Latest third party quality assurance Tenders | Government third party quality assurance Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government And Public Sector

CTN :45610532

20 Jul, 2026 NA

Dibrugarh - Assam

Tender For supply of soft blanket check pattern maroon shade superior quality with four side satin piping (not less than 4 stiches per cm). dimension 215cmx120cm, fibre content 60% wool,15% nylon, balance others, weight g/m2=450 gsm, breaking load(min) on 15cmx20cm(strip) (a) warpway= 110 kgf, (b) weftway= 85 kgf, ends per inch =25(min),picks per inch 20 (min.), weave= 2/2 twill. the blankets shallbe properly washed and shall be free from grease, soap, filling or any other admixture which would give fictitious mass or firmness. the blankets shall be milled and given a raised finish. for sampling, testing and other details, is:894 of 1980(latest revision) may be referred with above specification. 25mmsatin border of matching colour with "ir" monogram embroidered in a corner. the date of month and year of manufacturing and manufacturer name should be labelled in one corner clearly. material spec:is 894/2023 with latest alteration. [ warranty period: 24 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45354239

25 Jun, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : supply of dynamometer load range 0 4 kg , calibration of dynamometer load range 0 5 kg , calibration of dynamometer load range 5 15 kg , calibration of dynamometer load range 15 55 kg , calibration of dynamometer load range 0 500 kg , calibration of dynamometer load range 0 200 kg , calibration of dynamometer load range 0 50 kg , calibration of dynamometer load range 0 150 kg , calibration of dynamometer load range 0 5000 gram , calibration of dynamometer load range 0 80 kg , calibration of dynamometer load range 0 2 ton , calibration of dynamometer load range 0 5 ton , calibration of dynamometer load range 0 300 lbs , calibration of dynamometer load range 0 10 ton , calibration of aircraft weighing kit load range 5 ton , calibration of aircraft weighing kit load range 10 ton , calibration of universal testing machine load range 0 500 kg , calibration of universal testing machine load range 0 1000 kg , calibration of universal testing machine load range 0 3 ton , calibration of universal testing machine load range 0 5 ton , calibration of universal testing machine load range 0 10 ton , calibration of universal testing machine load range 0 20 ton , calibration of universal testing machine load range 0 50 ton , calibration of master dynamometer load range 0 1 kn , calibration of master dynamometer load range 0 5 kn , calibration of master dynamometer load range 0 10 kn , calibration of master dynamometer load range 0 50 kn , calibration of master dynamometer load range 0 100 kn , calibration of standardizing box load range 0 200 kn , calibration of traction power tester load range 0 500 kn , calibration of load cell load range 0 25 kn , calibration of new dynamometer load range 0 5 ton , calibration of new dynamometer load range 0 25 ton , calibration of dynamometer load range 0 5000 gm , calibration of traction power testerload range 0 500 kn

Central Government/Public Sector

CTN :45608034

09 Jul, 2026 NA

Raigad - Maharashtra

Tender For tender for ultra sonic thickness tests, hydraulic test and certification of pressure vessels, various size pipelines and load testing of lifting tools and tackles/lift as per statuary requirement in prescribed form no 11/12/13/13c.

corporations/Associations/Others

CTN :45585969

23 Jun, 2026 52.06 Lacs

Sonipat - Haryana

Tender For supply, installation, testing and commissioning of lt underground cables with allied items for various buildings in dbranl university, rai, district sonipat. - hsr part[23.22.1.12]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.12. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. 4 pole mccb 300 to 400 amp , 50 ka [through rate], [23.22.1.13]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.13. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. 4 pole mccb 600 to 800 amp , 50 ka [through rate], [23.22.1.3]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.3. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. triple pole mccb 16 to 100 amp, 25 ka [through rate], [23.22.1.5]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.5. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. triple pole mccb 200 to 250 amp, 25 ka [through rate], [23.22.5.1]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.1. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 6 amp. to 32 amp single pole [through rate], [23.22.5.7]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.7. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 6 amp. to 32 amp mcbs four pole [through rate], [23.22.5.8]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.8. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 40 amp to 63 amp. mcbs four pole [through rate], [23.22.8.4]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.4. sitc four pole on load manual change over switch in ss enclosure of following ratings 300 amp 415 volts [through rate], [23.22.8.5]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.5. sitc four pole on load manual change over switch in ss enclosure of following ratings 400 amp 415 volts [through rate], [23.23.6.4]miscellaneous 6.4. supply and erection of ms cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of engineer-in charge of the work. ms perforated cable tray painted with powder coating 600 x 50 x 2 mm [through rate], [23.23.7.4]miscellaneous 7.4. supply and erection of cable tray cover made of 1.25 mm thick gi sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of engineer-in charge of the work. gi cable tray cover , suitable for cable tray of 600 x 50 x 2 mm [through rate], [23.24.1]ms stand, bus bar chamber and panels 1. supply and erection of m.s. angle iron frame duly welded for housing m.s. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of

State Government

CTN :45277350

25 Jun, 2026 8.46 Crore

Hyderabad - Telangana

Tender For corrigendum : supply, erection, testing and commissioning of (i) conversion of existing 132kv 2-ph double circuit line to 3-ph double circuit line (4.5km) from 220/132kv ss malyalapalli (with an addl. load of 9 mva to a total load of 26mva) along with erection of new 132kv 3-ph dc line of 4km to proposed 132kv railway traction substation (rtss) at ramagundam (ii) 2nos feeder bays at 220/132kv ss malyalapalli and (iii) 2 nos 132kv metering bays at proposed ramagundam rtss in peddapally district on turnkey basis

Central Government And Public Sector

CTN :45384536

03 Jul, 2026 8.50 Crore

Hyderabad-T - Telangana

Tender For corrigendum : supply, installation, testing and commissioning of 11kv substation works for tube plants load centre at nfc, hyderabad

CTN :38065938

18 Jul, 2026 NA

Surat - Gujarat

Tender For corrigendum : supply, installation, commissioning and testing of a load break switch (lbs) for a dtr rating of up to 200 kva

CTN :45261219

25 Jun, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of tas revamp at kadapa terminal c c - supply of 3inch mfm with 4inch flange , erection, tandc of 3inch mfm , supply of 2inch mfm inc 2inch nrv , erection, tandc of 2inch mfm , camc of supplied mass flow meters , supply - 4inch sae with dpg , erect and comm of 4inch sae , sup-rtd cm temp transmitter , testing and commng of rtd , sply 4inch dcv , erect and comm of 4inch dcv , sply 2inch piston type dcv , erect and comm of 2inch dcv , sup - 2inch sae with dpg , erectand comm - 2inch sae , sup dual arm bcu , erect and comm of bcu , sup of rit , erect and comm of rit , sup-additive block-powrandtrbo , erect and comm of additive block , sup of proximity card reader , supply of proximity cards , supply and inst of face readers for biometric , barrier gate , erection and commissioning of barrier gate , terminal server - 16 port , erect and comm - terminal server , cabling works for shifting of metering assembly , mandatory spares-gantry equipm , armoured cat6a cables with shielded rj45 connectors , sup - 24cx1.5 sq. mm - frls , sup - 8 cx1.5 sq. mm - frls , sup - 4 cx1.5 sq. mm - frls , sup - 3cx2.5 sq. mm - frls , sup- 1px1.5 sq. mm - frls , sup- 2px1.5 sq. mm - frls , sup- 12 px1.5 sq. mm - frls , lay -all type of cables , load rack server , client pcs , terminal automation software , manday assistance , resident engineer during stabilisation , camc of supplied tas equipment , camc of free issue items , camc period load rack server , camc period client pcs , 24 port ethernet switch , process plc

CTN :45593148

27 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of testing of earth pit , testing of relay , thermography of equipment , preparation of earth pit layout , testing of insulation mat , load testing of battery bank , transformer oil testing , testing of transformer tan delta , testing of transformer partial discharge , routine testing of transformer , servicing and testing of vcb , wti winding temperature indicator calibration , oti oil temperature indicator calibration , buchholz relay testing , testing of third harmonic la , testing of vcb bottle , vlf testing of cable 100 percent , polarization index testing motor , insulation resistance testing , electrical safety audit , calibration of voltmeter , calibration of ammeter , cablibration of energy meter , cablibration of power factor meter , acb servicing and testing , pair of ht electrical gloves, 25 kv, is 13774 2021 , pair of lt electrical gloves, 1.1 kv, is 4770 1991 , insulation mat 2.5 mm, lt, is 15652 , insulation mat 3 mm, ht, is 15652 , oltc oil testing as per is 1866 , dga of transformer oil , transformer oil filtration , thermal omicron b2hv relay test , testing of mccb , testing of rccb , pi of power cables , current transformer testing , digital megger meter , led 300 watts for high mast tower , digital ampere meter , communication cable tester , digital clamp meter * /bid number : gem/2026/b/7664367 + /dated: 17-06-2026 ' ' / bid document 1 / 51

Third Party Quality Assurance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government And Public Sector