Tender For bid to ras supply of cctv camera accessories - 4 mp ip camera dome , 4 mp ip outdoor bullet , 5 mp ir bullet network camera - 60mtr. , 4mp solar powered camera , 64 ch nvr , 8 tb hard disk , 24 port poe switch , cat 6 cable in mtr , 15 u rack with all accessories , 2kva online ups with 6 battery , hdmi cable 4k support 3 mtr , 3 core 1.5 sq mm electric cable , led display 55 inch , installation charges of camera and laying of cat6 cables in conduit pipe and electrical cable along with accessories require and 1 year service support at on-site
Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o
Tender For corrigendum : works contract for removal/laying of ht/lt cables of different size of cables at gandhinagar tps on as and when required basis
Tender For bid to ras supply and etc of visual monitoring system for pgcil siakr ii project - supply- visual monitoring system or cctv - ptz camera with ip 66 housing , supply- visual monitoring system or cctv - gooseneck , supply- visual monitoring system or cctv - power supply , supply- visual monitoring system or cctv - video management software license for camera , supply- visual monitoring system or cctv - storage capacity as per ts , supply- visual monitoring system or cctv - media convertor box type , supply- visual monitoring system or cctv - liu 06 ports , supply- visual monitoring system or cctv - fiber patch cords , supply- visual monitoring system or cctv - junction box , supply- visual monitoring system or cctv - ups for camera , supply- visual monitoring system or cctv - network rack , supply- visual monitoring system or cctv - liu 12 port , supply- visual monitoring system or cctv - media convertor card type , supply- visual monitoring system or cctv - power distribution box , supply- visual monitoring system or cctv - 6 core armoured fibre optic cable , supply- visual monitoring system or cctv - power cable , supply- visual monitoring system or cctv - cat-6 stp shielded twisted pair cable , supply- visual monitoring system or cctv - 25 mm gi conduit , supply- visual monitoring system or cctv - 32mm hdpe pipe , integration with existing servers and storage complete with software , etc of fo patch panels or liu, media converters or any other item within existing networking rack or supplied networking rack as applicable , etc of camera alongwith junction box complete with all accessories at camera end , f.o cables - laying and termination , power cable 3cx2.5sqmm - laying and termination , cat-6 stp cable - laying and termination , 25 mm gi conduit - laying , 32 mm hdpe conduit -laying
Tender For supply of shifting of pac units from jaisalmer to sardarpura and basni jodhpur - supplying of 0.63mm thick gss sheet , supplying of 0.80mm thick gss sheet , supplying of 1.00mm thick gss sheet , sitc of gi volume control damper , supplying and fixing of powder coated extruded aluminium return air grills with louvers , supplying and fixing of 4x16 sqmm power cable , supplying and fixing of control cable of 3x2,5sqmm , sitc of 40mm upvc pipe , sitc of 20mm upvc pipe , sitc ms cable tray 100mm width x 50mm x 1.6mm thickness , sitc ms cable tray 150mm width x 50mm x 1.6mm thickness , sitc of gi strip for loop earthing , dismantling and removing the existing laid old power or control cables , dismantling the existing old package units , recovering the existing laid refrigerant piping of old defective , dismantling the existing old ducts of package units , transportation of the existing fitted old dissmantled package a.c. units , itc of 7 tr sensible high precision ac package unit , supplying and charging of the referigerant gas r-407 , supply and fixing liquid line filter drier , supply and fixing of size 1-1 by 8 inch and 18 gauge copper referigerant pipe , supply and fixing of size 7 by 8 inch and 18 gauge copper referigerant pipe , supply and fixing of size 5 by 8 inch and 18 gauge copper referigerant pipe , laying of 1-1 by 8 inch recovered copper referigent pipe , laying of 7 by 8 inch recovered copper referigent pipe , laying of 5 by 8 inch recovered copper referigent pipe , providing ms structure for outdoor or indoor units , itc of 100mm width x 50mm x 1.6mm , itc of 150mm width x 50mm x 1.6mm , itc of old recovered 4x10 sqmm cable , itc of old recovered 4x1.5 sqmm cable , laying of existing 25 mm x 5 mm thick g.i. strip bid number/ & ( * ) : gem/2025/b/6140065 dated/ + : 15-04-2025 bid document/ 3 3 1 / 29
Tender For routine, breakdown maintenance, laying of ht, lt power cable, various control cables and cleaning of various cable trenches and cable trays as per scope of work of 2x500mw, btps, anpara.
Tender For corrigendum : construction of a new 220 kv terminal bay inside kptcl bajpe mrss, construction of approximately 3 km rcc cable trench and laying of 220 kv cables in rcc cable trench of approximately route length of 5.7 km, as per tender documents.
Tender For corrigendum : outsourcing of labour part for erection of new 11kv lt ht lines on poles dtfs augmentation sagging of acsr cables laying for t well connections gsc isc deloading of overloaded tfs shifting of meters earthing of dts or any development works
Tender For corrigendum : outsourcing of labour part for erection, testing commissioning of new 11kvlt/htlines on rail/pcc poles, distribution t/fs, augmentation/sagging of acsr of ht/lt lines, cables laying, guarding, stay setfor various works such as releasing of t/well c