Latest sw pipe Tenders | Government sw pipe Tenders

State Government

CTN :40544871

06 Jun, 2025 8.01 Lacs

Hyderabad - Telangana

Tender For laying of 300mm dia swg pipeline for providing sewarage connection to vaishnavi estates under moosapet section , sd ii, operation and maintenance dn. ix vide file no. 2024-11-1992.(reserved for waddera/sagara (uppara) as per g.o ms no.59, dated:21.05.2018)

corporations/Associations/Others

CTN :40523671

04 Jun, 2025 10.48 Lacs

Multi City - Andhra Pradesh

Tender For removing & laying of swg pipe line 200mm dia and laying of new cc road from d.no.41-29/6-47 to 47-29/9-44 in shaik vali ahamad road ranigarithota 17th division works division-iii. 2nd call general funds

Corporations And Associations And Others

CTN :40543782

05 Jun, 2025 1.68 Lacs

Panchkula - Haryana

Tender For providing and laying of sw pipe line near shopping centre and near sun city sector 20 panchkula

CTN :40521529

09 Jun, 2025 NA

Kolkata - West Bengal

Tender For supply of hand pump , unloading manifold , pump coupling , service kit , wire rope assembly , set of hydraulic hoses , service kit for luffing cylinder , service kit for telescopic cylinder1 , service kit for telescopic cylinder2 , oil temperature sensor , ptfe tape roll teflon , dowty washer , slew limit switch , hoist limit switch , pipe clamp , o ring for hydraulic reservoir , misc hydraulic fittings and connector , joysticks , ab plc micro logix paramtr and calibratn , dcv controller program andcommunication , 415vac220vac 750va transformer , 2 pole ac mcb , selector switch , push button stop , green indication 24v dc , red indication led 230v ac , yellow inducation red 230v ac , blue indication led 230v ac , 3 pol 65a contactor , red indication 24v dc , 1 pole mcb ac , 200w, panel space heater , oil tank level switch , cable reel

CTN :40423805

05 Jun, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter

CTN :40540973

20 Jun, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of brass filler rod 1mm , bronze flux , copper filler rod 2mm , copper pipe half inch dia , ms copper coated filler rod , alluminium flux , refilling of oxygen gas cyl 7cb , refilling of acetylene gas cyl 3cb , calcium carbide , cutting wheel 14 inch , cutting wheel 4 inch , grinding wheel 4 inch , welding electrod e6013 , armr welding electrod 308l , angle iron 1x1 inch 3mm , round bar 12mm ms , round pipe 3inch 2mm ms , flat patti 1inch 3mm ms , ms square pipe 2mm, 1 point 5 inch , ms plate, 4x8ft, 6mm , ms sheet 22 gauge 4x8 ft , ms sheet 24 gauge 4x8 ft , tig welding torch zozzle kit , tungsten electrode lanthnide , tungsten electrode red thoriated , alluminium tig welding filler rod 4043 , coal , alluminium , molding sand , zinc sheet 1mm , drill bits, 2mm to13mm, hss , solder soft , pop rivets 1 point 5 inch ms , snap rivets point 5 inch ms

CTN :40521907

19 Jun, 2025 50.0 Thousand

Udhampur - Jammu And Kashmir

Tender For supply of extension pulley , ignition switch , pipe exhaust spl flexible fitted between , axle nut bolt , axle pin , belt v a57 , hub bearing , hub oil seal , pipe high pressure with end

CTN :40252519

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - std self lock nut m10 , o ring , screw(r2) , gasket( plate no- c1-16-1 , sl no-3) , o ring 15.2idx5.30 cross dia , bypass seal (ispl sl no -1206) , gasket for exhaust manifold(plate-4h1176) , bush (item no-309) , bolt m10x80(plate-iii g-3) , hose clip(ms sl-193) , back nut , reflector reflex white(plate iv r-13) , spring extension (plate xxv a) , dowty seal , bolt(ispl sl-502) , buffer , mounting rear road light l s(plate viii h) , bolt m10x50 (plate xxxi p) , mounting rear road light r s(plate viii h) , lock washer (plate xxxi r) , spacer(item no-562) , bolt , strap , lock cover door lh (plate iv n) , relay charge over , cable inner(plate xi-b3) , dump switch(plate-x h-2) , radiator top hose(plate-xxviii b-14) , half clamp(ispl plate-d04) , hinge door (item no-305) , working light switch front , joint , tail lamp right side(item no-907) , glass right side quarter light(sl-378) , glass left side quarter light , seal window left hand side (plate iv p) , ignition switch , pipe fuel , door seal left hand (item no-323) , door tinted glass lower , door tinted glass lower(sl no-322) , hose (plate-xiii n-1) , mounting resilient (item no-114) , hose st pump (item no-1212) , latch assy inner rh(item no-341) , glass tinted right (plate-iv r) , door tinned glass upper(item no-321) , door tinned glass upper(item no- 338) , window tinted glass left hand side(super plate pla , hose 5 by 8 feet bsp (plate-xiii t) , rear window tinted glass (jcb super page-107) , canvas cover(ispl sl-561) , window frame left hand slide (item no-354) , door painted & sealed left hand(item no-320) , link tipping (item no-747) , windscreen front (jcb 3dx super) , liner roof assy (plate iv f) , oil pan assy twin skin (p-801) , valve main relief 227 bar (plate-xv-b) , door right side(item no-337) , valve 3rd section (plate-xv-b) , valve 1st section (plate-xv-b) , operator seat(p-109) , valve inlet (plate-xv-b) , cooler trans hydraulic oil (plate-xxviii b) , bucket 400mm (plate xxxi e) , evb super manual hydro control(11 items) , cylinder dipper (sl no-404) , bucket excavator 0.26 (plate ii-1) , plug(plate-xxxi aa-27) , cap(plate-xxxi aa-28) , valve c w adapter(plate-xxxi aa-24) , coupling(plate-xxxi aa-26) , frame outer rear window(jcb super p-105) , nut gr 1.3 by 4 inch unf (price list) , oil filter transmission(ispl sl-1504) , transfer filter , super filter drain , internal puller , ring scaling (jcb ms sl no 580) , grab sleeve , grab sleev , grab sleeve , grab sleeve , grille front(plate-iii q-1) , thrurst ring , back up tool , assembly jig , belt wrench , lift arm(plate- v a-7) , bucket tapered(plate-xxxi v-1) , washer large , bulb instrument , washer (jcb super plate xxxix c) , clip , nut(b4-4-1) , nut lock 3 by 8 unf (plate i) , screw hex 3 by 8 inch (plate-xxib) , fuse 3 amp(jcb super ix e-10) , strap check (plate iv n) , screw hex head , bolt(a1-7-4) , nut (plate xx e) , whasier 13.2 by 13.0id x 41.2 by 41.0od x 2.9 thk , 7.5 amp fuse (plate ix e) , bolt 3 by 8 unf x 3 (jcb super page xxxix sl no-245) , bolt gr-5 , 1 by 2 inch unf x 3 by 4 inch long , nut , sterring nut , set screw m10x30(plate iv v) , banjo bolt with strainer , clamp , back nut(e1-8-11 by 3) , washer hardened m10 (plate iv v) , plate clamp(e1-4-1 by 5) , nipple , bolt m10x70(plate xiii r) , bolt m 12x100mm , o-ring , clamp mid (plate xxxi g) , link 1.25 ton (plate xxxi y) , clamp , lock cover lh , shim , cap , pedal pad , nut 1-1 by 2 inch unf x 27.5 thk , knob with switch (plate xg) , o ring , switch pannel hazared , screw driver 150mm , mounting cab lower red b-post(plate-iv) , socket 3 by 4 inch a oblique f(plate-vii d-30) , micro relay change over 12v , fuel pipe (feed pump to filter) , fuel tank cap (plate iii c) , stud pre cleaner (plate-xxvi b) , joint , liner to head , 0.8mm thk , lock nut , washer , adopter 90 deg elbow (plate-xiii y-3) , stainer fuel filter (plate iii c) , mounting cab upper green b-post(plate-iv-b) , pivot pin , fuel pipe , s

CTN :40533692

04 Jun, 2025 1.66 Lacs

Faridabad - Haryana

Tender For rough cost estimate for providing and laying of 200mm dia. s.w. pipe sewer line in gali no. 1 and linking with gali no.2 in adarsh nagar - hari vihar, newly approved colony in ballabgarh ward no.40.

CTN :40459347

31 May, 2025 31.55 Lacs

Faridabad - Haryana

Tender For corrigendum : providing and laying 250mm dia s.w. pipe sewer line in village bhankri, ward no.16, faridabad.

Sw Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Corporations And Associations And Others