 10 nos with normal printing as per specifcations , event schedule/brochure-teachers , velcome note teachers , 17. university ground-student entrance - extreme end gate-direction, with gi frame and with fabric material with installation and the material should be taken back by the supplier , 18. university ground-big converge branding with gl frame and with fabric material with installation and the material should be aken back by the supplier , 19. university main stage sunshade covering with fabric material , 20. university main stage - background fabric material with gi frame and with fabric material with installation and the material should be taken back by the supplier , 21. university main stage - hand railing cover centre skirting with foam board with instilation and the material should be taken back by the supplier , 22. university main stage - hand ralling cover side skirting with instilation and the material should be taken back by the supplier , 23. university main stage-adjacent bleachers-wall foam boards with instilation and the material should be taken back by the supplier , 4. university main ground - green grill mesh barricades-skirting with branding with installation and the material should be taken back by the supplier , 5. university main ground - selfie point - indivisual/small group. fabric material with gl frame with installation and the material should be taken back by the supplier , 26. university main ground-backdrop wall photobooth-big groups , abric material with gl frame with installation and the material should be taken back by the supplier , 27. unniversity main stage-stage panels , fabric material with gi frame with installation and the material should be taken back by the supplier , standees to be placed in various points in and around campus. fabric material with gl frame with installation and the material should be taken back by the supplier , foam board display , fabric material display along with gl frame with installation and the material should be taken back by the supplier , auditorium backdrop with fabric material along with installation , cuboid totem structures alongwith gi fabrication , 2 foam boards of 2x2 ft sizes , foram boards of 4x2 ft sizes , the same should be inserted in the structures , nift campus-selfie point - individual/small group , fabric material along with gl frame and with fabric material with mstallation and the material should be taken back by the supplier , nift campus-backdrop wall photobooth - big groups , fabric material along with gi frame and with fabric material with stallation and the material should be taken back by the supplier , 10. nift campus map print-vinyl print , along with installation , flags-tall pole- , 20 nos at kannur university ground on rental basis , flags , nift campus-20 nos , handheld flags-20 nos , kannur university-20 nos , vertical hanging banner-foyer structure top edge- , horizontal banner above the auditorium gate with converge branding print , fabric material with installation , wayfinders installations-foamboards along with installation

CTN :41587309

16 Sep, 2025 5.49 Crore

Gorakhpur - Uttar Pradesh

Tender For supply of supply and fixing of odop cfc plant and machinery for wooden furniture d d - air compressor stand machine , high speed beam saw with optimization software , single sided high seed auto edge bander pre , hydraulic cold press - 50ton and 2 cylinders , triple head multi boring 21x3 - 63 spindles , cnc router- working area 1300 mm x 2500 mm , panel saw 3200x410mm - 7.5hp motor , semi-auto curvilinear edge bander 0.5-2mm , dust collector 7.5hp double bag heavy duty , dust collector 5hp double bag heavy duty , dust collector 3hp double bag , 250 kva transformer level-02 , st pole 11 mtr. long , acsr weasel conductor , gi pipe , 11 kv pin insulator with pin , 11 kv pin insulator with fitting , v type 11 kv x arm , earthing complete , 11 kv 3x70 sqmm cable uppcl approved make , cable joining kit 3x70 sqmm uppcl approved make , 11 kv tpmo fixing with all material , stay complete , t-off channel , top channel , cu. z clamp , f-bracket , droper angle , clamp for top droper x-arm and t-off and cable support clamp , nut bolt of different size , erecion of double pole structure on st pole 11 mtr , laying of 3x70 sqmm xlpe cable with gi pipe , erection of single st pole 11 mtr , erection of earthing of pole with g.i. wire and rod , chemical earthing of 250 kva distrution transformer , making of 11 kv xlpe indoor kit and outdoor kits in taping of cable providing fixinging and crimping of proper size good quality lugs , painting of pole by double coating aluminum and red oxide paint , fabrication errection commissioning and testing of 250 kva , construction of t or f plinth of size 2x2x1.2 mtr , grill fencing of 11 or 0.4 kv , 500 cft-i and c - seasoning kiln steam heated , 500 cft-i and c - installation and commissiong charges , wk-610 20 hp 15hp 3hp 1 or 2h - auto double surface planer , wr-20 15hp 2hp - straight line rip saw , cc-06-08-hydraulic - hydraulic clamp carrier , an-030-5 mtr- auto glue spreader , hs-625ts - tilting spindle shaper 7.5hp , fsm-520at - four side moulder with five , yr-750 - sliding head router , yrt-115 - rectangular tenoner , yom-120 - oscillation mortiser , hcs-18-w or all optionspneumatic cross cut off saw , dt-1136 - automatic copy shaper , gs-6213-with frequency control - double face glue spreader , pr-52nda - spiral cutter head planer sander , cdt-3155a - cnc dovetail tenoner , servokon make 100 kva 250- 480 or 400v 3 phase digital micro , civil work for seasoning plant , genset 160 kva //bid details 2 / 46

Central Government And Public Sector

CTN :41190432

09 Sep, 2025 4.65 Crore

Kalpakkam - Tamil Nadu

Tender For corrigendum : structural platform, frp lining for ug rcc tanks and civil finishing works in various plant buildings at frfcf project site, kalpakkam

Central Government And Public Sector

CTN :41553286

15 Sep, 2025 5.37 Lacs

Ahmedabad - Gujarat

Tender For supply of sitc 4 no 3tr ductable ac units at ngn naranpura ahmd : : - supply 3 tr non inverter ductable ac , itc 3 tr non inverter ductable ac , s fixing copper piping 0.75 inch , s fixing copper piping 0.625 inch , sl 4c 4 sq mm copper pvc insu cable , sl 3c 2.5 sq mm copper pvc insu cable , sl 25 mm dia heavy pvc drain pipe , pvdg ms structure incl cutting etc , coveringopen space by boards etc , pvdg 8way double door db tpnmcbdb , sf 5 to 32 a mcb , sf 4 pole 63 a isolator , sf blanking plate in db , p laying 8 swg gi earth wire , pf prefo cable tray 150mm w 50 mm depth 1.6 mm t

Structural Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors