Latest terminal motor Tenders | Government terminal motor Tenders

Central Government/Public Sector

CTN :40273525

10 Jun, 2025 1.39 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : "name of work : (a) provn of 02 x borewells with 25 hp motor and water pipe line connecting to existing over head tank of 50,000 gallon near double story qtr at 506 army base wksp, (b) spl repair/repair/replacement of shutters/doors at all repair bays of 506 abw, (c) repalcement /provn of electric motors and lt drive systems in eot cranes installed at arg bay and brake system of eot cranes installed at bofors section of 506 abw, (d) spl repair to lightening protection sys for mag no 01,03,04,05,06,07,08,10,13,15,17,26,30,31,32,33,35,36,37 electric room near mag no 37 ata old lab & ata proof yard and proof chember at asd of cod, (e)provn of 25 x desert window air cooler with stand ( iron) for jcos/ors in otm bldg of adm area of 506 abw under ge(e) jabalpur (f) provn of borewell for dilip complex alongwith oh filling pt at cmm jabalpur."

CTN :40568263

23 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of system protection valve , protective bag , oil filter , vaccum pipe booster nrv to t connector , cover assy , clutch release bearing , handle door inside , blade assy wiper , relay assy , valve assy solenoid , high pressure hose , flexible pipe hyd cylinder to outside , spring assy front , starter motor 12 v , assy auto tensioner , suction hose assy , tail light assy lh , miniature relay , cord hogh tension , oil seal ring , injector assy , brake fluid container assy , rotar final assy , coil assy ignition

State Government

CTN :40560629

23 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of laboratory equipments /laptop/printer - flash chromatography system model a1700x-200ml yamazen carporation, japan make, programmable elution modes: isocratic step, linear & rf gradient, pumping flow rate: 5-200 ml/min, maximum pressure: 1.5 mpa (15 bar/217 psi), no. of solvents: use up to 4 solvents in a gradient, uv detection: dual variable wavelength pda uv vis, detector 200-800 nm,uv detector sensitivity: 0.02-10.24 saufs, fractionation modes: time manual, peak, peak& slope (valley)02, automated densitometer with 4 reading channelsmake- genaxy/thistle/cleaverdensitometer a universal densitometer scanner with software capable of reading 144test per min. is available for band quantitation following post electrophoresis staining ordering information-cell as gel application packages equipped with bridges applicator and clinical test kit, 1x4 -specimen semi micro applicator volume applied sample band with compatible strip size: 5.7x14cm, cell as gel wet membrane bridges and densitometer, 1x8.5 cm bridge for 1x5.7x7x14cm or 2x2.5x14cm cell as gel. strip cat no. cslbg8.55 terbo scan software densitometer (excludes computer and scanner) cat no. csldens flat belt scanner for turbo scan software cat no. csscan, uv transilluminatormake- genaxy/thistle/cleaverresearch model: 312nm single wavelength transilluminator for detection of more than 0.1 ng of dna filter area (cm) uv 20 x 20cm , analytical balance make- aczet/radwag/sartoriuscapacity :220gm readability : 0.1mg repairability: 0.2mg response time: 2-3 sec pan size : 90mm display: lcd backlite calibration : motorized internal calibration, probe sonicator (touch screen) with sound proof enclosure make-labman/aczet/sonic temperature indicator and controller touchscreen display - 4.3 inches tft user password protection available microprocessor controlled and completely programmable. large lcd display with time setting. auto-tuning for convenience and optimal processing efficiency. variable power output control. auto frequency tracking output amplitude 0-100% adjustment. automatic fault alarm. frequency 20-25khz-automatic tracking process capacity 0.5-500ml (approx.) probe dia (titanium alloy) standard 6mm (1/4") display 4.3 inches tft display function temperature, power, time, etc. temperature range( c) 0-99 c timer (selectable) yes overload protection yes user password protection available input method touch screen control, data memory 20 groups output power 6.5-650w (adjustable) power supply : ac 220v/50hz, pulveriser/grinder make-ideal/mac/amccommercial dry grinder are used for grinding different types of products like spices, fresh ginger, salt, sugar, leaves, herbal products, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production. 3 hp motor deluxe model camber size: 10 x 5 cm. capacity: 20-25kg./hr., decoction apparatus gas operated decoction making machinemake-ideal/mac/amcvessel capacity: 15 liters for 1 to 5 lit production capacity, motor: /1 hp single phase motor fuel: lpg (fitted with i no. burners) all contact parts in 304 grade stainless steel complete structure in mild steel ready to use with all standard accessories wi s.s. bucket 10 ltr., s.s. mesh, & s.s. round tank, cooling centrifuge make-remi/eppendrof/thermo programable compensation for true sample temperature: yes pre cooling: yes acceleration profiles: 9 deceleration profiles: 9 & coasting fast spin: yes display: lcd control communication: digital parameters setting switches: bi-directional encoder brushless motor with frequency drive: yes inverter fault detection with auto shut down: yes cfc free refrigeration system: yes no. of programs: 99 last set parameters recall: yes choice of rpm/ref setting: rpm/rcf digital countdown timer 0-99 min & continuous run: yes automatic rotor identification: yes emergency lid lock release: yes password protection: yes gas hinge to prevent door falling: yes imbalance detection with centrifugatio

