Get complete information related to latest Textile Block Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Textile Block Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Textile Block Tenders.
Tender For supply of anti -tracking varnish tm [excuding hitachi tm]. alkyed resin based air drying pigmented red coloured varnish to is-10026 part 3 section 3 for class 130 for finishing coats on field coils and auxiliary machines i.e. bectol red f-93 of m/s. elantas beck india, pune or re-118 of m/s rotomac, new delhi.
Tender For supply of constr of sub base of 4 inch thick pcc of size 120 ft x 60 ft with layer of 60 to 40 mm stone metal mixed with murum or rolling with 8 to 10 ton roller with bm 35 mm thick and seal coat 15 mm thick,providing 5 layer synthetic acrylic standard system consisting of one coat of acrylic primer followed with two layer of acrylic resurfacer and the final two coats are of acrylic colour,line marking as per itf standards alongwith white taxtured acrylic paint,3 ft net posts made of ms pipe of 6 inch diameter set in concrete sleeves,standard 42 ft wide net doubles court made of braided polyethylene or polyester,10 nos phiips led flood light 200 watt mounted on 10 nos pole and diameter of the pole 3 inch square ms pipe of height 13 ft and underground 3 ft and above ground 10 ft,wiring of led flood light on pole with 200 mtr and 2 core electric cable
Tender For specification and application of the push cart conforming to indian standard is 2431 1963 iatest for singale wheel type wheel baeeow is 4184 1967 latest for two wheels type wheel barrow no product isi markedno cml number na nominal capacity of push cart 240 liters material used for manu facture rear wheel material type of chasssis frame sigle length of steel tube of 25 mm nominal bore any other suitable steel section, such as flat of size 25 x 3 mm, angle channel section of equivalent strength, suitably bent to form a support for the wheel and the body. ms with solid rubber type ms with solid rubber type front wheel material front wheel hdpe type minimum diameter of the axle/spindle 26 millimeter minimum nominal width of type 32 millimeterminimum diameter of the wheel301 millimeter number of partitions in bins for segregation 2 thickess of each partition 24.5 millimeter provision of rear side door to unload waste with handle and lock provision yes minimum diameter of front wheel 201 millimeter size of ball bearing 6205 25mm x 52 mm x15mm type of bearing/ bush double ball bearing finish of metal parts two coats of black bituminous paint conforming to is 158-latest gavanised other finish finish other two coats of black bituminous paint and gavanised na purchase of 03 wheel push cart for door to door collection with 04 bins of ltr capacity each
Tender For supply of material and job work under mc ew c of am to conservation and restoration of baoli stepwell inside pathargarh fort najibabad bijnor - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, c.r sand stone, r.r sand stone, brick aggregate, belgiri, gum, gur, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from naturalsources) (gst correction factor 0.973x7178.75=6984.92, steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (gst correction factor 0.973x172.60=167.94, excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete(gst correction factor 0.973x700.50=681.58, painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work(gst correction factor 0.973x155.90=151.69
Tender For capital overhauling / aoh 2025- painting to the hand rails around the ndct walking platform with one coat of primer and two coats of heat resistance aluminium paint 200 degree c and other areas with enamel paint.
Tender For supplying of material for construction of different type of works in the various village of sanand block ahmedabad district. - item no- 1 supplying common bunt clay bricks conventional size, item no- 2 supplyion of 53 or 43 grade open on pipe cement of isi approved brand, item no- 3 supplying of corse or fne sand on sie, item no.4 providing and fixing 35 mm thick shutter for doors and windows and clare story windos incuding anodised alliminiam butt hings with neccesary screw a indian teak wood (ii) fully glazed, item no. 5 providing and fixing windos having extruded aluminum colors anodizwd sction fram main outer size 127mm x 38.1 x 1.35mm item no.6 providing ventilateds with m.s. angle frame 30 x 30 x 5 mm, welding 10 mm sq. bars at 10 cms c/ outer side of frame, oil painting three coats by enamal paint, providing weld mesh jali in half width & louvered glassis 4 mm thick in reemaining width including all required materials etc. complet as directed., item no- 7 supplying marble kota stone of required size, item no- 8 supplying of glazed tiles x 15 x 6 cm size or approve size, item no- 9 supplying of vitrified tiles, item no- 10 supplying of enamel paint, item no- 11 supplying of enamel primer, item no- 12 supplying of distember primer, item no- 13 supplying of water proof cement paint, item no- 14 supplying of birla well care putty, item no- 15 supplying of plastic emulasion paints, item no- 16 suplying of indian type squating pan w.c., item no- 17 supplying of urinol ladis type full size, item no- 18 supplying of urinol stall type full size, item no- 19 supplying of 6 kg/ cm2 pvc pipe (a)20 mm dia, item no- 20 supplying of 6 kg/ cm2 pvc pipe (b) 32 mm dia, item no- 21 supplying of 6 kg/ cm2 pvc pipe (c) 110 mm dia, item no 22 :- supplying of upvc pipe 15mm, item no 23 :- supplying of upvc pipe mm, item no.6 providing ventilateds with m.s. angle frame 30 x 30 x 5 mm, welding 10 mm sq. bars at 10 cms c/ outer side of frame, oil painting three coats by enamal paint, providing weld mesh jali in half width & louvered glassis 4 mm thick in reemaining width including all required materials etc. complet as directed., item no- 7 supplying marble kota stone of required size item no- 8 supplying of glazed tiles x 15 x 6 cm size or approve size, item no- 9 supplying of vitrified tiles, item no- 10 supplying of enamel paint, item no- 11 supplying of enamel primer, item no- 12 supplying of distember primer, item no- 13 supplying of water proof cement paint, item no- 14 supplying of birla well care putty, item no- 15 supplying of plastic emulasion paints, item no- 16 suplying of indian type squating pan w.c. item no- 17 supplying of urinol ladis type full size, item no- 18 supplying of urinol stall type full size, item no- 19 supplying of 6 kg/ cm2 pvc pipe (a)20 mm dia, item no- 20 supplying of 6 kg/ cm2 pvc pipe (b) 32 mm dia, item no- 21 supplying of 6 kg/ cm2 pvc pipe (c) 110 mm dia, item no 22 :- supplying of upvc pipe 15mm, item no 23 :- supplying of upvc pipe mm, item no.-41 supplying of np-2 non pressare pipe 450 mm dia, item no.-42 supplying of np-2 non pressare pipe (d)600 mm dia, item no.-43 supplying of np-2 non pressare pipe (e)900 mm dia, item no.-44 supplying of np-2 non pressare pipe (f)250 mm dia, item no.-45 supplying of np-3 non pressare pipe (b)300 mm dia, item no.-46 supplying of np-3 non pressare pipe (b)450 mm dia, item no.-47 supplying of np-3 non pressare pipe (b)600 mm dia, item no.-48 supplying of np-3 non pressare pipe (b)900 mm dia part-4, item no- 49 supplying of 10mm aggregate, item no- 50 supplying of 20mm aggregate, item no- 51 supplying of 40mm to 63mm aggregate, item no- 52 supplying of stone dust, item no- 53 supplying of rubbel part-5, item no- 54 supplyin of galvenised corrugated sheet 0.8mm thick class-3, item no- 55 supplying of galvenised mild steel tube 50 mm dia, item no - 56 steel work welded, in built up sections, framed work including cutting, hoisting, fixing in position and applying a
Tender For mtps-ii civil circle - capital overhauling aoh 2025 - painting to the hand rails around the ndct walking platform with one coat of primer and two coats of heat resistance aluminium paint 200 degree c and other areas with enamel paint