Latest thimble Tenders | Government thimble Tenders

Central Government/Public Sector

CTN :41542227

19 Sep, 2025 2.40 Lacs

Surguja - Chhattisgarh

Tender For corrigendum : supply of procurement of d link and j hook for coal tub rope cappel : : 5 =5 = - haulage rope cappel socket , hook coupling-j-hook , c-link, drawbar, 5 te , d-link, drawbar 5 tone , endless rope haulage clips , pedestial block , thimble rope cappel,

Central Government/Public Sector

CTN :41795558

18 Sep, 2025 99.5 Thousand

Siliguri - West Bengal

Tender For supplying and fixing of electrical fitments for newly constructed toilet of d coy barrack and new jamin toilet at stc bsf of north bengal electrical installation - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. group b, rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. group b, wiring for circuit/ submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire., wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire., supplying and fixing 3 pin 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required. 3 pin 5 amp, supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. size : 180mm x 100mm x 60mm deep., supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator). 8 way , double door., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole and neutralsingle pole and neutral., earthing with g.i. earth pipe of following size including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.5 metre long, 40 mm dia ., supplying and laying following size g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with gi thimble etc. as required.6 swg., supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted /welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. standard make., add applicable rate of gst @18% in place of 12% (0.0633mf) on dsr item. s no.(1 to 12), add 1% labour cess on s no. (1 to 12) + s no.13, modified estimate cost after using correction factor on account of gst @ 0.973 on dsr items s no. (1 to 12) + s no.13 + s no.14, supplying and fixing 3 mm thick phenolic laminated sheet cover in front of ms switch box including making hole and al. alloy/ cadmium plated iron screws, 20 mm, washers etc. as required.hylem/formica/anchor/as approved by engg incharge., supplying and fixing of 6 watt surface type trim cosmo panel square shape led light suitable for 240 volt, single phase, 50

CTN :41808083

22 Sep, 2025 1.00 Lacs

Kamrup - Assam

Tender For supply of drill bit , ms wheel , hss drill bit , magnetic bit , wire rope , turn buckle , dee shackle 1 alloy , wire rope clamp , wire rope wheel , ms nut bolt washer , wire rope thimble , ms pipe

CTN :41817713

07 Oct, 2025 NA

Multi City - Multi State

Tender For supply of pneumatic rubber fender_500mm dia x1000mm , fender hanging rope dia 12_pt.0235-523-8625 , thimble to suit dia 12rope_pt.0263-414-8625 , shackle dia 13 - patt. no. 0263-414-9703 , documents of pneumatic fender for orv

CTN :41778533

20 Sep, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of micro processor card , sdm card , relay card 14 relay , bridge rectifire , smps , contactor , single phase preventer , voice announcement card , v3f drive 10 hp , breaking resistor , brake coil , hrl button , door spring , door rope , door roller , door sensor , timing belt , reed switch pencil type , limit switch , inspection box button , inspection box complete , brake liner non asbestos , cabin fan , 1 sq mm 12core travelling cable flat , rope sensor , osg set , elevator rope 13 mm fmc , auto door cam , main pulley 560 mm , car guide shoe 9 mm , door operator set , battery 12v 18 ah , mosfet card , motor 10 hp , charging card , 1 pole mcb , safety block , bottom sill , scrolling display card , lop and cop display card , buffer card , led car light , intercom , battery for emergency light alarm , lock liver , pit switch , safety switch , thimble spring , safety rod , motor couple pulley , thrust bearing , gear box u600 , ard transformer , ard contactor , main transformer , osg rope 8 mm , timer card , diverter pulley , buffer spring , pulley pedestal , veture door contact , roping pulley , counter shoe liner , main shoe liner , essen type limit switch , door gibbs , fan and light card , fire man glass with switch , grease cup , cargate switch contact , magnets , osg roller , speaker , toggle switch , auto attend lock ) /bid number : gem/2025/b/6524398 * /dated: 10-09-2025 & & / bid document 1 / 68

Corporations And Associations And Others

CTN :41754736

17 Sep, 2025 NA

Rohtak - Haryana

Tender For supply of electrical material - aluminium thimble 300sqmm, aluminium thimble 50sqmm, axial fan make delta electronics inc., model pfb0824ghe-c9160999dd, dc 24v, 0.54 amp, 4 wire, bacalite sheet assorted size, carbon bush 50x32x16, 145kw, copper thimble 10sqmm, crc 2 26, make- bbl, electric motor 3 phase induction motor kw (hp) 1.10 (1.50), volt- 415, amb- 50c, rpm- 1415, frame size- nd90s, amp 2.61, delta, fz 50, 1p55, make- c.g, electric motor 3 phase induction motor kw (hp) 1.10 (1.50), volt- 415. amb 50c, rpm-1400, frame size- 90l , insulation f, duty s, amp 2.61 delta, fz 50, ip55, make- c.g/elmech, foot switch complete, p.v.c cooling fan 2hp frame size 90l suitable for c.g motor, proximity switch (senor) model sw4051-pcd1-b50(pnp-nc), supply (0-30)vdc, sn dist-0-20mm, load 400ma, make- jayshree, proximity switch (senor) model sp24/b/8er, supply 24vdc, sn dist-12mm, make- jayshree, proximity switch 10-30 v dc 400, model sw4051-pod1-b30(pnp-no), supply (10-30) vdc, sn dist- 0-15mm, load 400ma,, pvc cooling fan 1 hp, suitable for c.g motor, pvc cooling fan 15 hp, suitable for c.g motor, pvc cooling fan 20hp, nd160 suitable for c.g. motor, pvc cooling fan 3 hp, suitable for c.g. motor, pvc cooling fan 5 hp, nd112 suitable for c.g. motor, pvc cooling fan 7.5 hp, nd132 suitable for c.g motor, red backtol varnish, make- dr. beck, silica gel dry, slip ring for kw(hp) 560/751 motor voltage 11kv, de bearing size- nu230c3, ode-nu221c3&6221c3, vfd cooling fan 24vdc model- 3615rl-05w-b76 supp-24vdc 4-wire

CTN :39383693

16 Sep, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras corrigendum : supply of investment casting simulation software

CTN :41617903

13 Sep, 2025 NA

Ahmednagar - Maharashtra

Tender For bid to ras supply of , self cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml , self cure acrylic powder clear shade bottle of 110 gm with self cure acrylic liquid 110 ml , teeth anterior acrylic cross linked lower set of 6 , teeth anterior acrylic cross linked upper set of 6 , teeth anterior acrylic cross linked acrylic set of 16 upper and lower , wax blue for inlay , syring hypodermic cartridge type needle 25 mm size pkt of 100 , latex elastic intra oral pkt of 1000 1 oblique 4 inches , niti open coil spring 0 point 012 into 0 point 030 wire spool , niti close coil spring with eyelat pkt of 10 , arch wire niti copper preformed ideal uppper 0 point 016 roud , arch wire niti copper preformed ideal uppper 0 point 016 into 0 point 016 square , arch wire niti copper preformed ideal uppper 0 point 016 into 0 point 022 rectangular , arch wire niti copper preformed ideal uppper 0 point 017 into 0 point 025 rectangular , arch wire niti copper preformed ideal uppper 0 point 019 into 0 point 025 rectangular , arch wire niti copper preformed ideal uppper 0 point 021 into 0 point 025 rectangular , orthodontic boxes plastic , screws expansion small , green stick tracing , rubber base impression material , bur round tungsten carbide for fg 1 point 0 mm pkt of 3 , bur fissure flat cross cut tungsten carbide for fg 1 point 2mm , material temporary filling no mix single phase bott of 25 to 30 gm , mineral trioxide aggregate pkt of 1 gm , endodontic access burs set of 06 , elastic rubber separator , wedges , regular medium body elastomeric material 450 ml cartridge , bur diamond 1 point 0 , bur diamond 0 point 4 , sintered diamond 2 point 5 bur , sintered diamond 1 point 0 bur , sintered diamond 0 point 6 bur , bur diamond tapered , cotton wool absorbant pkt 500 gm , rolls absorbent cotton dental assorted sizes in box of 500 , gum paint sol , ceramic separating liquid , glaze powder cermco , dental floss or unifloss , nova bone putty , ceramic separator liquid isofix , die hardner liquid , de bublizer liquid spary 500 ml , marginal wax , cruible for induction casting machine set of 6 lidocaine lignocaine hcl 2 p with adrenaline/epinephrine (1:80000), latex & methyl paraben free glass, post extraction alveolar dressing material, pulp devitalizer, providone iodine germicidal gargle 2%, 10% providone iodine solutio, chloroxylenol solution potassium hydroxide 13.6g, chloroxylenol solution 50.5g oleic scid-7.5ml cast, abrasive mounted diamond fg round 1.8 mm, abrasive abrasive mounted diamond fg inverted cone 1.8 mm, abrasive mounted diamond fg cylindrical 1.2 mm, bur tungsten carbide for straight hand piece 7 mm, single piece immediate loading titanium dental implant with transfer coping and analog of 30 implants, denture adhesive powder bottle 10-15 gm, plaster dental stone pkt of 1 kg, wire ss round hard 0.8 mm coil of 500 gm, wire ss round hard 0.9 mm coil of 500 gm, abrasive, white acrylic fig 4 for straight hand piece, blasting materials aluminium oxide grain size 250u-pkt of 500gm, base acrylic resin powder pink shade bott of 450 gm and acrylic resin liquid bott of 227.3 ml, base acrylic resin powder clear shade bott of 450 gm and acrylic resin liquid bott of 227.3 ml, box denture appliance, sintered diamond burs for grinding metal for shp, sprue wax, mta based root canal sealer pack of 2-3 gm, crown and bridge investment graphite free for np alloy powder 40 pkts of 160-180 gm each and liquid of 1ltr, crown and bridge investment np alloy liquid 1 litre, crown bridge metal np alloy for box of 1 kg, crown bridge separating liquid 500- 1000ml, crown and bridge spacer die 20-30 ml bottle with thinner, carbide cutter pointed medium grit size 60 for shp, //bid details 2 / 50

Central Government/Public Sector

CTN :41391374

12 Sep, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of item# 1 mfg & supply of radial stator / radial stator / s/c for supply of investment casting for p , item# 2.714731- fdi-5541-tl tool for radial stator

CTN :41757435

25 Sep, 2025 1.90 Crore

Dehradune - Uttarakhand

Tender For supply of biosafety cabinet class ii a2 with thimble ducting , automated hormone analyser clia based , centrifuge fixed head table top 16 tubes. up to 6000 rpm , centrifuge tabletop swing out with 8 tubes. up to 6000 rpm , vdrl rotator shaker , binocular microscopes , elisa reader with washer , refrigerator 400 litres , deep freezer minus 20 deg c , deep freezer minus 80 deg c desirable , vertical autoclave for sterilisation 100l , vertical autoclave for disinfection 100l , vortex mixer , electronic balance up to 3 decimal places , hot air oven medium size , hot plate for culture media preparation , incubator 2 medium sized , manual cell counter , micropipette 0.1 to 2 microliter , micropipette 1 to 10 microliter , micropipette 5 to 50 microliter , micropipette 50 to 200 microliter , micropipette 200 to 1000 microliter , multi channel pipette octapipette 200 to 1000 microliter , potential of hydrogen meter ph meter , bunsen burner , micro centrifuge machine up to 16000 rpm , pcr workstation , blood gas analyser , binocular microscope led with camera desirable

Thimble Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector