Latest suspension gear Tenders | Government suspension gear Tenders

Central Government / Public Sector

CTN :45061692

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604007 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079639360 ,2) ser boxn m1 10079666168 3) special repair boxn m1 10069661050, 4) ser boxn m1 10079561883,5) nr bcn m1 30039062397. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers, 20.knuckle pin.21.knuckle thrower.22.bcn swing, 23.bcnflap ds8no:0999603007. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.174 (ms) .mt sold by number basis only.05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061694

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604009 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , boxnr ,available on rails. 1) special repair boxn m1 10069660152, 2) special repair bcn m1 30069004213 ,3) ser boxnr 25079661945 ,4) cr bcn m1 30019016389 ,5) er bcn m1 30029024992. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support(1stplate),15.safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bcn swing,23.bcnflaps8no:0999603009. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.677.mt (m.s-48.272, ss-4.405) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066211

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - 03132604005 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ser bvzc 85079560037,2) ecr bvzc 85100429647 , 3) special repair bvzc 85060294668 , 4) special repair bvzc 85070160038 , 5) er bvzc 85029671424 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300, 10. cut of angle cock ,11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603005. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.328 .mt sold by number basis only.05nos , delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066212

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604001 .pl no.98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, bcn m1 , boxn m1 , bobrn m1, boxnr . available on rails. 1) er bcn m1 30029161826. 2) special repair bcn m1 30069062244. 3) ser bcn m1 30079060452 . 4) special repair boxn m1 10069660992 . 5) er bobrn m1 72029660268 . 6) nr boxnr 25039660179 location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.distributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors,14.bcn swing,15. bcn flap 16.yoke pin support (1st plate),17. safety plate with anchor plate(2ndplate18.yoke support plate(3rdplate),19.cock of angle cock.20.yoke pin,21)draft gear followers,22.knuckle pin.23.knuckle thrower.24.bronze buishes ds8no:0999603001. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 72.926 .mt (m.s -68.740, ss-4.186) sold by number basis only.06 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 06 nos.

Central Government / Public Sector

CTN :45066213

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604003 pl no 98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ner bvzc 85040700080 ,2) cr bvzc 85019660605 , 3) scr bvzc 85090160131, 4) special repair bvzc 85069760171 , 5) nfr bvzc 85050300898. location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pinsupport (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603003. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.344.mt sold by number basis only. 05 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066216

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604010 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) er bvzc 85029671103, 2) cr bvzc 85019860043 ,3 special repair bvzc 85069757157 ,4) scr bvzc 85090160070 ,5) wr bvzc 85080460012 . location road no.4 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603010. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.120.mt sold by number basis only. 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

CTN :45042588

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] special repair 85060260069 bvzc [2] cr 85019460052 bvzc [3] cr 85019650217 bvzc [4] special repair 85069660242 bvzc [5] nr 85030160023 bvzc [6] special repair 85069656917 bvzc [7] ser 85079660300 bvzc [8] wr 85080450457 bvzc [9] ser 85079760031 bvzc [10] nr 85039600360 bvzc [11] wr 85080160233 bvzc [12] ecr 85100360018 bvzc. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (113.460 mt) is the lot quantity (113.460 mt ) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighatarea beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

Central Government/Public Sector

CTN :45031649

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)sr bcnm1 30069032384 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, 4.side bearer top plate, 2)sr bcnm1 30069060424 - rc items:- 1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, 3.side bearer top plate, 3)se boxnr 25079770289 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 4)sc boxnm1 10099563133 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 5)wr boxnm1 10089761198 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, 4.side bearer top plate, 6)se boxnrhs 25079660443 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 7)se boxnm1 10079663136 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 4.yoke pin, 4.side bearer top plate = 7 wagons. ds8 no:023310-25-24099 dt: 27.02.2026. location: jtj yard. custodian: sse - c and w - jtj. remarks: wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside except for sl no 2) special repair bcnm1 30069060424. pl.no. 98110159. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Suspension Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector