Latest support plate Tenders | Government support plate Tenders

CTN :40062284

21 May, 2025 5.00 Crore

Jodhpur - Rajasthan

Tender For supply of cardiology implants and equipmets, high pressure lineavailable in 150cm and 200cm, made of branded pvc, very flexibleand pressure should hold up to 1200psi with leur lock on one side and collerfillting on other side., radial introducer needle 18g, 32mm length, inner diameter 1.3mm, braided long sheath*atraumatic tip for carotid & distal procedures*hemostatic valves to prevent back leak and air aspiration.with tbv detachable valve for thrombus management *gold coil marker for distal visibility, distal hydrophilic coating *ptfe coating seamless device transition* available in diameter 6,7,8 f and length 45cm,65cm & 90cm.* with suture eye for securing sheath.nylon out layer with stainless steel coil * with internal side port with attached 3 way stopcock., radial artery haemostasis device- (t.r. band) consists of two balloons specially designed for spot compression of the radial puncture site. must have belt magic tape for fast application. must have curved support plate. must have green positioning marker. must be available in 2 sizes 24cm and 29cm usfda/pmda approved, hydrophilic guidewire with mcoat technology tapered tip, (regular length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032, .038, .025, .018 diameter and 150 cm, 180 cm length - straight / angled / 1.5 mm j shape usfda approved, hydrophilic guidewire with mcoat technology tapered tip, (exchange length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032,.035, .038, .025, .018 diameter and 260 cm length - straight / angled / 1.5 mm j shape usfda approved, hydrophilic guidewire with mcoat technology tapered tip, (regular length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032, .038, .025, .018 diameter and 150 cm, 180 cm length - straight / angled / 1.5 mm j shape pmda approved, hydrophilic guidewire with mcoat technology tapered tip, (exchange length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032,.035, .038, .025, .018 diameter and 260 cm length - straight / angled / 1.5 mm j shape pmda approved, baby j wire (180 cm) with radius of 1.5mm j tip, (regular length) must have tungsten-infused polyurethane jacket. baby j curve must have radius of 1.5 mm. super elastic nitinol alloy, m coat hydrophilic coat, one piece construction for 1:1 torque & radiopaque polyurethane jacket. usfda/pmda approved, baby j wire (300 cm) with radius of 1.5mm j tip, (exchange length) must have tungsten-infused polyurethane jacket. baby j curve must have radius of 1.5 mm. super elastic nitinol alloy, m coat hydrophilic coat, one piece construction for 1:1 torque & radiopaque polyurethane jacket. usfda/pmda approved, guide wire hydrophillic coated 0.0 32x150 cm polyurathane jacket.glider torque devices. super elastic nitinol core. eurepean ce, special slender sheath (gss) for trans radial rootmust have unique thin wall technology reducing the outer diameter by 1 fr size whilst maintaining the one size lager inner diameter. must have 7fr sheath with outer diameter of 2.8mm, 6fr with od of 2.46 mm & 5fr with od of 2.13mm. hydrophilic m coating with 20/21g surflash needle and tif tip technology which provide optimal tapering design.usfda/pmda approved, radial sheath with puncture needlestandard length includesurflash 20g*2 entry needle (plastic iv catheter) and 0.025 mini plastic guidewire.radial introducer

Central Government/Public Sector

CTN :39711499

21 Apr, 2025 NA

Varanasi - Uttar Pradesh

Tender For bid to ras bid to ras tender for supply of fabricated and machined components - deflector link lever , keeper ring , cover packing gland , oil seal keeper , j cap sc lock plate , fully machined lock nut grinding roll , support plate , thrust plate , pr spring clamp , jr brg keeper , fully machined dust guard assly , piping assy , handle nut m16 , link rod assly , thrust plate , valve lever , deflector hinge shaft , cylindrical pin , deflector hinge shaft , journal bearing collar , journal bearing spacer , fully machined journal head adapter , journal head insert key

Co-operative

CTN :40022918

21 Apr, 2025 3.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of cost iron items for season 2025-26 - a. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc with new casting, b. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc on conversion basis., c. machining charges (if required), supply of boiler material on conversion basis composition is210 grade 25cr, 1.2 suitable to with stands 1000 degree c. temp., a. ci furnace grate bar, b. ci furnace grate bar jally, c. ci furnace grate bar holder, d. ci furnace nozzle, e.ci mouth piece, f. ci bag furnace chute, g. ci hanger, supply of ci v grove pully with new casting, supply of ci v grove pully on conversion basis., supply of ci bearing housing for magma mixer with new casting, supply of ci bearing housing for magma mixer on conversion basis, supply of ci duck foot bend upto size 12" on conversion basis, ms scrapper for under feed roller material is2060 (sail) pitch 70mm as per drg no. 10/6/04m grooving details as per drg no. 8/9/19, cast steel worm for crystallizer as per drg no. 90/08/17, cast steel gear 48 teeth for magma mixer as per drg no. 2k1/10/90, cast steel pinion 19 teeth as per drg no. 15/7/86b, cast steel pinion 19 teeth as per drg no. 15/7/86c, cast steel helical pinion 12 teeth as per drg material en-8, en-8 spidle with gear for super heater drain valve teeth 10 as per drg, ms fins for steam seprator for boiler furnace, cast steel sporket for mud mixture as per drg no. 05/06/09, ms sprocket as per drg no. 16/8/06d item no. a (95 teeth), ms sporcket as per drg no. 16/8/06d item no. b, cast irom worm wheel for 60 ton crystillizer od 1362mm x bore 150.6 mm x no. of teeth 72 as per drg. no. 17/8/13c, ci pulleysize od 380 mmwidth 70 mm03 nos. v groove as per drg. n o. 06/7/0r(drawing enclosed), ci pulleysize od 602 mmwidth 112 mm04 nos. v groove as per drg. n o. 07/8/07(drawing enclosed), cast steel worm for 60 ton crystallizer od 220mm as per drg no. 17/8/13c (b), hanger with nut for super heater coil of new boiler cap. 40 ton/hr pr. 45 kg./cm2 material ss-316l, cast steel driving sprocket 17 no. teeth 76.2mm pitch as per drg. no. 17/05/3m item no. 02, cast iron pulley for c-1 c/f machine od 260 dia , 08 no. v groove, b section belt as per drg. no. 19/08/14 c/f , dynamically balanced, c. i clamp for boiler no. 01 & 02 as per drg. no. r/89/07/36/90, c. i clamp for beam of boiler no. 01 & 02 (complete set with bolt & nut), (a) as per drg. no. 89/07/35a ( 01 of 02), (b) as per drg. no. 89/07/35a ( 02 of 02), c.i supporting hanger for furnace beam of boiler no. 01 as per drg., c.i furnace hanger of back side beam for boiler no. 01& 02 as per drg., c.i plate for boiler no. 03 as per drg. no. 18/92/7/rev., c.i supporting clit for furnace as per drg. l-30 nos., r-30 nos., c.i supporting plate of furnace beam for boiler no. 04 as per drg., c.i grade bar (stocker) for boiler no. 03 as per drg. no. 91/01/01 suitable for 600 degree c. temp., c.i supporting plate for window near supper heater coil of boiler no. 03 size length - 760mm x width 500 mm x thick 25 mm, c.i tunion bar for new boiler as per drg. no. 2k1/09/83, c.i attachment of tunion of boiler no. 4& 5 as per drg. , cost steel worm no. of teeth 04, pitch 64, bore 80mm, od 220 dia, width 250mm as per drg. no. 90/08/17, supply of cast steel tape wedge block for mill as per mill drawing suitable for 5000 tcd plant, burning loss @ % on conversion basis item only

CTN :40025104

06 May, 2025 30.66 Lacs

Delhi - Delhi

Tender For supply of electrical infrastructure in room w 422 for ilms - sitc submain wiring , sitc circuit wiring , 6 a switch modular , 16 a switch modular , 6 a socket modular , 16 a socket modular , telephone socket , tv antenna socket , electronic fan regulator , gi box 2 module , gi box 3 module , gi box 6 module , tv cable , pvc conduit 20 mm , pvc conduit 25 mm , pvc conduit 32 mm , 1 run of utp cable , 2 run of utp cable , 3 run of utp cable , spn industrial type socket , tpn mcb db 200a , sp mcb 5 to 32a , tpn mcb 5 to 32a , gi race way , pvc dlp , 3 module support plate , xlpe power cable on wall , xlpe power cable on cable tray , end termination , sitc earthing with copper earth plate , sitc copper strip , xlpe 95 sqmm cable , sitc lt panel , modification of existing panel , ms cable trays

Central Government/Public Sector

CTN :39297986

21 Apr, 2025 NA

Bokaro - Jharkhand

Tender For corrigendum : supply of pusher lever-1 , pusher lever-2 , sliding support plate , pusher guide liner rail , piler guide liner plate

Central Government/Public Sector

CTN :40003505

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of 1.bush for bolt of clutch/brake plate 2.supporting plates of hose carrier system

Central Government / Public Sector

CTN :39860336

21 Apr, 2025 NA

Secunderabad - Telangana

Tender For corrigendum : supply of set of door latch assembly for sb & hb doors of three phase locomotives as per ref.no.1 to 7 of els/lgd drg.no.c/els/lgd/b.f/3/ 42. one set consisting of (1) base plate as per is:6603.ref.no.1.-01 no./set. (2)lock plate as per is:6603.ref.no.2.-01 no./set. (3) support plate as per is:6603.ref.no.3.-01 no./set. (4) fixing screw as per is:1364/1367.ref.no.4.-04 nos./set. (5) flat washer as per is:2016.ref.no.5.-04 nos./set. (6) spring washer as per is:3063.ref.no.6.-04 nos./set. (7) hex. nut as per is:1364/1367.ref.no.7.-04 nos./set [ warranty period: 30 months aft er the date of delivery ]

CTN :39965119

29 Apr, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For tender for supply of edc pump rep kit , supply pump , roller set , head , cam plate , piston , accelerator bush , supporting plate

CTN :39855481

21 Apr, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of b and d spares of helo inflight fueling rig (hifr) - b&d spares ro palnt, gasket, circlip, spring, spg. washer/bonded seal, valve seal, spindle seal, spring, o ring, plain washer, seal, o ring, spring, o ring, spring retainer, circlip, stiff nut m6, plain washer, o ring, circlip, gasket, spring, circlip, o ring for piston, o ring for sleeve, o ring for bracket, diaphram, gasket for top flange, bonded seal, thread seal tape, locking pin/screw, o ring, o ring for top flange, o ring, bonded seal (popet seal), sealing ring, spring, circlip, spring, spring washer, valve seal, spring, spindle seal (bonded), seal, circlip, shim, o ring, spring, o ring, seal, gasket, seal, circlips, o ring, gasket, o ring, stainer, seal, gasket, gasket, o ring, o ring, o ring, spring, spring, o ring, earthing cable, teflon seal, gasket, gasket, pressure gauge, sealing ring for nozzel, sealing ring, o ring, hex head screw, o ring, oil seal, gasket, grease nipple, bolt assy., gasket, stainer, elbow assembly, lifting eye, screwed pin, lbc nozzel assembly, spider, spindle, spring retainer, valve half (inner), valve half (outer), valve tube, plunger housing, punger with head, taper pin, allen bolt, stiff nut, sinker weight assy., balls, retainer, shim, lbc adaptor assy., spindle, spider, coller, nr valve assy., spider, valve, retainer, spindle, retainer, long hose 50mm nb x 30 mtrs. long, o ring, sleeve, union, hose end pressure controller with staine, piston, piston rod, support plate, lock nut for piston, allen bolt, allen bolt ( body cover ), air connecting nipple, pressure gauge for air, pressure gauge for oil, allen bolt for sleeve, allen bolt, sleeve, special bolt, special screw, bush for spindle boss, spindle, pinion, sealing nut, spindle nut, allen bolt, allen bolt, adaptor assembly, bolt m6, 3-lug adaptor (m), plain washer, allen bolt, spindle, spring retainer, pressure plate, allen bolt, upb nozzle assembly, spider, spindle, plunger housing, spacial bolts, ball, stiff nut, washer, hook, spider, upper elbow assembly, vent valve body, nr valve assy., spindle, popet, spring, swivel price (swivel coupling assu.), adaptor, union, ball, short hose (3 mtrs ) with end connection, union, adapter assy., hose reel assy. (without hose), aircraft coupling, swivel adapter, valve retainer, 3-lug adaptor (f), valve, handle, thrust plate, cam follwer, roller for pin, allen bolt, allen screw, allen screw, screwed pin, screw, spherical balls, screw, screw, guard ring (hood), pressure blank (protecting cover assy.), allen bolt, chain for pressure blank, lower deck coupling, quick acting coupling body (m), union, quick acting coupling body (f), pull off tester (test rig) (test kit for, hydraulic pump, open shut cock, fule flow meter, tapper roller bearing, adapter gasket, 1-1/2n bsp male adaptor (union), rfuleling / trigger nozzle (1-1/2m), defueling nozzle(1-1/2m), shakle point (liftring eye ), locking mechanism for hose end pr.contro, rack, cam coupling