Latest surge arrestor Tenders | Government surge arrestor Tenders

State Government

CTN :43185922

22 Dec, 2025 NA

Gadchiroli - Maharashtra

Tender For supply, erection, testing and successfully commissioning for surge protection system comprising of bladder vessel with load cell arrangement and three stage surge suppression air valve for reguntha lis

Central Government/Public Sector

CTN :43188801

02 Jan, 2026 NA

Raebareli - Uttar Pradesh

Tender For supply of 400kv surge arrestor

CTN :43195240

26 Dec, 2025 NA

Kharagpur - West Bengal

Tender For supply of inductive shunt assembly (sj) type: nr 59 a1 to clw drg. no. 2twd.133.021, alt-3 confirming to clw spec.no. 4tes.133.001, alt-7 (surge arrestor)

Central Government And Public Sector

CTN :43195500

05 Jan, 2026 NA

Tinsukia - Assam

Tender For high availability single section digital axle counters (hassdac) with dual sensor system as per rdso/spn/177/2012 version 3 or latest. this includes the supply of high frequency web mounting type tx coil/rx coil, vr/pr box duly wired, vital relays, pr relays, clamp with deflector plates & hardware. dual display reset box with auto resetting facility, surge voltage protection devices and filter card to be mounted on din rail etc as per oem for complete intallation & testing & commissioning of (hassdac) system note; one set of hassdac system will include equipment required to monitor one up line or one dn line of a full block section between two stations. inspection rdso

CTN :43195585

15 Jan, 2026 NA

Kharagpur - West Bengal

Tender For supply of battery surge arrestor etc.

Central Government/Public Sector

CTN :43195755

23 Dec, 2025 NA

Bengaluru - Karnataka

Tender For supply of surge arrestor for current transformer

corporations/Associations/Others

CTN :43139263

24 Dec, 2025 49.94 Lacs

Puruliya - West Bengal

Tender For tender for supply of procurement of different type of cards for msdac and ssdac system for dvc rtps : : - micro controller logic card no.3 (mlb3) for cel make 55dac systems as per rdso specn. no rdso/spn/177/2012 ver.3 or latest, micro controller logic card no.4 (ml82) for cel make s5dac systems as per rdso specn. no rdso/spn/177/2012 ver.3 or latest., surge voltage protection device box sv-121 for ssdac as per roso specn. no. rdsospn/177/2012 ver.3 or latest, modem card for field unit of multi section digital axle counter as per rdso spec. no. rdso/spn/176/2013 ver. 03 or latest., sm panel card (supply) for multi section digital axle counter systems as per rdso specn. no. rdso/spn/176/2013 or latest., dual micro controller logic card for field unit of multi section digital axle counter systems as per rdso, evaluator card (em08) for central evaluator unit of multi section digital axle counter systems as per rdso specn. no. rdso/spn/176/2013 or latest., scc1 for field unit of multi section digital axle counter systems as per rdso, dc-dc converter card for field unit of multi sectiondigital axle counter systerns as per rdso, high voltage dc-dc converter module dc 210 for converting 24 v dc to 96 v dc of multi section digital axle counter systems as per rdso specn. no. rdso/spn/176/2013 or latest., scc2 for field unit of multi section digital axle counter systems as per rdso, high frequency tx coil and rx coil (each set consists of web mounting type tx coils 01 no, rx coils -01 no 15 mtr)-one set for multi section digital axle counter systems as per rdso specn. no. bdso/spn/176/2013 or latest., sm panel card (8 ch. reset) for multi section digital axle counter systems as per rdso specn. no rdso/spn/176/2013 or latest., rs 422 card for multi section digital axle counter systems as per rdso specn. no. rdso/spn/176/2013 or latest., double rail contact assembly with track side el for msdac cel make as per roso spec. no. rdso/spn/176/2013 or latest. each set shall consist of track side electronic unit (field unit), double rail contact (web mounting type 01 no. of tx coil and 01 no. of rx coil) with cable and mounting accessories, make-central electronics ltd., medel field unit for msdac fu 220 version no.-0015001h01, supply of single section digital axle counter (ssdac) as per rdso specn. no. rdso/spn/177/2012 ver. 03 or latest, make-central electronics ltd, model-field unit for 55dac dacf-710p

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c