Latest telescopic channel Tenders | Government telescopic channel Tenders

Central Government And Public Sector

CTN :45063818

12 May, 2026 NA

Multi City - Multi State

Tender For supply of item no.1 - cs cold rolled sheet as per specification attached,item no.2- structural steel plate as per specification attached,item no.3 - ms angle 50 x 50 x 6 mm as per specification attached,item no.4- structural steel channel as per specification attached,item no.5- steel flat isf as per specification attached,item no.6- isa angle structural steel re-rolled as per specification attached,item no.7- ms flat isf as per specification attached

Central Government/Public Sector

CTN :45000778

01 May, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - miscellaneous solid ms/cs scrap released consist of choke up, solid angle & channel , signalling item, point machine without motor, m.s. patti, junction box, location box, gate panel, padestal for elb, electric point machine siemens, lock post, ct rack, evaulator, rod, tljb, p bracket for point machine, pullys, m.s. sheets, ms conver, m.s. tanks, all type shock absorber, damper, all type of brake cylinder, all type of springs, wires, wires link, survo motor, signal post, base unit, ms rod, pipes, lever rod,ms rod/salliya, ms parts ,clamp, pool ,ms patti,bed plate, chequered plates,cs st bridge sleepers, ci plate used for steel bridge sleeper, rod, fillter jali, equilising beam, tools,bit,sabbal, all typ ,brake cylinder , electrical ms material, ci items , brake head ,spring, spring plank,cyl . tank, ohe items, clamps pully shock absorber, glude joint, frame, , solid cutting, solid nut-bolt, pin, and other pieces of cast steel item/ms etc with mey be minor attachment of inseperable non ferrous material (except-wta item). mode of delivery by actual weight fdp-40 days. material should be loaded with one end from lot as per description.

Central Government/Public Sector

CTN :45000779

01 May, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap released junk ferrous from lcw and others consisting of corroded material, ms cutting wagon plate, corroded plates, old sheet, drums, pipes, all type of rope wires, beds, electric fittings, racks, strechers, wheel chairs, corroded angle, channel, electric fitting, panels, cast iron signaling material location fox full and half,padastal for gate(signaling) panel board wire rod saria, panel box, almirah, chair, table small pieces of ms/cs, iron rod, side body fillter jali, loco electrical and signaling ms scrap and other corroded misc.items of all type of ms/cs kachra of sorts and sizes and old used unserviceable. (except wta items, spring, rail). careful cutting allowed for easy loading. fdp 40 days. material should be loaded with one end from lot as per description. mode of delivery by actual weight.

CTN :44961942

04 May, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

Central Government/Public Sector

CTN :44687281

28 Apr, 2026 3.00 Crore

Mumbai - Maharashtra

Tender For corrigendum : supply of module hostel furniture d d - boq 1 , boq 2 , boq 3 , boq 4 , boq 5 , boq 6 , boq 7 proving and fixing metal single bed of size: 2050l x 973w x 720h. material- headboard panels are made of 18 mm thick prelaminated particle board with 2 mm thick pvc edge banding all around. bed leg, frame structure consist of metal frame made of ms with the size of 50.8 x25.4 x 1.2mm thick. assembly inner slats of square stube 19 x 1.0mm thick ms erw tube as per is:7138. headboard & tail board: head board & tail board should be made up of square pipe 50 x 1.2mm & 25.4x1.0mm thick ms erw tube as per is:7138 and support bracket ms sheet is:513 head/tail board connected with bed frame with m8 bolt. construction- know down. bed shall be powder coated in thickness of 50-60 micron. mattress panel shall be made of virgin polypropylene with circular honeycomb structure. sheet shall have 09 layer of polypropylene with the gsm of 3000. bubble guard sheet shall be water proof, termite proof etc with 100% recyclable material. the manufacturer shall have iso 9001, 14001, 45001, 50001 accreditations by nabcb only, and cii certified green co gold, green guard compliance, aiota certificate and item shall be complete as per guiding image, manufacturer s specification and direction of engineer in charge, providing and supplying table with two drawer (overall size 900mm w x 600mm d x 750 ht). top shall be made up of 18mm thick prelaminated particle board confirming is 12823:1990 with 2 mm thick pvc edge banding. unrestructured and footrest shall be made of 25.4x25.4x1.2 mm thick erw tube with 50 microns powder coating. modesty shall be made of 0.8 mm thick crca sheet with approved shade of powder coating. storage drawer shall be made of 0.6 mm thick crca sheet and drawer shall be telescopic channel. storage shall have ) /bid number : gem/2026/b/7388588 * /dated: 28-03-2026 & & / bid document 1 / 17

Central Government / Public Sector

CTN :44942548

28 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122604 0634 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, ms meshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments location: road no.3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :44894378

22 Apr, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous and miscellaneous, material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, rubber items ,spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, plastic, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. wooden and railway track shall be excluded from the lot if found any.digging will be permitted only

Central Government/Public Sector

CTN :44630326

21 Apr, 2026 NA

Katipala - Karnataka

Tender For corrigendum : supply of 3700005065 heat exchanger - ea1706-a shell and tube heat exchanger. shell side moc 1.25 cr 0.5 mo. tube side moc 304l. tube side design temp and presure 295 c and 40.8 6 kg/cm2. shell side design temp and pressure 275 c and 48.44 kg/cm2 , ea1706-b shell and tube heat exchanger. shell side moc 1.25 cr 0.5 mo. tube side moc 304l. tube side design temp and presure 305 c and 40.8 6 kg/cm2. shell side design temp and pressure 295 c and 48.44 kg/cm3 , ea1706-c shell and tube heat exchanger. shell side moc 1.25 cr 0.5 mo. tube side moc 304l. tube side design temp and presure 330 c and 40.8 6 kg/cm2. shell side design temp and pressure 305 c and 48.44 kg/cm4 , ea1706-d shell and tube heat exchanger. shell side moc 1.25 cr 0.5 mo. tube side moc 304l. tube side design temp and presure 375 c and 40.8 6 kg/cm2. shell side design temp and pressure 330 c and 48.44 kg/cm5 , channel side gasket ea1706-a exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm th k ss304 inner ring and cs outer ring. , shell side gasket ea1706-a exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm thk ss304 inner ring and cs outer ring. , channel side gasket ea1706-b exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm th k ss304 inner ring and cs outer ring. , shell side gasket ea1706-b exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm thk ss304 inner ring and cs outer ring. , channel side gasket ea1706-c exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm th k ss304 inner ring and cs outer ring. , shell side gasket ea1706-c exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm thk ss304 inner ring and cs outer ring. , channel side gasket ea1706-d exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm th k ss304 inner ring and cs outer ring. , shell side gasket ea1706-d exchanger. spiral wound gasket. 4.5 mm thk ss304 winding and double jacketted graphite filled and 3.2 mm thk ss304 inner ring and cs outer ring. , ea1706-a shell and tube heat exchanger. bolting for girth flanges. stud with 2 nuts for shell to cover. moc sa 192 gr b7/ sa 194 gr 2 h , ea1706-b shell and tube heat exchanger. bolting for girth flanges. stud with 2 nuts for shell to cover. moc sa 192 gr b7/ sa 194 gr 2 h , ea1706-c shell and tube heat exchanger. bolting for girth flanges. stud with 2 nuts for shell to cover. moc sa 192 gr b7/ sa 194 gr 2 h , ea1706-d shell and tube heat exchanger. bolting for girth flanges. stud with 2 nuts for shell to cover. moc sa 192 gr b7/ sa 194 gr 2 h

State Government

CTN :44855971

02 May, 2026 NA

Chandigarh - Chandigarh

Tender For supply of consumable items d d - ms welding rod 3.15 x3 50mm , ss welding rod 2.50 x 350mm , stainless steel ball 1.4 inch , stainless steel ball 5.16 inch , telescopic channel 16 inch , telescopic channel 18 inch , gi nut bolt 3.16 x 2 inch , gi nut bolt 5.16 x 2 - 1.2 inch , gi nut bolt 3.8x3 inch , gi nut bolt 1.4 x 2.5 inch , gi nut bolt 6mmx2mm , gi nut bolt 7.5mmx2.5mm , cutting wheel 100x1mmx15 mm , hss hacksaw blade 1.2 x 12 inch , revolving chair wheel thread 2x3.8 inch , revolving chair wheel thread pin , hydraulic pump 10mm dia , gi washer 1.4 inch , gi washer 1.2 inch , gi washer 3.8 inch , gi washer 3.16 inch , mobile oil , grease

CTN :43725315

14 Apr, 2026 NA

Bangalore - Karnataka

Tender For bid to ras supply of channels and inbuilt storage of atelast 64gb with multi gpio , pbdv3 48 power distribution board dc dc convertor 100 watt multi channel 5 12 24 volt with low ripple , power switcher module ac dc switcher battery by ac switching upto 600 w with programmable function output 55v dc , optical receiver unit digital video by control signal to hdmi by dvi by uart convertor , ground control station 1000 nits or above contast ratio of 1000 1 mfd atleast 8 joystick interface with 4 5 hours of backup in magnesium by aluminium alloy with ip65 rating 6 kgs max , sensor suite gps by beidou by navic by glonass based positioning system encoder rx unit with 2500 ppr resolution dmc or direction finding sensor with less 2 degree accuracy , fpc arm 100 armored fiber optic cable outdoor 1530 nm fiber optic multimode dual cable with spool , wire harness assembly for power and control 6 a x 6 1 a x 6 cable harness assembly atleast 30cm length with ip65 casing , srg 20 optical slipring 20 wire plus lc lc by fc fc 1530 nm slipring multimode dual , tac imu07 tactical imu accelerometer plus by 8g gyro plus by 300 degree by sec magnetometer 8 gauss barometer 260 to 1260 mbar , hardened packaging unit with foam cutting abs grade plastic enclosure with foam cutting for easier transportability , multi power supply 1 point 2 kw vertical wind turbine and solar power module with charge controller and equivalent battery pack , sealing o rings as per mounting arrangment made of butyl by neoprene , lwir camera zoomable 30 155mm 640 x 512 px pelco standard with fiberoptic interface 35mk fov 1049 203m min to max at 2200m , power unit 12v at 500w power supply unit with auto switching capabilty from ac to dc with atleast 8 12 hours backup , carbon fiber light weight tripod with pan and tilt manportable collapsable tripod with height adjustable from 400mm to 600mm or above with elev upto 20 to plus 70 and 10 to 350 degree pan , extreme 3d pro joystick , electrical cable 4 sq mm x 4 core cable , electrical cable 1 point 5sq mm x 2 core cable , electrical cable 24awg x 4 core cable , electrical cable 24awg x 3 core cable , aluminium plate 10mm thk x 120 x 250mm is 737 gde 54300 2 point 8 kgs , aluminium plate 16mm thk x 350 x 1200mm is 737 gde 54300 18 point 5 kgs , aluminium plate 20mm thk x 130 x 200mm is 737 gde 54300 1 point 5 kgs , aluminium plate 22mm thk x 200 x 220mm is 737 gde 54300 2 point 7 kgs , aluminium plate 40mm thk x 60 x 100mm is 737 gde 54300 0 point 7 kgs , ball bearing as per sample , linear bearing 16mm id as per sample , steel hex boltt m4 x 12mm long hts hts , steel hex boltt m4 x 16mm long hts hts , steel hex boltt m4 x 20mm long hts hts , steel hex boltt m6 x 16mm long hts hts , steel hex boltt m6 x 25mm long hts hts , steel hex boltt m8 x 30mm long hts hts , steel hex boltt m8 x 80mm long hts hts , steel hex boltt m10 x 80mm long hts hts , steel hex boltt m10 x 12mm long hts hts , steel screw csk head m3 x 12mm long , steel screw pan head m4 x 10mm long , steel screw pan head m4 x 20mm long , steel screw pan head m5 x 20mm long , steel screw cs head m8 x 16mm long , steel washer 9 point 3mm dia , steel washer m8 , steel wing nut m5 , steel wing nut m10 , stainless steel eye bolt m8 , steel washer full split collar 12mm id x 10mm long as per sample lwir camera zoomable 30-155mm 1024 x 768 px pelco standard with fiberoptic interface,35mk,fov : 1154 m to 223 ( min to max) @2200m, laser range finder 4. 2 km laser for tanks, 2km for humans and 1km for uav with apd technology ,eye safe laser,1535nm ir laser, day camera 55x optical zoom camera with 42x digital zoom ,usb //bid details2 / 55

Telescopic Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors