Latest suspension bracket Tenders | Government suspension bracket Tenders

Central Government/Public Sector

CTN :44510368

02 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of set of bracket complete |consisting of t [set of bracket complete |consisting of three items as per drg no. 2.10113.0.03.100.017 = 02 nos, le 11279 = 02 nos & 4.10113.0.03.100.164 = 01 no. ( air brake equipment panel suspension bracket ) ]

CTN :44448127

03 Apr, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of zu-23mm gun latch lock pin (23-mm gun 2a14) (ordnance 2a14/2a14m), retracting cable (cradle assy 01/2a13,fig, trigger spring right hand (cradle assy, trigger spring left hand (cradle assy, screw (right hand attachment assy, adjusting washer (carriage assy 02/2a13), spring (carriage assy 02/2a13 fig-10), lever spring (box holder assy 03/2a13,, washer (plateform & wheel bogie assy, gasket (plateform & wheel bogie assy 0, end piece spring (plateform & wheel bogie-assy, 04/2a13 fig-14), crank shaft front cup with spring in assy 55x80-10, (wheel with hub assy 04-12/2a13 fig 15), packng ring (whlboggie change over buffer assy, 05-/2a13 fig-19), gasket(elevation mechanism-assy 06/2a13 fig 20), shaft (turning mechanism), pusher (turning mechanism) 07/2a13 fig 21), lubricator 1.3ts, spring (cartridge boxes assy 09/2a13 fig-22), spring (part of general assy-assy00/2a13), light returner (parts of general assy 00/2a13, fig-, 1), nut m14x1,5.12.40x.06 (platform and wheel bogie, assy 04/2a13 fig-18), bearing, tail light glass (lamp), elastic stop, lubricator, retracting spring, spring (arm yoke rh assy 01-13 & lh assy 01-14, fig-6), pin (box holder assy 03/2a13 fig-12), locking plunger spring (plateform and wheel, bog), washer (plateform and wheel bogie-assy 04/2a13), gasket(wheel boggie change over buffer- 05-2a13, handle base (elevating mechanism assy 06/2a13), thumb piece, link ejector left hand (part of general assy-), right hand link ejector (part of general assy), level gasket(top carriage), spring latch(23-mm gun (2a-14) ), elevating pin 5x40, plug, worm wheel with shaft, lamp holder, plug (two pin), lamp holder, lamp holder, switch, bulb mn 2.5-0.15, tab lock washer (cradle assy 01/2a13), adjusting washer, trunnion (right hand back attachment assy, screw (right hand rear attachment assy 0, screw (right hand rear attachment assy 01-, ring (carriage assy 02/2a13 fig-8), inner ring (top carriage), outer ring (carriage assy 02), gasket (plateform & wheel bogie-assy 04/2a13, cover gasket (plateform & wheel bogie-assy, bearing 7508h (platform and wheel bogie assy, bearing 7306, hook spring, valve spring (wheel bogie change over buffer, spring (cartridge box assy 09/2a13 fig-22), handle spring (part of genral assy-assy 00/2a13, carrier clamp, bearing ring, glass cover proctective, gasket, jacket assembly lh (cradle assy 01/2a13, fig-5), clamp, trigger shaft (cradle assy 01-2a13), latch pin (cradle assy 01/2a13,fig-7), screw (cradle assy 01/2a13), protacting ring (retracting mechanism rh & lh, assy 01-10 &01-11, fig-5), body cover (retracting mechanism rh & lh assy, lock pin (carriage assy 02/2a13 fig-8), clamp spring (carriage assy 02/2a13 fig-8), cradle lock, spring (box holder assy 03/2a13, fig-12), screw (plateform & wheel bogie-assy 04/2a13), washer (plateform and wheel bogie-assy 04/2a13 ), end piece (jack assy assy 04-7/2a13 fig 14), locking ring (wheel with hub assy 04-123/2a13 fig 15), plug (whlboggie change over buffer assy 05-/), transmission lever (elevating mechanism assy 06), pinion shaft (elevation mechanism-assy 06/2a13), lever (turning mechanism 07-2a13 fig 21), latch (cartridge boxes assy 09/2a13 fig-22), spring (cartridge boxes assy 09/2a13 fig-22), washer (part genral assy-assy-00-2a13 fig-2), screw m5x8.66.50.06, lamp filament 12 v, 21w, pin, washer, brake tie rod (carriage assy 02), bushing (carriage assy 02/2a13 fig-8), spring, lock spring, ring (carriage assy 02/2a13 fig -8), outer race (carriage assy 02), wire, inner race (carriage assy 02), trigger spring, lock pin (box holder assy 03/2a13 fig-12), tie rod (platform and wheel bogie assy 04/2a13 fi, outer screw (plateform and wheel bogie-assy 04, nut (wheel bogies change over buffer assy 05/2a13, lock (over size)elevating mechanism assy 06/2a13, gasket (turning mechanism assy 07/2a13, fig 21), cover assy lh, cover right hand (cartridge boxes class `b'), lamp electric filament

Central Government And Public Sector

CTN :44432602

20 Mar, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of rolling stock - scrap stainless steel (irs m44) cut up parts of cond. wagons to be sold without bogie and excluded fittings as per crse/ bsp letter no. mech. /hq/ 003/007 /4016 dt. 12.11.2018 [excluded fittings-coupler body, knuckle, knuckle pin, draft gear, yoke ,bogie end pull rod, brake cylinder complete with piston rod and suspension bracket, yoke pin,ctrb, wheel sets and roller bearing, bogies, icf trolley bvzi, distributor valve.] & front follower of draft gear vide pcme/bsp's letter mech/hq/010/010/warranty dtd. 09.06.2020. remark: 1. wagons may be grounded for clearing of track. 2.wagon component must be cutup before lifting by the purchaser, so that component can not be re-used. 3. boxnr wagons having stainless steel (irs m44) side body, end body & floor are upgraded & rehabilated version of boxn wagons. 4. weight is as per the challan provided by the stock holder and it is for reference only. 5. to be sold on "as is where is basis" 6. cbc components to be handed over sepretarely in placemeal.

Central Government And Public Sector

CTN :44432603

20 Mar, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of rolling stock - mild steel scrap cut up parts of cond. wagons to be sold without bogie and excluded fittings as per crse/ bsp letter no. mech. /hq/ 003/007 /4016 dt. 12.11.2018 [excluded fittings-coupler body, knuckle, knuckle pin, draft gear, yoke ,bogie end pull rod, brake cylinder complete with piston rod and suspension bracket, yoke pin,ctrb, wheel sets and roller bearing, bogies, icf trolley bvzi, distributor valve.] & front follower of draft gear vide pcme/bsp's letter mech/hq/010/010/warranty dtd. 09.06.2020. remark: 1. wagons may be grounded for clearing of track. 2.wagon component must be cutup before lifting by the purchaser, so that component can not be re-used. 3. weight is as per the challan provided by the stock holder and it is for reference only. 4.in bvzc wagon lb springs to be cut marked before delivery to ensure non-recycling of material. 5. to be sold on "as is where is basis" 6. cbc components to be handed over sepretarely in placemeal.

Central Government And Public Sector

CTN :44432604

20 Mar, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of rolling stock - scrap stainless steel (irs m44) cut up parts of cond. wagons to be sold without bogie and excluded fittings as per crse/ bsp letter no. mech. /hq/ 003/007 /4016 dt. 12.11.2018 [excluded fittings-coupler body, knuckle, knuckle pin, draft gear, yoke ,bogie end pull rod, brake cylinder complete with piston rod and suspension bracket, yoke pin,ctrb, wheel sets and roller bearing, bogies, icf trolley bvzi, distributor valve.] & front follower of draft gear vide pcme/bsp's letter mech/hq/010/010/warranty dtd. 09.06.2020. remark: 1. wagons may be grounded for clearing of track. 2.wagon component must be cutup before lifting by the purchaser, so that component can not be re-used. 3. boxnr wagons having stainless steel (irs m44) side body, end body & floor are upgraded & rehabilated version of boxn wagons. 4. weight is as per the challan provided by the stock holder and it is for reference only. 5. to be sold on "as is where is basis" 6. cbc components to be handed over sepretarely in placemeal.

Central Government/Public Sector

CTN :44432744

19 Mar, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot non ferrous scrap - 98200070 scrap various type of brass items consisting of suspension clamp, ending cone, pg clamp, suspension brackets, bracket clamp, swivel clip, contact dropper clip, suspension different types, catenary splice, other miscellaneous ohe brass spares, brass bell, brass parat, pressure gauges, da / oxygen regulators, nozzle, pnm cutting nozzle parts, wearing / bearing piece, dv, pt, bmbs/bmps, b/cylinder condemned parts, lpg regulators, side bearer, muti stage gas regulator, diesel loco parts, oil seal, sleeve oil, bush, heavy shell bearing with attached white metal plate, and other brass items & parts if any with or without attachment of shorts and sizes.

Central Government/Public Sector

CTN :44397922

18 Mar, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of depot non ferrous scrap - 1. released unserviceable copper- cut pieces catenary wire, cut pieces contact wire, jumper wire, cut pieces dropper wire, male female jaw isolator jaw , isolator pipe, isolator plate,bimetallic, catenary dropper clip, copper pipe, copper saddle, binding wire etc. qty. 5713 kg 2. released unserviceable brass- different type pg clamp, ending cones, catenary suspension,bracket clamp,swivel clip, contact clip, catenary ending cone, isolator base, different type ending cones, motarized blower parts qty. 338.48 kg 3.released unserviceable alluminium - cut pieces feeder wire, different type pg clamp, rope ferrule, anti wind clamp piece, study arm, connectors, study arm clamp, atd pulley, tirfor, motorized blower qty. 258.05 kg total weight 6309.83 kg approx sse ss-11 no. sse/trd/bina 2025-26 dt.17.12.2025 note: delivery to be made as per material shown in description according to weight. 1.delivery of lot by actual weighment basis. 2.qty has been assessed on approximately basis subject to any variation during delivery by actual weight. 3.lot to be sold as is where is basis.

Central Government And Public Sector

CTN :44400167

18 Mar, 2026 NA

Bongaigaon - Assam

Tender For supply of spares for 04 nos. primary spring pressing system of fiat bogies for lhb coaches model no: ppsps- 10 ton consisting of eight(08) items as per annexure attached.

CTN :44400539

26 Mar, 2026 NA

Kharagpur - West Bengal

Tender For supply of large catenary suspension bracket complete set etc.

Central Government And Public Sector

CTN :44330209

13 Mar, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot non ferrous scrap - lot of scrap non-ferrous items consisting of brass , bronze bush and bearing, cutting torch,oxygen gas regulator, cutting torch nozle,torch light,suspension clamp,p.g. clamp,suspension bracket and clamp,cananary clamp,brass shell and other brass items of mechanical,ohe, electrical, signal and electric loco items etc with or without broken condition and with or without slight iron and other attachment as availble as in lot.

Suspension Bracket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors