Latest thermal scanning Tenders | Government thermal scanning Tenders

State Government

CTN :39984717

18 Apr, 2025 NA

Calcutta - West Bengal

Tender For supply of following items for setting up measurement and instrumentation lab for 4 year b.tech in electrical engineering curriculum and application for university of calcutta. - experimental set-up for calibration of a wattmeter using dc potentiometer with following features/items:regulated power supply 2 volts, 100 ma to operate the potentiometer.calibrated electronic standard cell voltage 1.0186 volts.regulated power supply 0-5 volts/0.5 amps with milliammeter 0- 500ma for current coil of wattmeter.regulated high voltage power supply 0-250 dc volts with voltmeter 0-250 volts for pressure coil of wattmeter.a panel mounting wattmeter 0-125 watt is required to perform the experimentgalvanometer for null balance.a volt ratio box for measurement of higher voltage.complete circuit diagram with wattmeter connections to be provided on the front panel of the instrument.with standard accessories, experimental set-up for low resistance measurement using kelvin s double bridge with following features:range: 0.2 micro ohm to 11 ohms, with an accuracy of 0.05 %required accessories:spot reflecting galvanometer. dc source 10 a with one analog current meter. attachment of 1 meter length.brass clamp with terminals for zero setting. with standard accessories, experimental set up for unknown capacitance measurement using de-sauty s bridge with following specifications:source: sine wave signal of 1khz. the amplitude of ac switch indicating lamp is provided on the bakelite board. two sockets are to be provided for the output of ac signals.detector: for detecting small ac signals in the output, null detector is required as in-built with digital display.circuit diagram:the circuit layout on the board is to be provided out to facilitate convenient working. 4 or 5 mm socket required for making connection. features:r2 --- three decade resistance dials having value 10 1000, 10 100 and 10 10 ohmsr1 ---- single decade resistance dial having value 10 100 ohmsc1 ---- unknown capacitor.c2 ---- two fixed standard capacitors having value 0.01mfd 0.1mfd (loss free)with standard accessories, experimental set-up for calibration of a 1-phase watt-hour meter with following scopes: to adjust & calibrate a single-phase energy meter by direct loading method to adjust & calibrate a single-phase energy meter by comparing with a sub-standard meterspecifications: static energy meter single phase: under test (local) duly mounted, wired and terminated static energy meter single phase: sub-standard meter (isi mark) duly mounted, wired and terminated voltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v ac ammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a ac wattmeter: dynamometer type ac single phase, multi-range with current coil 5 / 10 amp and potential coil 75 / 150 / 300 v ac variac: variable voltage transformer (portable table / floor mounting type with enclosure) input: 230v ac and output: 0 270v / 8 amp ac variable load: made up of 3 load resistors of 70 ohms / 700 w each duly mounted and connected / terminated to form different loads (35 to 210 ohms) as per external connections digital stop clock: portable with start / stop & reset operation set of necessary 4 mm spring loaded patch cords for interconnections detailed instruction manual supply to be connected: 230v, 1phase, 50 hz, ac mains, experimental set-up for calibration of a 3-phase watt hour meter with following specifications: to adjust & calibrate a three-phase energy meter by direct loading method to adjust & calibrate a three-phase energy meter by comparing with a sub-standard meterspecifications:static energy meter three phase: under test (local) duly mounted, wired and terminatedstatic energy meter three phase: sub-standard meter (isi mark) duly mounted, wired and terminatedvoltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v acammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a acwattmeter:

CTN :40011796

06 May, 2025 NA

Khandwa - Madhya Pradesh

Tender For supply and installation of physics instruments - c.r.o. dual trace 40 mhz: 1. type of input channels- analog and digital (mixed signal)2. number of analog channels-3. bandwidth - 300 megahertz.4. display type -colour tft.5. minimum display size- 10 inch.6. time base accuracy- 2.5 parts per million.7. sampling rate per digital channel simultaneously: 1gs/sec.8.record length per digital channel simultaneously- 8m point, function generator 0.3 to 3 mhz (scientific 10 mhz to 25 mhz frequency 1 channel function generator) : 1. frequency bandwidth (sine wave ) 10 mhz to 25 mhz.2. sample rate of arbitrary waveform generator (mega samples/sec)3. amplitude range (at 50 ohm impedance),10mv to 10 v pp., multiplexers and de-multiplexer with built in power supply :1. material- abs2. display- digital, verification of de-morgen s theorem with built in power supply : 1. type- digital2. consisting of built in power supply3. logic ics connected internally for 1st & 2nd theorem.4. 2 logic input switches with indcators.5. 1 logic output indicator.6. 3 patch chords to connect input and outputs., encoder and decoder circuit with built in power supply : 1. material- pvc2. equipment materials - glass epoxy front panel with pvc3. temperature range- -5 to 45 celsius4. output voltage(regulated) : 5vdc (internally connected), half adder, full adder, half subtractor, full subtractor with built in power supply: 1. built-in power supply dc +5 v at 500 ma.2. 3 logic input switches with green led display.3. 3 logic output red led display.4. two and gates ( 7408 ), one or gate ( 7432 )two not gates ( 7404 ) & two ex-or gates ( 7486 ) on panel., hall probe method for measurement of resistivity, complete with hall effect setup, hall probes, digital gauss meter, electromagnet and constant current supply. (complete apparatus) : 1. hall probe (ge crystal);(b)hall probe (inas).2. hall effect set-up (digital), dhe-213. electromagnet,emu-75oremu-50v.4. constant current power supply, dps-175 or dps-50.5. digital gaussmeter, dgm-102.6. range- 0-20 ma, apparatus to study characteristics of tunnel diode : 1. instrument comprises of dc regulated power supply of 0-600mv.1. two round meter for voltage & current measurement.2. circuit diagram is printing on front panel & important connections brought out on front panel.3. with well illustrated instruction manual, photo diode characteristic apparatus : 1. material- ms2. frequency- 50hz, photo transistor characteristic apparatus : 1. instrument type- analog, solar cell characteristic apparatus (complete apparatus) : 1. analog voltmeter: 12. analog ammeter: 13. solar panel/photovoltaic cell/solar cell to study characteristics: 14. range of dc voltmeter (in volt): 305. range of dc ammeter (in milli ampere): 506. necessary patch cords for interconnection7. along with instruction manual and demonstration, apparatus to study charging and discharging of a capacitor : 1. built in power supply : +12v variable & -12v, variable dc2. mains : 230v ac, ldr characteristics apparatus. : 1. voltage- 220 v2. apparatus type- analog3. temperature range- 50-60degree, plancks constant using solar cell : 1. instrument type- digital 2. built in power supply : +12v variable & -12v3. necessary patch cords for interconnection

CTN :39978574

25 Apr, 2025 20.78 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply of spares/miscellanious items for gis pahalgam for providing reliable power supply during sanjay 2025. - split inverter ac 1.5 ton 5 star hot and cold with avr and other accessories of standard make (for gis pahalgam), servo voltage stabilizer three phase oil cooled p-p 190-450 v : p-n:110-260 v ( with t-oil) , 15 kva (100 ltr. oil capacity), 36v 100ah float cum boast battery charger with full wave rectification for 220v single phase, 50hz ac input supply for (gis pahalgam), 33 kv single core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 400 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc), 33 kv single core outdoor type cable kit for 400 mmsq, 11 kv single core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 630 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc)for gis substaion panel mounted, 11 kv three core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 400 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc)for gis substaion panel mounted, 33 kv current transformer outgoing (33 kv, 1 , multi ratio multi core 600-300/1a, indoor type) (1 no. per ) for gis compatible 33/11kv station panel mounted, 33 kv current transformer incommer (33 kv, 1 , multi ratio multi core 900-600/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, 11 kv current transformer outgoing (11 kv, 1 , multi ratio multi core 200-400/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, 11 kv current transformer incommer (11 kv, 1 , multi ratio multi core 900-600/1a, indoor) (1 no. per ) for gis compatible 33/11kv station, 11 kv current transformer (11 kv, 1 , multi ratio multi core 600-300/5a, indoor) (1 no. per ) compatible to hartek panels at ais pahalgam, 33 kv current transformer for auxillary (33 kv, 1 , 30/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, potential transfromer 33kv/110v (1 , multi core indoor) (1 no. per ) for gis compatible station panel mounted, potential transfromer 11kv/110v (1 , multi core indoor) (1 no. per ) for gis compatible station panel mounted, over current/earth fault (3 o/c and 2 e/f relay abb type for gis compatible 33/11kv substation, providing and fixing 3 layer pp-r (poly propylene random copolymer) pipes conforming to is: 15801, uv stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all pp-r plain and brass threaded polypropylene random fittings. this includes testing of joints complete as per direction of engineer-in?charge. internal work-exposed on wall with clamps at 1.00 meter spacing pn-16 pipe , 25mm od(sdr-7.4) for replacement of damaged pipiline. (for ais and gis )

CTN :40002905

28 Apr, 2025 4.09 Lacs

Narsapur - Andhra Pradesh

Tender For supply and delivery of head water works water supply and maintenance materials in narsapur municipality - supply and delivery of following water supply head water works maintanance materials including all cost and conveyenace and all materials and charges etc.,, 1) 110 mm c i valves , 300mm ci valve ss spindle rods, brass nuts (300mm ci valve ss spindle rods), 250mm ci valve ss spindle rods, brass nuts(250mm ci valve ss spindle rods ), 200mm ci valve ss spindle rods, brass nuts (200mm ci valve ss spindle rods), 150mm ci valve ss spindle rods, brass nuts( 150mm ci valve ss spindle rods), 110mm ci valve ss spindle rods, brass nuts (100mm ci valve ss spindle rods), copper sulfate , 1 inch brass ball valves, 3/4 inch brass valves, 1/2 inch brass valves, 12 mm packing rope, 8mm packing rope, 4 inch pvc foot valves, 3 inch pvc foot valves, 2.5 inch pvc foot valves, 2 inch pvc foot valves, 1 inch pvc foot valves, 4inch ms flanges with threds, 6 inch ci foot valve atta full leather 4 holes, 1 inch hose pipe roll heavy duty, 3/4 inch hose pipe roll heavy duty, taparia greez guns 445 cc, taparia wrench set 6mm to 32mm , taparia ring wrench set 6mm to 32mm , taparia bench wise 5 inch , taparia plier , bosch cutter 800watt, hacksaw frame , hacksaw double side blades, electrical gum tapes , kathulu , reku kodavallu , bleaching bags for cleaning, supply of 48" (1200mm) sweep star rated ceiling fan, with double ball bearings, air delivery more than 200 cubic meter/min, but without regulator., makes: as per list of recommended brands. mat 03599 and ele5.1.3makes: crompton (hs plus/hs) / havells (es plus/ss390es) /orient energy star/halonix(zephyr)/polycab(synergy 50 isi) / g.m. (air wave premium)/bajaj-edge/arcline (glacier)., supply & delivery of 125a 3 pole mccb,25 ka mccb, adjustable, confirms to iec 60947-2 and is 13947-part 1 & 2, having breaking capacity . with thermal magnetic release panel mounted., makes: as per list of recommended brands as category i 125a 3 pole mccb,25 ka

State Government

CTN :39711294

28 Apr, 2025 NA

Manuguru - Telangana

Tender For corrigendum : supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin

State Government

CTN :39905521

14 Apr, 2025 NA

Bardhaman - West Bengal

Tender For some urgent supply materials required to use through out the year in durgapur sub-division hospital under durgapur electrical sub-division. - supplying and fixing 240 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection.[d-6/7] 6-32 a sp mcb (make-legrand/siemens/schneider), a) 6a, b)10a, c)16a, d) 20a, e)32a dp, f) 40a dp, g) 40a fp, h)63a fp, supplying and fixing 240/415 v mcb isolator ondin rail of existing dbs and necessary connection. (make-legrand/siemens/schneider)(d5/6), a)32a fp, b)40a fp, c)63a fp, d)100a fp, e) 32a dp, f) 40a dp, supply & fixing of 250v a.c capacitor, a)2.50 mfd (tibcon steel body), b)2.25 mfd (tibcon steel body), supply & fixing of 230v 1200mm sweep ceiling fan (28watt or less bldc fan, class of insulation -b, service value (cmm/w minimum 6.85, r.p.m. 350(min), thd 10%, supplied with remote control or wall mounted speed regulator, p.f. not less than 0.9, bult in 2.5kv spd with complete accessories[make: usha technix bldc, crompton, bajaj, atomberg, havells, orients, cg, rr or equivalent ](4 years warrenty), supply & installtion of 240v, single phase, 5-30a digital energy meter (iec standereds) fixing on hw wooden board on wall with suitable fixing arrangement. (make: l&t/hpl), supplying and fixing sheet steel main switches on flat iron frame on wall. 30/32 a(havells/standard/hpl), supply & fixing bobin insusator for ceiling fans., supply & fixing split pin for ceiling fans., charges for modification of some electrical wirings, changing of some of the bdbs, pdbs to provide suitable electrical connection for smooth operation of above mentioned 1 nos ups., sitc of 1000va 230v online ups to provide back up of 30 to 45mins having following specifications a)nominal input voltage : 230v, input freq: 40-70hz, input connections: hard wire 3wire. input voltage range for main operations: 160-285v b) output power capacity : 0.8 kwatts/ 1.0kva nominal output voltage : 230v. o/p voltage distortion : less than 5% topology : double conversion online wave form type : sine wave bypass : build in static bypass. back up time : 30 to 45mins on 100% load. warranty : 2 years on site warranty. ( 1 no.), supply & delivery of 12v 18ah battery with suitable size iron frame battery rack to fit all the batteries & also making connections with all the interlink cables. ( 1 nos of battery racks.), s&d of 5a, 3 pin socket (piano key type) (make- anchor/schindler/havells), s&d of 5/15a, 3 pin socket (piano key type) (make- anchor/schindler/havells), s&d of 5a piano key type switch (make- anchor/schindler/havells), s& d brass screws 2 inch for switch board fixing etc., s& d gypsum screws 1/2 inch for switch board fixing etc., s& d wooden ss screws 2 inch for switch board fixing etc., s&d of 1x1 sqmm pvc insulated cu. wire (make: finolex/polycab/havells)(for ceiling rows to fan motor), s&d of 1x0.5 sqmm pvc insulated cu. wire (make: finolex/polycab/havells)(for ceiling rows to fan tube light), supply wall mounted fan crompton 400 mm/ usha/orient (3 blade metal body), add gst @18% on total from item no 1 to 20, add lwc @1% on total from item no 1 to 21(except sl. no.11-20)

Central Government/Public Sector

CTN :39917414

17 Apr, 2025 NA

Mangalore - Karnataka

Tender For turnkey instrumentation (mkk/b903-000-yk-mr-2090/16) - supply of following items as per complete scope of mrgroup-a (as per mr top sheet)- instrumentation- b903, beacons, breather valves, differential pressure gauges, differential pressure flow transmitters, orifice plates & flanges, mass flow meter, gas detectors (hc/lel, h2s), guided wave radar lt, handheld configurator, hooter with push buttons, loop powered indicators, pressure gauges, pressure relief valves, pressure transmitters, radar level transmitters, temperature elements (rtd & thermowells), temperature gauge and thermowells, temperature transmitters, per diem rate for supervision of erection, testing and commissioning of mass flowmeters, gas detectors , radar level instruments - non-contact top mounted, guided wave radar - top mounted as per enclosed instructions to vendor.

CTN :39716052

19 Apr, 2025 NA

Purba Medinipur - West Bengal

Tender For notice inviting e-tender for supply, installation and demonstration of different equipments, instruments, trainer kits, models, study setupsetc. for different laboratories of electrical engineering department,dr. meghnad saha institute of technology, - complete trainer board of andersons bridge ( measurement of inductance), schering bridge to measure unknown capacitance, trivector meter, complete set-up for the extension range of ammeter and voltmeter by using shunt and multiplier., complete set-up for the extension range of ammeter and voltmeter by using ct and pt, complete trainer board of wheatstone bridge ( measurement of medium resistance), complete trainer board for verification of nortons theorem, delta connected load box with each arm variable inductor, capacitor and resistor, complete set-up for measurement of energy using ct or ct and pt, led lamps, 5w, 230v, led lamps, 10w, 230v, led lamps, 15w, 230v, led lamps, 20w, 230v, diac characteristics trainer kit, digital oscilloscope, half wave-controlled rectifier with resistive load and determine the load voltage., half wave bridge rectifier trainer kit, full wave bridge rectifier trainer kit, rheostat, rheostat, rheostat, rheostat, fully automatic star delta starter, make & test the control and powercircuit for forward and reverserotation of sq. cage induction motorusing contactor circuit., make & test the control and power circuit for automatic star-delta starter operation of sq. cage induction motor using contactor control., laboratory module for measuring solar radiation using pyranometer on tilted surface at different angles of inclination., laboratory module for solar photovoltaic cell to plot i-v characteristics and to find out the solar cell parameters (o.c. voltage, short circuit current, voltage-current-power at maximum power point, fill factor, efficiency)., laboratory module for measuring thermal performance of a solar cooker with varying reflector., cut section model of water turbine (francis, kaplan, pelton), laboratory module for solar pv plant to produce electricity, laboratory module for wind power plant of with a small wind turbine to produce electricity, kit for testing mcb & hrc fuse by performing the load test, mcb -6a, kit for testing mcb & hrc fuse by performing the load test, mcb -10a, kit for testing mcb & hrc fuse by performing the load test, mcb -1a of hrc fuse, kit for testing mcb & hrc fuse by performing the load test, mcb - 5a of hrc fuse, laboratory module for dismantling mccb/elcb/ rccb and identifying various parts, testing of induction type/ microprocessor based over current relay using relay testing kit, testing of static distance protection relay using relay testing kit, testing of static over current protection relay using relay testing kit, testing of directional over current relay (docr) by relay testing kit, testing of percentage differential protection of transformer using transformer differential relay (microprocessor based/static), laboratory module to study of different lightning arrester and identify different parts, laboratory module to study of acb/vcb and identify different parts, laboratory module for performing insulation resistance test on any one motor/transformer

State Government

CTN :39882595

17 Apr, 2025 867

Bengaluru - Karnataka

Tender For supply, installation and maintenance of science lab equipment to government first grade colleges under pmusha - lcr meter, ic 555 kit, specific heat of metals, photo cell experiment kit, pbeers law setup, pvoltmeter (ac) analog 0-260v, digital voltmeter 0-2v and 0-20v, ac ammeter analog, digital microammeter, milli ammeter, specific heat by electrical method, the ionization potential of mercury, patwoods machine, full wave and half wave rectifier kit, air wedge, resolving power of telescope, ballistic galvanometer with lamp and scale arrangement, pyoungs modulus by uniform bending, spring constant setup, surface tension by drop weight, pkoenigs method, psearles method, bar pendulum set, thermistor kit, pdecade resistance, decade inductance, zener diode kit, fractional resistance box, thermal conductivity apparatus, digital thermometer with probe, decade capacitance, pandersons bridge kit, pstefans law verification kit, pmicro ammeter analog, pstokes method apparatus, static torsion apparatus set , newtons ring setup, photo diode iv characteristic kit, helmholtz galvanometer, ionisation potential of xenon kit, i-v characteristic of tunnel diode kit, solar cell spectral characteristic with colour filters, planks constant by photo cell with optical filters, flywheel, plee and charltons disc method apparatus set, transistor characteristis cc ad cb, psonometer electromagnet ac step down transformer and slotted weight 500gm x 5, lcr series parallel resonance kit, fet characteristics kit, battery eliminator 2-12v/2a, abbe refractometer, hydrogen spectra apparatus, frank hertz experiment apparatus, constant deviation spectrometer, electronic spin resonance spectrometer, dielectric constant of solids and liquids, study of lattice dynamics kit, pvan der pauvs method, energy gap of semiconductor kit, plancks constant led kit, ppolarimeter, opamp power supply, stop clock, ptravelling microscope, spectrometer lc 0.5 min, multimeter, meldes experiment set, zeeman effect, ultrasonic interferometer, thomsons method, single power supply 0-30v, pquincks tube, op amp kit, millikans oil drop experiment, michelson interferometer, kbr press/pellet maker (automatic), kbr die, ic trainer kit, he-ne laser, hall effect, pgouys method, gm counter, pfunction generator, four probe setup, fiber optic kit with optical bench, dual power supply 0-30v, digital storage oscilloscope, bh curve set, gamma ray spectrometer, scintillation detector, lcr meter high end, interactive digital source meter, photo catalytic reactor, trinocular microscope with camera, refrigerator double door, incubator, bod incubator, dissection kits, water dispenser(hot & cold water), pdistillation unit, colony counter, cooling centrifuge, flask shaker, dna electrophoresis unit, autoclave vertical 22l, microtome, ultraviolet chamber, water bath, electric burner, electric hot plate, pheating mantle, pmagnetic stirrer, vacuum pump, spin coating unit, vibration mill, spectrophotometer, pph meter, muffle furnace, pmelting point apparatus, laminar air flow cabinet, ice maker machine, photplate with magnetic stirrer, hot air oven, potentiometer with calomel and platinum electrode, flame photometer, dissecting microscope, analytical balance, pdigital balance, pconductivity meter, pcolorimeter, pcompound microscope, centrifuge, pbinocular microscope, lcr meter, ic 555 kit, specific heat of metals, photo cell experiment kit, pbeers law setup, pvoltmeter (ac) analog 0-260v, digital voltmeter 0-2v and 0-20v, ac ammeter analog, digital microammeter, milli ammeter, specific heat by electrical method, the ionization potential of mercury, patwoods machine, full wave and half wave rectifier kit, air wedge, resolving power of telescope, ballistic galvanometer with lamp and scale arrangement, pyoungs modulus by uniform bending, spring constant setup, surface tension by drop weight, pkoenigs method, psearles method, bar pendulum set, thermistor kit, pdecade resistance, decade inductance, zener diode kit

CTN :39862405

29 Apr, 2025 5.60 Lacs

Kattappana - Kerala

Tender For purchase of lab instruments for physics core laboratory for the year 2025 under idukki package - digital function generator {0.2 hz to 2 mhz, sine, square, triangular wave, signal amplitude of 20vp-p output }, cro digital- 100 mhz dual channel, arduino set, daniel cell, equivalent, electronic digital vernier calipers, inch and millimeter conversion,lcd screen displays 0-6" caliper measuring tool, automatic shutdown, laboratory thermometer (lc:0.5 degree celsius , should measure upto 150 degree celsius), double slit with various widths marked on, prism equilateral- flint glass, with one face grounded (2"), prism equilateral- crown glass, with one face grounded (2"), voltage source (variable) [0-30 v, 2 outputs, digital display], digital multimeter with voltage ( ac- at least 200 mv to 500 v, dc), current ( ac and dc from ma range) , resistance, frequency, transistor gain (hfe) measurements, laser source- diode 650 nm, 5mw fixed on stand with power supply, solar cell characteristic apparatus, single slit, with various slits marked on the instrument, diffraction grating with 100 lpi/200 lpi/ 500 lpi or their combination with marking on the instrument (different lpi preferred), micrometer screw gauge 0-25 mm, 0.01 mm lc, screw gauge digital micrometer 0-25 mm, 0.01 mm lc, stainless steel digital vernier calipers, 6 inch, stop watch- electronic digital, spectrometer arrangement, lc 1 , travelling microscope, both vertical and horizontal movement lc 0.01 mm, quartz prism- equilateral, mercury lamp with pins ( not screw type), common weighing balance- digital , to weigh upto 10 kg, lc 1gm, digital light intensity meter (range 0 to 200000), katers pendulum, with holder, narrow angle (small angled prism angular measurement 5 x 87.5 x 87.5 ie 5 degree size 32 x32 mm) crown glass, travelling microscope, (bridge) horizontal movement lc 0.01 mm , for newtons ring and airwedge experiments, digital ic tester, analog stop clock (lc:0.5s), diffraction grating with 15000 lpi, digital oscilloscope dual channel input signal generator 100 mhz 1gsa/s sampling rate 7" tft display 240 kb storage, oscilloscope - 2.8" tft handheld digital oscilloscope kit portable automotive oscilloscope, 2.5ms/s high sampling rate, 200khz bandwidth, trigger function auto/nomal/single, helium neon laser 2mw, with power supply, half wave, full wave & bridge rectifier trainer kit, op amp trainer kit -to study op-amp inverting, non-inverting amplifier circuit, to study op-amp summer & subtractor, to study op-amp comparator circuit, to study op-amp voltage follower current follower, to study op-amp differentiator and integrator circuit.to study op-amp null detector, offset current & voltage circuit.to study op-amp clipping amplifier.to study op-amp sample & hold circuit.to study op-amp schimitt trigger circuit., hall effect apparatus complete set, 4 probe experiment apparatus for resistivity and bandgap of semiconductor, bh curve apparatus to study the retenvitya nd coercivity of a ferromagnetic material, apparatus to measureelectrical conductivity of metals and estimation of fermi energy., digital lab thermometer. resolution : 0.1 degree celsius, at least measure upto 200 degree celsius, horse shoe magnet for sonometer experiment (approx 6 inch), stainless steel ruler to measure upto 0.5 mm, digital lcr meter (range: 0.1 h to 20h, 0.1pf to 2000 f, 0.1ohm to 20mohm), special wire stripper for electrician decrustation pliers multi-functional wire stripper and cutter, wire cutter tool, wire cutter stripper, wire cutter plier, 25 pieces spanner set 6 mm to 32 mm

Thermal Scanning Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government