Latest teflon packing Tenders | Government teflon packing Tenders

Central Government/Public Sector

CTN :45056657

02 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of under frame arrgt for emu c to drg no.(573)icf/mrvc/c/bt-1-1-001, alt 'k' col 2. firm shall fulfil the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : the underframe should be supplied as normal side up and side bearer side down. packing condition as per drg no. icf/j&t/misc-2487, alt 'b' stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

CTN :44194402

05 May, 2026 NA

Hyderabad - Telangana

Tender For bid to ras supply of stationery items d d -executive box files , dak file , pvc clip file a4 size , executive pad-slip pad with 70 gsm, pack of 5 pads , cd marker pen , blue color desk type ball point pen , black color desk type ball point pen , ball pen - red point , metallic scale 30 cm , sharpener , highlighter , gem clips - paper clips - 28mm , pencil hb , stapler machine no. 10 , stapler pin, size no. 10by4-1m with 7. 1mm width , stapler pins no. 24 , correction pen , double tape , single hole punch , double hole punch , post it pad 3 inch x 5 inch , post it pad 3 inch x 3 inch , self adhesive flags 1 inch x 3 inch multi colour , 500 pages register , 300 page register , 200 pages single rule register , 100 pages single rule register , sheet protector , lamination sheet , lamination pouch 70 mm x 100 mm , packing tape size 24mm width , battery 1. 5v aa type , aaa 1. 5v battery , 9v battery , binder clip 25mm , binder clip 51mm , stamp pad , ink for stamp pad, voilet color,60ml , push pins for notice board , plastic tokens , white envelop without window 105mm x 230 mm , white envelop without window a4 , twine thread size 2mm thick,50mtr length , photography paper glossy 175 gsm , kraft paper for wrapping 100 gsm brown colour , clear transparent sheet , plastic single tier tray - solid, rectangular size 40cm x 30cm x 9cm with 3mm thick , plastic single tier tray - mesh, rectangular size 30cm x 25cm x 6cm with 1mm thick , tape dispenser big , paper weight , pen stand , paper cutter knife , paper shredder , paper poker , file folder normal , pens blue , pens black , adhesive , glue stick 15gm , transparent tape 1 inch , transparent tape 2 inch , instant adhesive 20gm , scissor

CTN :45029994

20 May, 2026 7.00 Lacs

Multi City - Telangana

Tender For procurement of general spares for rgoc2 - cotton graphite packing 12mm, cotton graphite packing 16mm, cotton graphite packing 20mm, cotton graphite packing 22mm, gasket sheet 0.50mm thick, gasket sheet 0.75mm thick, gasket sheet 1mm thick, gasket sheet 1.50mm thick, metalic hpg gasket sheet, asbestos fibre jointing sheet 1.50mm, asbestos jointing sheet 3.00m, non metallic gasket sheet 2 mm, 2mm permanite oil joint, nylon rope 25mm, nylon rope 16mm, non metalic jointing sheet, anabond 610 100g, araldite, brass ball valve 12mm, brass ball valve 20mm, brass ball valve 25mm.

Central Government/Public Sector

CTN :45049226

04 May, 2026 NA

Kapurthala - Punjab

Tender For supply of set of seat and berth for lhb slr hog coaches (31-seater), it shall be complying to hl-3 follow cushioning material either pufoam to rdso spec. rdso/2007/cg-04 rev. 01 or silicon foam to rdso/2013/cg-13 rev. 01 and upholstery to spec. rdso/2008/cg-07rev.01 without fire barrier. follow colour shade alnac-03 for upholstery and ral-9006for painting of visible metallic portion., as per drawing: mplsbhoglslrd version 9, packing instruction no.pi117 ver 10. [ warranty period: 54 months after the date of delivery ]

Central Government/Public Sector

CTN :44514086

02 May, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras supply of paint brush half inch 13 mm , twine sewing medium flax , paint brush 3 inch , funnel 5 inch , polythene bag 14x18x75 micron , tape measuring steel 15 meters in metallic case , gash bag 24x30x75 micron , bucket plastic 20 ltrs capacity , bucket plastic 15 ltrs capacity , soap hard yellow , polythene bag 14x20x75 micron , brush scrubbing large hard brush , paint brush 1 inch , twine flax sewing fine , pad lock 40 mm brass , pad lock 7 levers brass navtal , heat resistant gloves for galley , rubber latex long gloves , safety gloves , tape sounding dip heavy weight 15 mtr length , bag biodegradable medium 14 inch x 18 inch , bag biodegradable small 14 inch x16 inch , bag biodegradable big 14 inch x 20 inch , gloves leather a , brush scrubling large hard brush , paint brush half inch 13mm , brush steel wire , twine sewing fine 100 grams roll , measuring tape 15 mtr , stretch packing polythene sheet on handle core 50cm width 20 mtrs roll , heat resistance gloves for galley ) /bid number : gem/2026/b/7308837 * /dated: 17-03-2026 & & / bid document 1 / 29

corporations/Associations/Others

CTN :45011196

18 May, 2026 7.03 Lacs

Multi City - Multi State

Tender For supply of jointing compressed asbestos fiber jointing sheets for steam metalic , jointing compressed asbestos fiber jointing sheets for steam non metalic , jointing compressed asbestos fiber jointing sheets for high pressure steam metalic , jointing compressed asbestos fiber jointing sheets for high pressure steam non metalic , red gray graphited metalic , red gray graphited non metalic , non metalic ,for oil metalic , non metalic , for superheated high pressure steam non metalic , for superheated high pressure steam for oil metalic , for superheated high pressure steam for oil non metalic , for acid non metalic , in all jointings except the acid metalic and non metalic , packing white asbestos yarn non metalic 1.6 to 6.0 mm 0.5 kg spools, 1.6 to 6.0 mm 1 kg spools , asbestos graphited yarn 0.5 kg spool, 1 kg spool , white dry asbestos plated packing , asbestos graphited and lubricated packing non metallic , self lubricating asbestos packing , self lubricating asbestos plated packing non metallic graphited , ptfe asbestos plated packing, teflon

Central Government/Public Sector

CTN :45019349

05 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/26-27/01 date: 01-04-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.

Central Government/Public Sector

CTN :45011194

15 May, 2026 4.99 Lacs

Multi City - Multi State

Tender For supply of emery paper cloth 150 , emery paper cloth 180 , emery paper cloth 320 , emery paper cloth 600 , teflon tape , multipurpose penetrating lubricant spray 400 ml , industrial grade silicon sealant 25gm , non asbestos gasket sheet non metallic 075mm , o ring kit inch , o ring kit mm , square o ring kit inch , square o ring kit mm , sledge hammer 2 lbs , vernier caliper , thread gauge combined , mechanical bearing puller 6 , mechanical bearing puller 8 , mechanical bearing puller 10 , pneumatic impact wrench , cordless impact wrench , cordless portable hand drill , hydraulic cylinder for puller 50t , electrode 7018 315mm , nozzle tip cleaner , gas cutting torch , cutting nozzle 116 , cutting nozzle 18 , flash back arrestor for oxygen gas torch side , flash back arrestor for acetylene gas torch side , flash back arrestor typecg91oxygrh , flash back arrestor typecg91fuellr , oxygen regulator , acetylene regulator , ball peen hammer 3lbs , ball peen hammer 5lbs , sledge hammer 5 lbs , sledge hammer 10 lbs , gland packing graphite 6mm , white dry asbestos gland packing 8 mm , asbestos graphite gland packing 10mm , 12mm graphite gland rope square cross , gland packing 14mm ptfe , asbestos graphite gland packing 16mm , gland packing extractor , safety torch , cutting wheel 4 , grinding wheel 100x4x16 , grinding wheel 355x28x254mm , chipping hammer , gas welding googles , cable cutter , band saw blade , bolt with nut high tensile set ofm6m8m10m6x2550m8x3050m10x3050 , bolt with nut high tensile set of m12m14m12x406075100m14x5075 , bolt with nut high tensile set of m16m18m16x5075100m18x75100 , plasma nozzle , tin cutter , 3 jaw self centering 300mm chuck , combination plier 6 , water pump plier 10 , safety goggles ) /bid number : gem/2026/b/7473926 * /dated: 27-04-2026 & & / bid document 1 / 51

Central Government/Public Sector

CTN :45011707

25 May, 2026 NA

Kapurthala - Punjab

Tender For set of carline assly for 3 phase memu tc coach, as per drawing: mpmemut3claversion 4, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to befabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set ofcarline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnablepacking cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44998364

15 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of underframe complete for lwlrrm amrit bharat coaches to drg. no.lp11103,alt d, anx 9 without item 30 to drg. no.1.11012.0.03.095.001 with additional brackets to drg no 53811115, alt 'a'. the manufacturing facility as per icf/md/spec-147, issue status-01, rev-02 with amendment no.'02'. special condition : the underframe should be supplied as normal side up and side bearer side down. packing condition as per drg no. icf/j&t/misc-2487, alt 'b'. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion.[safety item ]

Teflon Packing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors