Latest structural steel Tenders | Government structural steel Tenders

State Government

CTN :43234974

12 Jan, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of supply assembly erection testing and commissioning of air source heat pump water heater capacity is 500 litre type is v hp 500 immersion heaters heating capacity w is 5800 w , providing and placing on terrace at all floor levels polyethylene water storage tank isi is 12701 marked with cover and suitable locking arrangement and making necessary holes , providing and fixing ptmt extension nipple for water tank pipe fittings of approved quality and colour 25 mm nominal bore weighing not less than 62gms , providing and fixing gi pipes complete with gi fittings and clamps including cutting and making good the walls etc internal work exposed on wall 25 mm dia nominal bore medium , providing and fixing g i union in g i pipe including cutting and threading the pipe and making long screws etc complete new work 25 mm nominal bore , providing and fixing gate valve with of approved quality 25 mm nominal bore , providing and fixing ball valve brass of approved quality high or low pressure with plastic floats complete 25 mm nominal bore , providing and fixing polyethylene aluminum polyethylene pe alpe composite pressure pipes conforming to is is 15450 uv stabilized with carbon black having thermal stability , steel work welded in built up sections framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required

CTN :43529581

20 Jan, 2026 NA

Multi City - Multi State

Tender For supply of angle iron post made of structural steel angle,angle iron post,angle iron post made,angle iron post made of,angle iron strut picket of structural,punched tape concertina coil,galvanised steel barbed wire,manufactured sand,aggregate 20mm,aggregate 40mm,ms binding wire,quick setting compound,gluphosate root out

CTN :43395152

12 Jan, 2026 3.10 Crore

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply and delivery of 16 nos of 16 cum capacity heavy duty dis mountable or portable compactor will be fabricated from ms structural steel mounted on 28 ton gvw chassis to greater visakhapatnam municipal corporation under 15th finance commission grants 2023-24

CTN :43497563

29 Jan, 2026 NA

Mumbai - Maharashtra

Tender For term contract for carrying out structural steel work at aiesl engineering premises, oap, mumbai-40029

CTN :43516613

16 Jan, 2026 46.68 Lacs

Shimla - Himachal Pradesh

Tender For m/r to dpra under phagli sections, shimla during 2025-26. sh: repair/renovation of existing open play area including covering of open area with m.s. structure, roofing, flooring, covering of sides at lalpani, shimla (h.p.)

CTN :43493367

09 Feb, 2026 30.00 Lacs

Sehore - Madhya Pradesh

Tender For inviting supply rate of construction material and hiring of machince on rent for financial year 2026-27 in office of nagar parisad rehti - supply of narmada river sand,supply of morrum,supply of hard copra,supply of black cotton soil,supply of soft soil (kapa),supply of ppc cement bag 50 kg,supply of structural steel like hollow rectangular or square and angel section,supply of binding wire & centering pin,supply of fencing wire,supply of fencing mesh,stone dust

CTN :43512319

19 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For manufacturing testing inspection and supply of structural steel of various sizes for our hmb project hpcl visakhapatnam

CTN :43206566

12 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

CTN :43502316

19 Jan, 2026 NA

Imphal - Manipur

Tender For supply of structural steel work ms tubular post truss purlins , modular pvc wall panelling , aluminium u channel , aluminium 2 tier sliding channel , aluminium t channel , aluminium tower , binding wire , tapping screw , star screw , nails , mdf pre laminated particle board , synthetic enamel paint , thinner , paint brush , red oxide , nut and bolt 8mm , welding rod , iron cutter , drill bit , iron grinding , welding machine , black cushion chair , mat brown , jute mat , ply wood

Central Government/Public Sector

CTN :43375505

17 Jan, 2026 NA

Yamunanagar - Haryana

Tender For corrigendum : main plant civil, structural steel erection and architectural works (transformer yard to chimney) at 1x800mw dcrtpp, hpgcl, yamuna nagar, haryana, india

Structural Steel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector