Thyristor Controller Tenders

Get complete information related to latest Thyristor Controller Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Thyristor Controller Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Thyristor Controller Tenders .

Filter

Loading....

Get Tender in Email

CTN :38329012

18 Dec, 2024 NA

East Sikkim - Sikkim

Tender For bid to ras tender for supply of shovel round nose with handle 2.3 kgs excluding handle weight , spade with handle 1.8 kgs excluding handle weight , crowbar tempered 1650 mm long with across , wheel barrow steel double wheel , wheel barrow steel single wheel , measuring tape metalic 5 mtr long , measuring tape metalic 15 mtr long , axes felling 2kg with handle , hack saw frame fixed with blade size 12 inch , duoble faced sledge hammer fully hardened and tempered 1 kg weight , duoble faced sledge hammer fully hardened and tempered 2 kg weight , duoble faced sledge hammer fully hardened and tempered 3 kg weight , duoble faced sledge hammer fully hardened and tempered 3.5 kg weight , duoble faced sledge hammer fully hardened and tempered 5 kg weight , spirit level 12 inch steel body , spirit level 24 inch steel body , electric line tester , soldering wire , gloves for insulation electrician , flat chisel 0.5 inch , flat chisel 2 inch , round chisel 0.5 inch , round chisel 1.5 inch , half round chisel 0.5 inch , half round chisel 1.5 inch , mortise chisel 0.5 inch , mortise chisel 0.75 inch , carpenter try square 8 inch , carpenter try square 15 inch , file triangular 6 inch , plum bob 8 ozs , mason trowel 4 inch steel with handle , pan mortar standard , hack saw blade size 12 inch , multimeter digital standard , mason square 24 inch x 12 inch , racker 12 prong ms 12 inch long with wooden handle , soldering iron , earth rammer with handle , bitumen pouring cane 10 ltr cap , cube mould , tile cutting machine , ring spanner set of 12 pcs (6x7 to 30x32) , de spanner set of 12 pcs (6x7 to 30x32) , hammers ball pin , cutting pliers , adjustable spanner , empty tool box , nose plier , flat plier , screw driver , mini hacksaw , mini hammer 200 gm , soldering paste , hacksaw 18 inch , claw hammer 200 gms , mason hammer , flat file , half round file , round file , wood drill machine , wood drill bit set , heavy duty drill machine for concrete , heavy duty drill machine bit set , jack planner 12 inch , jack planner 18 inch , jack planner 24 inch , smooth wood planner 6 inch , t bar clamp 6 inch , electric wood planer , hand drill machine with bit , carpenter stone , wood cutter machine with blade , electric grinder , exhaust fan 12 inch , cgi sheet 10 feet x 3 feet , aerial route recee equipment , almirah steel large 78 inch x 36 inch x 19 inch , almirah steel small 50 inch x 30 inch x 18 inch , mattress 6 feet 6 inch x 3 feet 6 inch , revolving office chair , office table , charpoy bed with ply top 6 feet 6 inch x 3 feet 6 inch , hume pipe 1200 mm dia x 2.5 mtr long of np3 standard , water geyser 15 ltrs cap , cgi sheet 10 feet x 4 feet (pre painted) , j hook with nut and bitumen washer , pbs roll (tar felt) having 3 feet width and 20 mtrs length in each roll , linoleum sheet , curtain 7 feet long , door mat , steel rod for curtains , ceiling light white , ceiling light yellow , heavy duty plastic wheeled dust bin 60 ltrs cap , steel hot case , lpg stove double burner , kerosene bhatti with electric motor , kerosene stove burner (4 no) , iron tawa big size for ors mess , degchi/patila 24 inch with lid , degchi/patila 22 inch with lid , degchi/patila 20 inch with lid , degchi/patila 18 inch with lid , degchi/patila 16 inch with lid , degchi/patila 12 inch with lid , rubber pipe/flexible pipe 1inch dia for water supply , rubber pipe/flexible pipe 1.5 inch dia for water supply , parat aluminium 24 inch , steel plate , steel glass , katori bowl , tea spoon , service spoon small for cooking , service spoon medium for cooking , service spoon large for cooking , iron palta , kadai iron 30 inch , kadai iron 24 inch , kadai iron 18 inch , kadai iron 15 inch , pressure cooker 20 ltr , pressure cooker 10 ltr , pressure cooker 5 ltr , pressure cooker 3 ltr , steel bucket , steel jug , gas stove with regulator , pipe and lighter , gas bhatti , idli maker , mixer grinder heavy duty , dinner set (bone china) , dosa tawa , frystrainer small , frystrainer l

