Tender For supply of 2015 mf lp mt c c > f> f- accelerator padel for avish gpu , control panel 560 x 260 engine and ac dc output contr panel and metering assy complete for avish gpu , engine start switch for avish gpu , engine stop switch for avish gpu , lamp 24 v red for avish gpu , lamp 24 v yellow avish gpu
Tender For supply, installation, testing and commissioning of 3 kwp grid tied solar power panel with net metering system at fatikroy post office, under dharmanagar division.
Tender For supply, installation, testing and commissioning of 3 kwp grid tied solar power panel with net metering system at rynjah post office, under meghalaya division.
Tender For supply, installation, testing and commissioning of 3 kwp grid tied solar power panel with net metering system at namsai post office, under arunachal division.
Tender For supply, installation, testing and commissioning of 5 kwp grid tied solar power panel with net metering system at serampore ho building, south hooghly division.
Tender For supply of dsitc of 40kw pv solar plant at fire station building , dsitc of 10kw pv solar plant at power house building. , supply, installation, testing and commissioning of acdb panel. , net metering arrangement and liaising charges with dept of power nagaland. , supply of 3.5 x 185 sq.mm xlpe insulated armoured , laying of one number xlpe armoured power cable in open duct above 95 sq. mm and upto 185 sq. mm , laying of one number xlpe armoured power cable in open duct upto 35 sq. mm , laying and fixing of one number xlpe armoured power cable in cable tray above 95 sq. mm and upto 185 sq. mm , laying and fixing of one number xlpe armoured power cable in cable tray upto 35 sq. mm clamped with 1mm thick shaddle. , laying of one number xlpe armoured power cable in the existing pipe as required above 95 sq. mm and upto 185 sq. mm , supplying and laying of 120 mm dia dwc hdpe pipe direct in ground. , supplying and making end termination 3.5 x 185 sq.mm , supplying and making end termination 3.5 x 35 sq.mm , providing, laying and fixing of 100 mm dia gi pipe , sitc of smart rfid based electronic cable marker 220 mm dia , operation and aicmc 1st year after dlp , operation and aicmc 2nd year after dlp. , operation and aicmc 3rd year after dlp , operation and aicmc 4th year after dlp , operation and aicmc 5th year after dlp
Tender For corrigendum : for supply of various type material for maintenance & repair of lt ug distribution pannels by distributing of lt underground cable to maintain un interrupted supply in the jurisdiction of ee, edd-mehmoodabad, sitapur - supply of outdoor type lt disribution boards with a rupturing capacity of 50ka at 415v or as called for individual items (cpri approved manufacturer), openable in front and back suitable for 3 phase, 4 wire, 50hz ac supply and an ambient temperature of 45 deg. c. the cubicle should be weather proof, dust proof, vermin proof and enclosure protection shall be ip-55 as per is 2147-1962 and is: 8623. the panels/switches boards shall be fabricated out of 14-swg crca sheet steel and provided with 16 swg hinged doors including suitable foundation two earthing electrode 20mm with clamps and 50x6 mm gi strip. main lt panel at sub station- 250 kva (type a-2)incomer- 1 set of 800 amp. tp mccb with spreader & extended handlemetering on incomer - 1 set of digital ammeter with ass - 1 set of digital voltmeter with vss - 1 set of led type phase indicating light (22.5 mm.) with control mcbsoutgoing- 6 set of 250 amp. tp mccb with spreader & extended handle ( 5 nos. + 1 no. for capacitor panel) - 2 set of 100 amp. tp mccb with spreader & extended handle (as per gtp approved by mvvnl) ( all materials provided by contractor), supply of outdoor type lt disribution boards with a rupturing capacity of 50ka at 415v or as called for individual items (cpri approved manufacturer), openable in front and back suitable for 3 plase, 4 wire, 50hz ac supply and an ambient temperature of 45 deg. c. the cubicle should be weather proof, dust proof, vermin proof and enclosure protection shall be ip-55 as per is 2147-1962 and is: 8623. the panels/switches boards shall be fabricated out of 14-swg crca sheet steel and provided with 16 swg hinged doors including suitable foundation with two earthing electrode 20mm with clamps and 50x6 mm gi strip. main lt panel at sub station- 100 kva (type a-5)incomer- 1 set of 250 amp. tp mccb with spreader & extended handle metering on incomer - 1 set of digital ammeter with ass - 1 set of digital voltmeter with vss - 1 set of led type phase indicating light (22.5 mm.) with control mcbsoutgoing- 3 set of 63 amp. tp mccb with spreader & extended handle ( 2 nos. + 1 no. for capacitor panel) . - 3 set of 100 amp. tp mccb with spreader & extended handle (as per gtp approved by mvvnl) ( all materials provided by contractor), supply of lockable distribution boxes of size 450x400mm including suitable foundation and one earthing electrode 20mm with clamps and 50x6 mm gi strip with bus bar 100 amp. tpn to feed upto 10 houses including structure (of ms angle 65x65x6) for ground mounting with proper grouting (type c) (as per gtp approved by mvvnl) ( all materials provided by contractor)