Get complete information related to latest Tap Pipe Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Tap Pipe Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Tap Pipe Tenders.
Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa
Tender For supply of waste water laying s.s. seamless pipe along with supporting bracket & accessories drg. no. mi006005 alt. 'c' item no. 2, 3, 4, 5, 6, 7, 8. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of material to gwm work at in ramathanl gp - add sundries charges at 1 percentage on material 1136284, broken stone aggregate 20 mm size 1136284, broken stone aggregate 12 mm to 10 mm size 1136284, coarse sand zone iii 1136284, portland cement 1136284, mixer concrete 1 cum capacity 1136284, add watering charges at 1 percentage on material 1136284, plasticizer or super plasticizer 1136284, hom of vibrator 0.71 days 1136284, tmt bars fe 500 1136284, binding wire 1136284, jungle wood runners and planks 1136284, silver oak or equivalent planks 38 mm thick 1136284, casurina poles 100 150 mm 1136284, add sundries charges at 2 percentage on material 1136284, add handling loading and unloading at 2percentage on material 1136284, m.s rods 1136284, ms flat 1136284, fitter class i 1136284, welder grade i 1136284, add hom of welding and grinding machine at 4percentage on material 1136284, add handling loading and unloading at 1percentage on material 1136284, ready mix primer paint ready mix red lead paint 1136284, add wire brush fine steel wool putty sand paper at 3percentage on cost of paint 1136284, painter class i 1136284, add providing and removing scaffolding at 3percentage on labour 1136284, enamel metal paint 1136284, add brush at 1percentage on cost of paint 1136284, pvc pipe of 6kgpercum90 mm 1136284, burnt bricks class 35 non modular 1136284, mixer concrete small used in culvert 1136284, filter media stone aggregates 1136284, laboratory asst. sslc passed or mate or supervisor 1136284, stone aggregatesingle size 40 mm nominal size 1136284, stone aggregatesingle size 20 mm nominal size 1136284, hydraulic excavator 0.9 cum bucket capacity at 60 cum per hr 1136284, tipper 5.5 cum with 10 tonne capacity 1136284, loading of earth as per item 1.1 ii 1136284, unloading of earth as per item 1.1 iv 1136284, dozer d50 for spreading at 200 cum per hr 1136284, motor grader at 50 cum per hr 1136284, water tanker 6 kl capacity 1136284, three wheel 80100 kn static roller 1136284, water 1136284, compensation for earth taken from private land 1136284, tractor 40 hp 1136284, plastic emulsion paint 1136284, add brush putty sand paper roller at 5percentage on cost of paint 1136284
Tender For supply of set of items for pipe laying for waste water for lhb type coaches fitted with bio tank as per rcf drg. no.-mi006005, alt-a or latest, item no-1 to 10. material specification and quantity are as per draw ing. [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of items for pipe laying for waste water for lhb type coaches fitted with bio tank. 1. pipe dia 42 (od) x 2 x 1098 conforming to din specification no. din2391c, x5crni1810 and to rcf drawing no. mi006005, item-2, alt-c,, qty.-1no./set. 2. pi pe clip 43 conforming to specification no. is:6911-92, grde-304 si and to rcf drawing no. lw63110, item-12, alt-nil, qty.-4no./set. 3. stainless steel hex head bolt m8 x 40 (a2-70) confirming to is:1364-92, pt.-1, is:1367-84, pt.-14 and to rcf drawing no. mi0060 05, item-4, alt-c,, qty.-14no./set. 4. stainless steel machine washer a8.4 (a2-70) confirming to is:2016-1967, din125, is:1367-84, p t.-14 and to rcf drawing no. mi006005, item-4, alt-c,, qty.-14no./set. 5. stainless steel nyloc nut am8 (a2-70) confirming to is:700 2-1991, din982, is:1367-84, pt.-14 and to rcf drawing no. mi006005, item-4, alt-c, qty.-14no./set. 6. support block confirming to is: 7002-1991, din982, is:1367-84, pt.-14 and to rcf drawing no. 4 10113 0 30 095 093, alt-nil, qty.-4no./set. 7. support bracket comple te confirming din59382(sew400 x2cr11 1.4003) and to rcf drawing no. le63243, alt- nil, qty.-2no./set. [ warranty period: 30 mont hs after the date of delivery ]
Tender For supply of pipe dia 42 (od) x 2 in length of 6000mm (for pipe laying for waste water for lhb type coaches fitted with bio tank) conforming to din specification no. din2391c, x5crni1810 a nd to rcf drawing no. mi006005, item-1, alt-a, anx.-2 ]
Tender For supply of waste water laying s s seamless pipe along with supporting bracket and accessories, drg. n o.mi006005 alt.-c, item no. 1, 3, 4, 5, 6, 7, 8. (material used in lhb coaches for drain wastewater from lava tory.) [ warranty period: 30 months after the date of delivery ]
Tender For supply of waste water laying s.s seamless pipe along with supporting bracket & accessories drg no. m i006005 alt 'c' item no. 2,3,4,5,6,7, 8 (material used in lhb coaches for drain wastewater from lavatory.) [ warranty period: 30 months after the date of delivery ]
Tender For un usefull item (kabad) - syntex water tank, iron bed, injection trolley, wheel chair, iron chair, r o water, fan, iron cooler, plastic cooler, dustbin, plastic drum, iron drum, godrej almirah, drum steel, wooden bench, iron bench, iv stand, chair, wooden almirah, three seating chair steel, three seating chair iron, mattress, iron pipe tubewell, iron folding chair big size, three fold screen curtain, wooden window, stretcher, bed side locker, oxygen cylinder 22 cft
Tender For pressure parts valves and its spares - sc110461026 - stem do start-v379 for nb300-c2500splgv-bw-mo-217 c12a-ms line main isolation gate valve tagms0107 , sc110461268 - disc wedge-v491 for nb300- c2500spl-gv-bw-mo-217 c12a-ms line main isolation gate valve tag- ms0107 , sc110461027 - support ring v377 for nb300-c2500spl-gv-bw-mo-217 c12a -ms line main isolation gate valve tag no ms0107 , sc110461028 - split ring -v377 for nb300-c2500spl-gv-bw-mo-217 c12a-ms line main isolation gate valve tag no ms0107 , sc110461029 - gasket grafoil -v377 for nb300- c2500spl-gv-bw-mo-217 c12a-ms line main isolation gate valve,tag -ms0107 , sc110410906 - packing ring grafoil w006 for nb300-c2500spl-gv-bw-mo-217 c12a -ms line main isolation gate valve,tag -ms0107 , sc110471624 - packing bull ring -0080 for nb300-c2500spl-gv-bw-mo-217 c12a -ms line main isolation gate valve,tag -ms0107 , co110080535 - bolts bolt-m24x90 -b7-0006 astm a193 b7 for actuator connecting to valve- nb300-c2500spl-gvbw-mo-217 c12a, item no 48 as per the drawing no f830dmbpsmb3 of ms stop valve, tag -ms0107 , sc110461033 - bolt-m24x90 -b16-v180-yoke to valve body for nb300-c2500spl-gv-bw-mo-217 c12a- ms line main isolation gate valve,tag -ms0107 , co110150199 - mcn washer-m24 -is2016 for bolts of yoke to valve body for nb300-c2500spl-gv-bw-mo-217 c12a -ms line main isolation gate valve,tag -ms0107 , co110140097 - studs m24x185 -b16-v380 for valve gland tighting for nb300- c2500spl-gv-bw-mo-217 c12a-ms line main isolation gate valve,tag -ms0107 , co110100064 - nut m24 -gr7 for valve gland tighting for nb300-c2500spl-gv-bw-mo-217 c12a ms line main isolation gate valve,tag -ms0107 , co110150200 - washer -m24 -is2016for valve gland tighting for nb300-c2500spl-gv-bw-mo-217 c12a-ms line main isolation gate valve,tag -ms0107 , co110140099 - studs m22x210mm for bonnet clamp to bonnet for nb300- c2500spl-gv-bw-mo-217 c12a-ms line main isolation gate valve,tag -ms0107 , co110140098 - studs m22x260mm for bonnet clamp to bonnet for nb300-c2500spl-gv-bwmo-217 c12a-ms line main isolation gate valve,tag - ms0107 , co110100063 - nut -m22x2 5 -gr7-0016-h22 for bonnet clamp to bonnet for nb300-c2500spl-gv-bw-mo217 c12a -ms line main isolation gate valve,tag -ms0107 , co110150201 - washer v329 for bonnet clamp to bonnet for nb300-c2500spl-gv-bw-mo-217 c12a-ms line main isolation gate valve, tag -ms0107 , sc110461036 - gland follower for nb300-c2500spl-gv- bw-mo-217 c12a-ms line main isolation gate valve, tag -ms0107 , sc110461037 - disc wedge-v329 for 250mm-c2500-gv-bw-mo-216 wcbeco feed water main iso gate valve, tag-fw004 , sc110461038 - stem for 250mm-c2500-gv-bw-mo-216 wcb-eco feed water main iso gate valve , tag-fw004 , co110080531 - bolt m20x60 -b7-0005, astm a193 b7, for actuator connecting to valve-250mm-c2500-gv-bw-mo-216 wcb, item no 48 as per drg no v825ambpsmb2 - eco feed water pipe main iso gv, tag-fw004 , co110150204 - spring washer b20-is3063 for actuator connecting to valve250mm-c2500-gv-bw-mo-216 wcb, item no 48 as per drg no v825ambpsmb2 - eco feed water pipe main iso gv, tagfw004 , co110140104 - stud m22x180 -b7-v345-dgpt for bonnet clamp to bonnet for 250mm-c2500-gv-bw-mo-216 wcb -eco feed water main iso gate valve , tag-fw004 , co110140103 - stud m22x210 -b7-v377-dgpt for bonnet clamp to bonnet for 250mm-c2500-gv-bw-mo-216 wcb , co110100068 - nut m22 -2h-0017-h22 for bonnet clamp to bonnet for 250mm-c2500-gv-bw-mo-216 wcb,, tagfw004 , co110150203 - washer-v329 for bonnet clamp to bonnet for 250mm-c2500-gv-bw-mo-216 wcb,, tagfw004 , sc110461042 - bolt-m22x70 -b7-v145 yoke to valve body for 250mm- c2500-gv-bw-mo-216 wcb, tagfw004 , co110140105 - stud- m20x150 -b7-v145 for valve gland tighting for 250mm-c2500-gv-bw-mo- 216 wcb-eco feed water main iso gate valve , tag-fw004 , co110100069 - nut - m20 -2h for valve gland tighting for 250mm-c2500-gv-bw-mo- 216 wcb-eco feed water main iso gate valve, tag-fw004 , co110150203 - washer-m20 -is2016 for valve gland tighting for 250mm-c