Latest testing unit Tenders | Government testing unit Tenders

Central Government And Public Sector

CTN :43230374

23 Dec, 2025 NA

Kolkata - West Bengal

Tender For supply , testing and commissioning of testing unit for angle transmitter (master controller ) for wap7/wag-9 three phase ac locos as per following specn. a. facility of checking of cam switch conditions with respect to angle transmitters output current with the help of led indication. b. provision of one digital ma meter to measure angle transmitter current. c. provision of checking reverser switch status in forward natural & reverse conditions. d. provision of variable dc power supply & dvm. input supply require 230v ac/1a make: woama, aai, saitronox, secheron, kaysons, stesalit kolkata.

CTN :43229624

24 Dec, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of over voltage protection (ovp) testing unit for 4.5 kw rrus and errus of tl/ac coaches as per rdso smi no. rdso/pe/smi/tl/0047-2013 (rev.0) equivalent to make - kel, hmtd, ic electricals, j stone

State Government

CTN :42813292

23 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

CTN :43172254

23 Dec, 2025 NA

Nagpur - Maharashtra

Tender For e-tender for work of supply, installation, testing & commissioning of split air conditioner 2ton’s for 220 kv bcrs, relay testing room, maintenance & testing unit at 400/220kv koradi-1 substation under 400kv rs (o&m) division koradi.

CTN :42582731

19 Dec, 2025 15.66 Lacs

Faridkot - Punjab

Tender For bid to ras supply of lte mobile trainer kit , am modulaor demodulator kit , psk modulator demodulator kit , qpsk modulator demodulator kit , fm modulaor demodulator kit , am transmitter kit , arduino kits with modules , trainer board to study mux and demux , function generator , dc regulated power supply , trainer board to study the effects of negative feedback on the amplifier characteristics , trainer board of two stage transformer coupled amplifier , trainer board of two stage direct coupled amplifier , trainer board to study characteristics of class a amplifier , trainer board to study colpitt s oscillator , plc trainer kit , optical fiber splicing machine , optical time domain reflectometer , pcb etching machine , pcb drilling machine , portable wattmeter , portable moving iron voltmeter , portable moving iron ammeter , portable standard energy meter , single phase power measurment kit , digital energy meter , sliding rheostats , tachometer , three phase lamp load , single phase lamp load , single phase transformer , trainer board to study chopper , trainer board to study dual converter , trainer board to study cycloconverter , scr based lamp intensity control , voltage line tester , voltage line tester non-contact , multipurpose wire stripper and cutter , round wire gauge , dol starter , display board - different switches , display board - different wires and cable , model cut section ceiling fan ) /bid number : gem/2025/b/6844196 * /dated: 04-11-2025 & & / bid document 1 / 35

CTN :41843589

19 Dec, 2025 NA

Bathinda - Punjab

Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : supply of mechanical engg labs and workshop equipment d d - hydraulic system trainer kit , pneumatic system trainer kit , pelton wheel turbine test rig , francis turbine test rig , brake master cylinder , balancing machine , hydrometer , diesel fuel supply system , abs system trainer , transparent truck clutch structure model , electric vehicle kit , digital pyrometer , metallurgical microscope , spark test apparatus , standard prepared readymade samples or specimen with photographs , tool kit , ampere meter , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , voltmeter , valve key , leak detector to detect cfc and hfcs , thermostatic switch etc fitted on board , model of refrigeration cycle , digital anemometer , gas charging kit , model of open type refrigerant compressor , water cooler of 100 litre capacity , split ac test rig , actual cut section model of screw compressor , actual cut section model of rotary compressor , vapour absorption refrigeration test rig , vaccum pump , ice plant trainer , sling psychrometer , thermocouple , infrared thermometer , metallic cut section models of boiler mountings , model of nestler boiler , actual cut section model of four stroke single cylinder diesel engine , model of amal carburettor , digital vernier callipar , digital micrometer , height gauge , go-no go thread plug gauge , go-no go snap gauge , go-no go ring gauge , cylinder rollers and spherical balls , slip gauges set , vernier bevel protractor , surface plate , tool maker microscope , auto collimator with stand , angle deckor with set of angle gauges , profile projector , cylindrical bore gauge , screw thread micrometer , sine bar 125mm , sine bar 250 mm , feeler gauge , wire gauge , radius gauge , comparator stand , angle plate , mechanical comparator , clinometer , gear tooth vernier , metallic try square , meteric thread pitch gauge , electronic weighing machine , digital tachometer , simply supported beam apparatus , apparatus for determining centre of gravity of regular and irregular lamina , models of different wooden joints , models of screw threads , models nuts and bolts , models of locking devices , models of keys and cotter joints , models of riveted joints , models of bearing , models of pulleys , model of drilling jig , models of different types of gears , planner , milling machine conventional , power hacksaw , welding screen , gloves , oxygen regulator with spanner , motor coil winding machine , digital clip on meter , earth leakage circuit breaker, single phase , earth leakage circuit breaker, three phase , residual current circuit breaker, single phase , residual current circuit breaker, three phase , heat convector , desert cooler , electric oven , voltage stabilizer , digital energy meter , analog meggar , digital earth tester , plier , cutting plier 8 inch , leg vice 4 inch , round die handle , tap wrench- 5 by 16th of an inch to 1 inch , pipe vice , grinder , bench grinder 0.5 hp motor , scriber 8 inches , sheet steel wire gauge , circle cutting machine , edge folding machine , foot shear machine , rivet snap 0.25, 0.5, 0.75, 1 inch , rivet set 0.25, 0.5, 0.75, 1 inch , hand stake , funnel stake , round stake , taper stake , shovel , riddle , foundry bellow , silica sand , bentonite clay type , molasses , ladle , ladle holder , oil fired tilting type furnace , sand mix muller , moulding board //bid details 2 / 109

Central Government And Public Sector

CTN :42849341

18 Dec, 2025 3.23 Lacs

Raebareli - Uttar Pradesh

Tender For corrigendum : supply of 1air data test set dps450 , 2cable tensiometer meter , 3carbon monooxide meter , 4compass sight , 5dial test indicator , 6dc ampere meter , 7dc regulated power supply , 8dc volt meter , 9digital insulation tester dit 931 , 10digital micro ohm meter mi 3242 , 11digital micrometer , 12digital multimeter , 13digital multimeter true rpm 1003 , 14digital om meter agronic 53b , 15feeler gauge , 16high voltage ignition cable tester , 17hole gauge , 18hydraulic jack make canada 1 t da40 , 19hydraulic jack make canada 2 t da42 , 20hydraulic jack make chzeck 2 t , 21hydraulic jack tb 20 , 22hydrometer specific gravity , 23hygrometer , 24hygrometer model 123901 , 25insulation tester k141 , 26micrometer , 27pressure gauge , 28pressure gauge differential , 29pressure gauge differential , 30pyrometer infrared thermometer , 31ramp tester ifr 4000 , 32ramp tester ifr 6000 , 33ramp tester nav 402ap , 34spirit level , 35spring balance , 36spring balance digital , 37stop watch analog , 38stop watch digital , 39straight edge , 40suction gauge , 41surface plate 600m600m , 42telescopic gauge , 43thermo meter st 9269 , 44torqe screw driver , 45torque wrench , 46type pressure gauge , 47vernier caliper , 48vernier caliper digital , 49vernier height gauge

State Government

CTN :42577549

22 Dec, 2025 8.62 Lacs

Rewa - Madhya Pradesh

Tender For corrigendum : procurement of testing equipment for all power houses at thc sirmour - digital insulation testers (megger)range: 0-100/250/500/1000v, digital insulation testers (megger)range: 0-100/250/500/5000v, digital multimeterfeatures:dc & ac voltage; ac & dc current; continuity & resistance ; capacitance and inductance; checking of diodes/ transistors, single phase variable voltage autotransformers: details of single phase auto transformer 15a rating -input: 220v ac 10%; output: 0 to 270 volts.rating: 15 amps, three phase variable voltage autotransformers: details of three phase auto transformer 15a rating -input: 415v ac 10%; output: 0 to 500 volts, 3 phases.rating: 15 amps., tong tester cum multi meter (digital) (clamp on meter for ac measurements) specification for 0-1000a ac digital tong tester (clamp on meter) - current range: 0 to 1000 a (with settings of 1/10/20/40/100 a/500a/1000a auto ranging); voltage range: 0 to 60/300/600 v ac; accuracy: 0.3% or better, tong tester cum multi meter (digital) (clamp on meter for dc measurements) specification for 0-300a dc digital tong tester (clamp on meter) - current range: 0 to 300a (with settings of 1/10/20/50/100 a/300a auto ranging) ; voltage range: 0 to 60/120/300 v dc.accuracy: 0.3% or better., tong tester cum multi meter (digital) (clamp on meter for ac/dc measurements) specification for 0-100a ac digital tong tester (clamp on meter) - current range: 0 to 100 a (with settings of 00-20ma/100ma/500ma/1a/10a/50a/100a auto ranging); voltage range: 0 to 60/300/600 v ac; accuracy: 0.3% or better, digital phase sequence indicator: dial size: 96x96mm (minimum) ; working voltage: 50 to 500v ac; frequency: 25 to 60 cycles., digital earth resistance clamp meter with leakage current measurement

Central Government/Public Sector

CTN :41425818

18 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of dual range dc power supply : : - dual range dc power supply , 3 channel dc power supply , 35v 10a dc power supply , ac or dc withstanding voltage or insulation resistance tester , 9999 count hand held dmm with true rms measurement