State Government

CTN :38402559

27 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of machineries & equipment for the electrician, fitter, lift & escalator mechanic, mechanic motor vehicle, machinist, operator advance machine tools, refrigeration air conditioning technician, solar technician, technician medical electronics, wireman, & welder trades.. - ac - air conditioner schedule, frost free refrigerator 200 l, three/four door refrigerator invertor (type), evacuating and refrigerant charging station, split a/c 1.5 ton with r32 refrigerant, duct able split a.c 3 ton with r410a or r-32 scroll compressor, cassette air conditioner 4500 kcal/hr, de scaling pump set, water cooler storage type, air conditioning, direct system complete with all controls including humidity control., air-conditioning, indirect system. (water cooled ), package a/c 5-ton capacity, bus a/c tutorial model, automatic ice cube m/c 50 kg/hour, vrf/vrv unit with two indoor units, split a/c (invertor technology), walk in cooler puf, air conditioner split type 2 tonne, au - automobile schedule, working model of air brake assembly, full floating axle and semi floating axle assembly, automative exhaust 5 gas analyser and diesel smoke meter (for petrol & diesel), diesel engine crdi - 4 stroke for dismantling and assembling with swiveling stand., multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer, cut section of 6 cylinder diesel engine in moving condition to show movement of internal parts, diesel engine six cylinder in running condition, air bag simulator, air conditioning service unit (car), four stroke petrol engine with cng setup-working condition, mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling, transfer case with stand for dismantling and assembly., two post car lift capacity 4000 kg, tyre changer machine motorized pneumatic type,, ultrasonic injection cleaning equipment, wheel alignment machine computerized 3d, wheel balancing machine, working condition of petrol mpfi engine assembly with fault simulation board, el - electrical schedule, oil testing kit:, solar panel 18 watt with battery, d.c. shunt generator with control panel 2.5kw,220v, motor-generator 5 kw (ac to dc), d.c. compound generator with control panel, motor- generator (dc to ac), synchronous motor 3 phase, 3 hp, 440 volt, 50 hz,4 pole, with all panel board accessories, three phase transformer shell type, electrical machine trainer, diesel generator set, dc generators series, shunt & compound type, solar street light, solar traffic light, solar d.c pump, solar panels, solar street light lamp set, motor- generator 3 kw (ac to dc), es - solar schedule, weather monitoring station, solar cell based sunlight radiation meter, solar simulator for solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells., solar tracker demonstrator kit, solar pv e-learning software using animations for trainee, solar pcu, solar grid tied inverter demonstrator kit, solar, wind, hybrid power plant, used water treatment solar plant demonstrator kit, demonstration kit for wind generation (wind turbine with blower), le - lift & escalator schedule, elevator control panel suitable for 5/8 passenger lift having separate input, output and cable alley chamber fitted with plc controller and related accessories., servo motor trainer 250w, 220/110v, working model of escalator, electromagnet brake assembly, door simulator set (car door, landing door and door drive unit), 5/8 passenger lift installed with all control and safety accessories, lm - light machineries schedule, drilling machine pillar 0-20 mm capacity with swivel table motorized with chuck and key, power hack saw machine 18 hydraulic, surface plate c.i 600 x 600mm with suitable stand and closed cover, slip gauge metric set 87 pieces in a box, work shop grade, drilling machine bench sensitive 13 mm capacity, slotter with base chuck, hm - heavy machineries schedule, pneumatic trainer k

CTN :38365729

18 Dec, 2024 NA

Kargil - Jammu And Kashmir

Tender For supply of tool and equipment - almirah small , inch tape 5 mtr , cutting wheel 4inch , high voltage resistant electrician work gloves , jump starter bty booster

CTN :38315822

18 Dec, 2024 1.35 Crore

Thiruvananthapuram - Kerala

Tender For purchase of tool and equipment in electrician trade in various itis under scdd - tool and equipment in electrician trade, contactor & auxillary contacts 3 phase, 415 volt, 25 amp with 2 no and 2 nc, contactor & auxillary contacts 3 phase, 415 volt, 32 amp with 2 no and 2 nc, limit switch - limit switch, liver operated 2a 500v, 2 contacts, rotary switch 16a/440v, relay- a.cut out relay 16a,440v, relay- b.reverse current 16a, 440v, relay- c. over current 16a,440 v, relay- d.under voltage 360v-440v, insulators including hardware fittings - pin type, insulators including hardware fittings - shackle type, insulators including hardware fittings - egg type, insulators including hardware fittings -suspension type, hydrometer, load bank ( lamp/ heater type) 6kw, 3ph, brake test arrangement with two spring balance rating 0 to 25 kg, laboratory type induction coil 1000 w, thermometer -digital 0-150 c, series test lamp 230v, 60w, knife switch dpdt fitted with fuse terminals 16 amp, knife switch tpdt fitted with fuse terminals 16 amp/ 440 v, miniature circuit breaker 16 amp, earth plate - 60cm 60cm 3.15mm copper plate,, earth plate - 60cm 60cm 6mm gi plate, earth electrode- primary electrode 2100 28 3.25mm, secondary cu strip 20 5mm, mccb - 100 amps, triple pole, elcb-25amps, double pole and 25amps, double pole, l n 30 ma, rccb-25amps, double pole and 25amps, double pole, l n 30 ma, fuses - hrc, fuses - glass, fuses - rewire type, rheostat (sliding type) - 0-25 ohm, 2a, rheostat (sliding type) - 0-300 ohm, 2a, rheostat (sliding type) - 0-1 ohm, 10 a, rheostat (sliding type) - 0-10 ohm, 5 a, capacitors - electrolytic, capacitors - ceramic, capacitors - polyester film, capacitors - variable, capacitors -dual run, various electronic components, various lamps - halogen, various lamps - incandescent lamp, various lamps - fluorescent tube, various lamps - hp mercury vapor lamp, various lamps - high pressure sodium lamp, various lamps - low pressure sodium lamp, various lamps - led, plug socket 230v, 5a, piano switch 230v, 5a, lamp holder 230v, 5a, cables:twisted pair, non -metallic sheathed cable, underground feeder cable, ribbon cable, metallic sheathed cable, multi-conductor cable, coaxial cable, direct-buried cable, bus bar with brackets (1 mtr each), rcc pole with accessories (ms angle iron, c-clamp, stay insulator etc.) and materials 6 mtr, safety belt standard quality, ohm meter;series type, 50/2000 ohm analog, ohm meter;shunt type 50/2000 ohm, digital multimeter, a.c voltmeter m.i analog, portable box type housed in bakelite case, milli voltmeter centre zero analog, portable box type housed in bakelite case (100-0-100 mv), ammeter mc analog, portable box type housed in bakelite case - 0- 500 ma, ammeter mc analog, portable box type housed in bakelite case - 0- 5a, ammeter mc analog, portable box type housed in bakelite case - 0- 25a, ac ammeter mi analog, portable box type housed in bakelite case - 0-1a, ac ammeter mi analog, portable box type housed in bakelite case - 0-5a, ac ammeter mi analog, portable box type housed in bakelite case - 0-25a, kilo wattmeter analog, digital wattmeter 230v, 1kw, 50hz, a.c. energy meter-single phase, 10a, 240v induction type, a.c. energy meter-three phase, 15a, 440v induction type, power factor meter digital 440v, 20a, three phase portable box type, frequency meter 45 to 55 hz, magnetic flux meter 0-500 tesla, lux meter- lux meter lcd read out 0.05 t0 7000 lumens with battery, tachometer -analog type-10000 rpm, tachometer -digital photo sensor type-10000 rpm, tong tester/clamp meter 0-100a (digital type), megger -analog -500v, 3- point d.c. starter for 2.5 kw dc motor, 4- point d.c. starter for 2.5 kw dc motor, wheat stone bridge with galvanometer and battery, single phase variable auto transformer 0-270v, 10 amp(air cooled), phase sequencer indicator 3 phase 415v, growler, ac starters: - for a.c motors of 2 to 5 h.p. - a. resistance type starter, ac starters: - for a.c motors of 2 to 5 h.p. dire

CTN :38324005

21 Dec, 2024 84.52 Lacs

Thiruvananthapuram - Kerala

Tender For purchase of general tools for various trades in itis under scdd - general tool and equipment in various trades, foot rule/ steel tape - 2 feet 4 fold /6m, steel- measuring scale - 12 inch, marking knife - 200mm length, try square - 200mm (good quality), bevel square - 50 mm, hand saw - 450 mm (heavy duty), tenon saw - 300 mm, metal jack plane - 335mmx50mm cutter, metal smoothing plane - 200mmx50mm cuter, firmer chisel bevel edge- 6mm width (with handle), firmer chisel bevel edge- 10mm width (with handle), firmer chisel bevel edge- 15mm width (with handle), firmer chisel bevel edge- 20mm width(with handle), firmer chisel bevel edge- 25mm width (with handle), mortise chisel -6mm width (with handle), mortise chisel-10mm width (with handle), mortise chisel - 15mm width (with handle), screw driver - 300 mm (heavy duty), mallet - medium size, claw hammer - 500 gms (heavy duty), oil stone - carborundum universal- silicon carbide combination rough and fine, measuring tape - 3 meter, spring caliper (inside) - 150 mm, spring caliper (out side) - 150mm, trammel - 300 mm, rip saw - 600 mm, cross cut saw - 250 mm, key hole saw - 250mm, fret saw frame - 150 mm, compass saw -350 mm, gauge chisel,firmer - 6mm width (with handle), gauge chisel,firmer - 10mm width (with handle), gauge chisel,firmer - 12mm width (with handle), gauge chisel,firmer - 16mm width (with handle), gauge chisel,firmer - 20mm width (with handle), gauge chisel,scribing - 6mm width (with handle), gauge chisel,scribing - 10mm width (with handle), gauge chisel,scribing - 12mm width (with handle), gauge chisel,scribing - 16mm width (with handle), gauge chisel,scribing - 20mm width (with handle), ball pein hammer - 600 g (heavy duty), cross pein hammer - 600 g (heavy duty), screw driver- 450 mm (heavy duty), screw driver - 250 mm (heavy duty), screw driver - 150 mm (heavy duty), pincer -50 mm, file half round -2nd cut 250 mm (with handle), file half round - woode rasp bastard 300 mm (with handle), file slim taper - 100 mm (with handle), file slim taper - 150 mm (with handle), card file (steel) wire brush for file - 200 mm, hand drill - 6 mm capacities, country drill with bow (ball bearing -620 x 726 mm, ratchet brace - 250 mm sweep, hand auger - 10,12,14,16,18,20,22.25 mm, centre bits - 6,8,10,12, expansion bit set - 218 x171 mm, twist drill bits - 6,8,10,12 mm, counter sink bit rose type - 12 mm, breast drill - 6 mm capacity, centre punch - 5mm, snip straight - 200 mm (heavy duty), oil cans - 225 x 225 mm, compbination side cutting pliers - 250 x 250 mm (heavy duty), plunger saw set/pistil grip type - 300 x 300 mm, number punch - 12 mm, slip stone - 100 mm, round crow bar - with chisel and claw end 1070x25 mm, g clamp - 100mm, g clamp -150mm, t bar cramp - 0.6 meter (heavy duty), t bar cramp -1.25 meter (heavy duty), carpenter vice 250 mm jaws (professional) heavy duty, saw sharpening vice heavy duty, carvinng tools set, goggles pair, glass cuter, nail punch, surface plate - 600 x 600 mm, blower - electric type, grease gun, spanner double ended - set of 14 (heavy duty ), bench grinder - 200 mm d.e pedestal (heavy duty ), drilling machine - 12 mm capacities pedestel type (heavy duty ), portable electrical drill - 6mm capacity, drill chuck - 12 mm capacities, electric heater, connecting screwdriver 10 x 100 mm, neon tester 500v, screw driver set set of 7, insulated side cutting pliers 150mm, long nose pliers 150mm, soldering iron 25 watt, 240 volt, electrician knife 100 mm, tweezers 150 mm, digital m ultimeter (3 3/4 digit) ,4000 counts, soldering iron changeable bits 15 watt, 240 volt, de soldering pump electrical heated,manual operators 230v, 40w, steel rule graduated both in metric and english unit 300 mm,, precision set of screw drivers t5, t6, t7, tweezers bend tip, steel measuring tape 3 meter, tools makers vice 100mm (clamp), tools maker vice 50mm (clamp), crimping tool (pliers) 7 in 1, file flat bastard -200 mm, file flat second cut -200 mm, file flat smooth -200 mm, pl

Loading, Please wait...

Thyristor Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government