Latest suspended access equipment Tenders | Government suspended access equipment Tenders

corporations/Associations/Others

CTN :43528167

21 Jan, 2026 15.80 Lacs

Madurai - Tamil Nadu

Tender For fabrication and supply of stainless steel cabin for dog travelling vehicle on chassis supplied by madurai corporation 2no s

Central Government / Public Sector

CTN :43493982

29 Jan, 2026 NA

Ernakulam - Kerala

Tender For kac 11- procurement, fabrication and erection of fire stair at vadakkekotta and sn junction metro station including foundation, supports, painting etc. and any other allied works related to steel and civil works in phase 1 extension stations

CTN :43503064

19 Jan, 2026 NA

Bangalore - Karnataka

Tender For construction and fabrication of heaving training obstacle as per specification , construction and fabrication of tarzan swing walk training obstacle as per specification , construction and fabrication of hyper extension training obstacle as per specification , construction and fabrication of steel wall bar training obstacle as per specification , construction and fabrication of sit up bar training obstacle as per specification , construction and fabrication of chin up bar training obstacle as per specification , construction and fabrication of deep push up bar training obstacle as per specification , construction and fabrication of 24 rope gallow training obstacle as per specification , construction and fabrication of horizontal rope training obstacle as per specification

CTN :43521693

30 Jan, 2026 NA

Multi City - Multi State

Tender For supply of mob trolley mounted 4-6 mm carbon steel fabrication fully welded leak proof 5 kl fuel bowser for safe transport, storage and dispensing capacity 5000 ltr under job no 0175 oblique 25-26 , manhole 400-500 mm dia with bolted cover venting sys- flame arresting breather vents pressure- vacuum type filling point - 3 inch or 4 inch anti-splash port with lockable cap , 1 inch ball valve for fuel drain , heavy duty steel chassis of overall length 4.5 meter, width 1.9 meter and height 1.8 mtr payload and gross vehicle mass 7000-10000 kg with landing jack 10000 kgs capacity , dual axle configuration wheels oblique tyre-heavy duty rated tyres e.g. 235 oblique 85r16 incl suspension leaf spring or rubber torsion braking system-pneumatic air break breakaway sys , spare wheel 235 oblique 85r 16 standard , landing oblique parking jack, wheel chocks and holders, reflective tape and hazard marking , pump type diesel oblique petrol compatible positive displacement or centrifugal flow rate 20 - 40l oblique min standard, drive type 12v oblique 24v dc motor petrol engine as per store list attached , antistatic fuel hose of length 8 mtr x 3 oblique 4 inch dia, and nozzle automatic shutoff oblique manual with digital flow meter , emergency stop switch, fire extinguisher 2 x 9 kg dry chemical powder, earthing cable and bonding point, anti-static bonding strap, pressure relief valves. , lighting for trailer, indicators, brake lights and tail lamps , spare tools spanner de open jaw 30 x 32, ring spanner 30 x 32 plier side cutting, tyre lever, screw driver, hammer 200 gm, tester and oil can each one as per store list attached , documentation and certificate. material test cert, pressure and leak test cert, welding procedure and welder qualification records, roadworthy cert records, roadworthy cert as per store list attached ) /bid number : gem/2026/b/7096356 * /dated: 09-01-2026 & & / bid document 1 / 16

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Central Government/Public Sector

CTN :42372427

19 Jan, 2026 NA

Bokaro - Jharkhand

Tender For corrigendum : fabrication, manufacture, inspection, testing and delivery of dry gunniting machine and portable air compressor _pkg. no. sm-405_ on f.o.r. bokaro steel plant site basis required for rebuilding of coke oven battery no. 6 at sail, bokaro steel limited, bokaro, jharkhand.

Central Government And Public Sector

CTN :43401295

29 Jan, 2026 NA

Narora - Uttar Pradesh

Tender For corrigendum : supply of fabrication and supply of carbon steel containers for disposal/storage of exhausted resin of moderat

State Government

CTN :43004977

20 Jan, 2026 1.68 Crore

Kutch - Gujarat

Tender For corrigendum : work of strengthening, fabrication and erection of steel structures of lhp unit 3 including applying anti-corrosive epoxy paint at kltps

CTN :43206566

12 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

CTN :43380819

10 Jan, 2026 NA

Damanjodi - Odisha

Tender For corrigendum : erection of structural steel, galvanised chqd. plates, gratings and handrails of 1800 mt including but not limited to, transportation of fabricated steel structure from br/client store/fabrication yard to erection site, unloading, bolting, assembly,

Suspended Access Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government