CTN :40575231

10 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of door system of tejas express. 1) left door locking device (pneumatic), part no. 3t103520r 53_c04 (01 no.) 2) right door locking device (pneumatic) part no.3t103520r54_c04 (01 no.) 3) door con trol unit part no. 3ed01921r52 (01 no.) 4) driving geared motor part no. 3kn300406r96 (01 no.) 5) emer gency device (internal) part no.3td90524r19 (01 no.) 6) emergency device (external) part no. 3td90524 r20 (01 no.) 7) universal surge relay (guard panel relay) part no. n74616 (01 no.) 8) relay module 2nc/4 s (guard panel relay) part no. n72590 (01 no.) 9) solenoid valve part no. 7wn400290p29_c04 (02 nos.) 1 0) locking cylinder part no. 3vt404900r01 (01 no.) 11) toggle switch part no. 8hn401198r02(02 nos.) 1 2) warning device (buzzer) part no.3ed99051r05_c01 (02 nos.) 13) cylinder part no.3vt404173r03 (01 no.) 14) outside led lamp (with ip protection) part no. 3ed99041r02_c01 (06nos.) 15) limit switch s1 pa rt no.8hn300431r12 (01 no.) 16) limit switch s5 part no.8hn401253r01 (01 no.) 17) limit switch s8 (98 % lock) part no.8hn300159r22 (01 no.) 18) male connector part no.stn41872 (02 nos.) 19) female conn ector part no.stn41869 (02 nos.) 20) female connector (allied) part no. n74281 (02 nos.) 21) connector combicon part no. 8fn401266r11 (03 nos.) 22) connector combicon part no.3ed00231r03 (04 nos.) 23) connector combicon part no. 8fn401266r12 (03 nos.) 01 set consist of 23 items (41 nos.) [ warranty p eriod: 30 months after the date of delivery ]

CTN :40540705

27 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.

Central Government/Public Sector

CTN :40539937

09 Jun, 2025 NA

Karimnagar - Telangana

Tender For supply of ventilation system for chp for ntpc telangana project - centrifugal fan sisw type of capacity 41600 cmh, motor 11kw 4p , exhaust air gravity louvers of size 500 x 400, to be fixed on mcc room wall, material of construction and painting details shall be as shown in typical drawing annexure 9 , pre fabricated gi supply air duct of size, segments, transition pieces, duct support fixtures like angle supports, anchor bolts, ms rods, gasket, corner, cleat etc. as applicable , double louvered double deflection type grill with volume damper of size 600 x 300 to be fixed in supply air duct , fusible link type fire dampers to be fixed in supply air duct, size 1200 x 900 including all electrical and c and i items as per mechanical requirement. , tube axial exhaust air fans with rain protection cowl with bird mesh and fixing support arrangement as shown in typical drawing of 19000 cmh capacity , tube axial fans with rain protection cowl with bird mesh and fixing arrangement as shown in typical drawing each of 2540 cmh capacity , propeller air fan with rain protection cowl with bird mesh and fixing arrangement as shown in typical drawing of 2210 cmh capacity , no. of man-days , no. of man-visits

CTN :40508135

18 Jun, 2025 NA

Kolkata - West Bengal

Tender For supply of lv7-tmb 9400-030-708 fuel injection pump , lv7-tmb 2786-1599-9966 starter motor 24 volts , lv7-tmb 2641- 4370-0111 repair kit air dryer assy , lv7-tmb 2573-5450- 9931 battery cut off switch , lv7-tmb 2574-4215-0113 wheel cyl with citradelip 44.45 mm dia , lv7-tmb 2699- 2910-0177 major kit clutch master cyl repair , lv7-tmb 2574-5420-9987 horn 12v , lv7-tmb 2786-0913-9909 air filter element safety , lv7-tmb 2520-012589 slave cylinder , lv7-tmb 2576-4374-0108 4 way system protection valve , lv7-tmb 1467-030-308 vane pump , lv7- tmb 2641-2910-0117 clutch master cylinder 19.05 dia , lv7-tmb 2654-5451-0119 combi switch ms harness , lv7- tmb 2754-2910-0106 clutch slave cylinder , lv7-tmb 2625-8081 field coil assy , lv7-tmb 2754-2910-0127 assy sleeve cyl , lv7-tmb 340-331-0050 bush king pin

Central Government/Public Sector

CTN :40473624

16 Jun, 2025 NA

Dhanbad - Jharkhand

Tender For supply of set of motor protection circuit breaker (mpcb), auxiliary contact and miniature circuit breake r (mcb) suitable for use in m/s sidwal & m/s intec make roof mounted cab air conditioning system of thr ee phase locomotives as per clw specification clw /es/3/0096 alt-l. one set consist of 11 items in 22 nos. as per annexure- a. make/brand as per clw item id 2100535. [ warranty period: 30 months after the dat e of delivery ]

CTN :40402719

10 Jun, 2025 NA

Kupwara - Jammu And Kashmir

Tender For tender for supply of mt spare - 2574 5420 9938 speedo cable 3 2mm dia 3000mm long i i , 2576 4374 0108 4 way system protection valve , 2576 7230 0147 assy handle outer door lh , 2608 5450 4901 relay starter solenoid , 2754 2910 0127 assy sleeve cyl , 2786 0798 9926 starter motor 12 volts , cvd f 4725500 ring spanner 10x 11 mm f1 5120 0002393 , cvd f2341500 combined stop tail lamp , cvd x 4704011 ring spanner 18x19 metric , dld atf 002 x4000600 filter element oil alt no x4001000 , f 4730111 de spanner 5 16 x3 8 bsf , f 4730200 hammer ball peen type 500gms , f 4734811 de spanner 12x13 metric , f 4735000 screw driver 200mm , ncvd 2060 58300104 8 ton jack with handle , ncvd f 4735100 adjustable spanner 8 , x 4700311 de spanner 19x22 metric , 254007100110 water separator , x 4700811 ring spanner 12x13 metric

CTN :40345032

05 Jun, 2025 1.50 Lacs

Barmer - Rajasthan

Tender For tender for supply of mt spare - rear hub bearing , primary shaft , system protection valve , fly wheel assy , hydraulic ram assy , brake chamber spring , big and bearing cell , head gasket , head light assy with motor rh , rear door lock , suspension bush kit , spider bearinig , combination switch , tank vehcoolar , 4st relay 24 , hand control valve assy , isolation switch , o ring tatra

Terminal Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector