Latest swing Tenders | Government swing Tenders

CTN :43522337

24 Jan, 2026 NA

Dhar - Madhya Pradesh

Tender For supply of garden swings (q3) , swing (preschool kit) (q3) , seesaw for playground (v2) (q3) , outdoor slide (v2) (q4) , shoulder builder / arm wheel - outdoor gym equipment (q3)

Central Government/Public Sector

CTN :43033243

12 Jan, 2026 NA

Korba - Chhattisgarh

Tender For corrigendum : procurement of beml make backhoe front loader excavator spares - hose,chh04-00809,beml,loader,bl-9h, sight gauge,762hs03279,beml,bd355, bearing needle,cbn0102016,beml,dozer, pressure gauge,125ip81149,beml,dozer, seal kit,374hc00108,beml,loader, seal kit,374hc00149,beml,loader, hose,05z1260156,beml,loader,bl-9h, washer,474ax12501,beml,loader,bl-9h, thrust washer,474ax22084,beml,loader, shut off cable,474ce02061,beml,loader, coolant temp sensor,474eg02168,beml, rear lamp assy,474eg02216,beml,loader, head lamp assy,474eg02224,beml,loader, swing cylinder,474hc01474,beml, water temp gauge,474ip02078,beml,loader, hour meter,474ip02094,beml,loader,bl-9h, voltmeter,474ip02118,beml,loader,bl-9h, pin assy,474md02247,bl-9h, hose,474ph03665,beml,loader,bl-9h, hose,474ph06176,beml,loader,bl-9h, hose,474ph06184,beml,loader,bl-9h, push pull cable,474zz11175,beml,loader, press sensor switch,757eg91136,beml, hose,chh05-20607,beml,loader,bl-9h, hose assy,376ph02125,beml,loader,bl200-1, pin,375ll02041,beml,loader,bl200-1, pin,375ll02058,beml,loader,bl200-1, pin,375mf02165,beml,loader,bl200-1, radr&tc cler assy,376ec02002,beml, relay battery,375eg02372,beml,loader, retainer,375mf11197,beml,bl-200-1, shaft,375mf02043,beml,loader,bl200-1, speedo meter,376ip91076,beml, hose,374ph02234,beml,bl-9h, battery relay,474eg02354,beml,bl-9h, pin,474md02182,beml,bl-9h, pin,474md02271,beml,bl-9h, pin,474md02239,beml,bl-9h, pin,474md02222,beml,bl-9h, pin,474md02214,beml,bl-9h, pin,474md02174,beml,loader,bl-9h, pin,474md02199,beml,loader,bl-9h, pin,474md02166,beml,loader,bl-9h, hose,chh2201205,beml,bl-9h, gasket,374tk61089,beml,bl-9h, hose,chh0400813,beml,bl-9h, temperature gauge,155ip81084,beml,be-220, key switch,cek0120000,beml,excavator, lamp assy,cel1112412,beml,loader,bl200-1, pressure sensor,757eg91136,beml,be75

CTN :43523902

16 Jan, 2026 60.0 Thousand

Hoshangabad - Madhya Pradesh

Tender For shri shri 1008 shtan karoridas ji ki smrati me basant panchmi mela mahotsav 2026, jhula (large and small), including palanquin swing, boat, back dancer, etc., for children seesaw and other play and sports equipment at nagar parishad bankhedi distri

corporations/Associations/Others

CTN :43480599

14 Jan, 2026 3.02 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym and pcc benches in parks near house no.2870/2 sector 49-d,chandigarh under mplads. work no.114 18th ls. - push chair odf 001functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mm material: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting lifeprovision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, surf board by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, streel footrest/foot paddle for long lasting life.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, space walker .space walker complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is not less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no less than 3.0 mm.13 the diameter of rotating shaft is not less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. approaches: hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730

Central Government And Public Sector

CTN :43494461

12 Jan, 2026 NA

Pune - Maharashtra

Tender For procurement of products microscope frame with necessary spares, sextuple revolving nosepiece with slot or dic (u:d6re), transmitted arm for bx53f frame including scres, 14w high power led source, swing out condenser

CTN :43475418

15 Jan, 2026 4.50 Lacs

Bundi - Rajasthan

Tender For supply and fixing work of open gym item in ward no 2 lakheri - part " a " :- building work ;, air swing: providing, designing and fixing of air swing in pair of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately)., horse rider station: providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. base plate cover and seat to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movement. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate cover and fixing of equipments etc (the cement concrete and excavation work shall be paid separately)., stair stepper: providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv re

corporations/Associations/Others

CTN :43511782

29 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 600 nb ss 316 swing check non return valve flanged ends with counter weight system for sea water booster pump 5a discharge line of unit v acw system

corporations/Associations/Others

CTN :43461971

13 Jan, 2026 3.03 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in garden of annual part i of sector 44 chandigarh under wdf - providing & fixing of push chair functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting life. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life.the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing and fixing of space walker .space walker complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is no.t more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no. less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is no.t less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no. less than 3.0 mm.13 the diameter of rotating shaft is no.t less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge, providing and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high en

Corporations / Associations / Others

CTN :41829855

12 Jan, 2026 NA

East Nimar - Madhya Pradesh

Tender For bid to ras supply of gear operated ball valve size40 nb , gearoperated ballvalve size65 nb , gear operated ball valve size80 nb , gear operated ball valve size100 nb , ball valve 15 mm lever operated , ball valve 20 mm lever operated , gate valve 15 mm class 1 , gate valve 20 mm , gate valve 25nb class 1medium , gate valve 40nb class 1medium , gate valve 50nb , gate valve 80nb , gate valve 100nb , gate valve 200nb , globe valve 1 divided by4 inch , globe valve 40nb rising stem class 1 , nrv 20 mm3divided by 4 inch , nrv swing check valve 150 mm , nrv swing check valve 200 mm , butterfly valve 80 mm medium , butterfly valve 350 mm medium ) /bid number : gem/2025/b/6626926 * /dated: 12-09-2025 & & / bid document 1 / 22

CTN :43378553

16 Jan, 2026 3.50 Crore

Mumbai - Maharashtra

Tender For corrigendum : supply of procurement of b and d spares of line valves for p17a ships : - butterfly valve triple offset nab 100 , ball valve nab 65 nb pn 10 flanged , ball valve nab 40 nb pn 10 flanged , ball valve gm 80 nb pn 10 flanged , nr swing check valve nab 200 nb pn 10 fl , nr swing check valve nab 40 nb pn 10 fla , nr swing check valve nab 25 nb pn 10 fla , nr swing check valve gm 40 nb pn 10 flan , nr swing check valve gm 25 nb pn 10 scr , sdnr valve nab 100 nb pn 10 flanged , sdnr valve nab 80 nb pn 10 flanged , sdsl valve nab 65 nb pn 10 flanged , sdsl valve gm 10 nb pn 10 screwed , gate valve nab 250 nb pn 10 flanged , gate valve nab 200 nb pn 10 flanged , l ported plug valve nab 100 nb pn 10 , l ported plug valve nab 50 nb pn 10 , nr swing check valve gm 25 nb pn 10 , nr swing check valve gm 32 nb pn 10 , sdnr valve gm 50 nb pn 10 flanged , sdnr valve gm 40 nb pn 10 flanged , sdnr valve nab 40 nb pn 10 flanged

Swing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

Corporations / Associations / Others