Latest tmt Tenders | Government tmt Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38552203

02 Jan, 2025 1.16 Crore

Lucknow - Uttar Pradesh

Tender For providing of custom bid for services - eddycurrent array testing of lhb wheel disc recording of wta nos of each wheel disc cleaning painting of lhb axles wheel discs cleaning of brake discs in wheel shop ultrasonic testing laboratory

Central Government/Public Sector

CTN :38604240

20 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of heavy duty high capacity for the toughest cut out apparatus. dimension 25 6x520x400 mm (w/l/h). no load speed 3800 rpm. disc diameter 352 mm .weight 18 kg. disc b ore 25.4 mm. input power 2400w. category subdivision metal cut-off saw. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38599156

27 Dec, 2024 94.20 Lacs

Jaisalmer - Rajasthan

Tender For supply of rcc cement pillar size 1.8 meter height including preparation of reinforcement, compaction, curing and putting f.d. mark on post (concrete mixture of 1 2 4 reinforcement of 4 iron rods with 4 rings of 6 mm tmt and providing 3 hooks of iron)

State Government

CTN :38557579

26 Dec, 2024 NA

Balaghat - Madhya Pradesh

Tender For building material - thanapsakpadah 2 inch pins iron bars tested iron/bars (pap danta j) 8 bars iron/bars (pap danta j) 10 bars iron/bars (pap danta jhd) 12 bds lappatma cement (chbp pap 1489/1991) 50 litres, 53 liters of sand per cubic meter. sand-clean as per standard, ballast 20 mm per cubic meter, ballast 40 mm. per cubic meter, stone dust (sajvadum knej) per cubic meter, murum hard per cubic meter, pottery size of baked brick 94 inch per thousand, brick (sal. i.t.b.) size (94) inch per thousand, sal/bija frame per square feet, palla door q1. 36'x70' feet 30 mm per piece board waterproof laminated, palla door q2. 29'x70' feet 30 mm per piece board waterproof laminated, pipe 1 inch c.p.v.c., l.p 20 feet per piece a pipe 1.5 inch c.p.v.c. 20 feet per piece a pipe two inch c.p.v.c. ? 20 feet per piece a pipe three inch c.p.v.c. 20 ft per piece a plastic water tank four layer 1000 litre per piece ppa plastic water tank four layer 500 litre per piece ppa plastic water tank 6 mm (2x2 ft) per sq. ft. double charge a granite per sq. ft. tata steel profile sheet 4x10 mm 25 gauge (0.5mm), tata steel profile sheet 4x12 mm 25 gauge (0.5mm), tata steel profile sheet 4x14 mm 25 gauge (0.5mm), tmt frame and counterfeiting parts, cement frame 36'x70' per piece, iron frame 36'x70' per piece paver block per piece

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

Central Government / Public Sector

CTN :38079631

23 Dec, 2024 NA

Panipat - Haryana

Tender For corrigendum : rathi make coupling spares - list of item(s) / work(s) as per tender documents, disc-o-flex cplg,em-25(250)i/ii assly, element blade pack;p/n:4, set of fasteners,p/n:2,3,6,8,9, complete cplg assy,em-8(140)-iii/iii, set of fasteners,p/n:2,3,6,8,9, disk pack , em8(140) iii/iii, spacer sub-assy, p/n:5, coupling complete-rrl-95/100, rubber spider,rrl 95 (100),make: rathi, coupling complete - l-100, coupling w/spacer,rrs 110, 100 mm, flexible element,rrs 110/100 assly, snap wrap f/coupling,rrs 110, coupling complete - l-095, rubber spider for l-095 coupling, coupling complete - l-075, lovejoy,comp. coupling,rem65(250) ii/i, flexible element assembly, p/n:7, set of fasteners,p/n:6,5,8,9, complete coupling rem-65(140)-iii/iii, flexible elements,p/n:4 rem-65(140),, set of fasteners,p/n:9,8,6,5, set of fasteners,p/n:9,8,6,5, flexible element assembly p/n:7, spacer sub-assy, p/n:4, set of fasteners,p/n:9,8,6,2, flexible element assembly, p/n:4, spacer sub-assy, p/n:5, flex. element,em8(200)-iii/iii,p/n:4, fastener set,em8(200)-iii/iii,pn:9,8,6,2, spacer sub-assy, em8(200)-iii/iii,p/n:5, flexible element assembly p/n:7, set of fasteners,p/n:9,8,6,5, spacer sub-assy, p/n:4, set of fasteners,p/n:6,5,8,9, flexible element assembly p/n:7, spacer sub-assy, p/n:4, set of fasteners,p/n:6,9,8,7, flexible element assembly, p/n:5, cplg assy,mdl:lmh-2500(180) i/i 5511, comp. coupling, rem 25(200) iii/iii, spacer sub assembley, p/n:4,rem 25(200), set of fastener,p/n:6,5,8,9, flexible element,p/n:7,rem 25(200) iii/i, coupling l-70, rubber spider,l-70,make: rathi, coupling w/spacer,rrs 095, 100mm, flexible element,rem-8 (iii-iv) 100, complete coupling ass em-8(140)iii/iv, comp. cplg, love joy, type & size : l075, comp cplg set ,em-25-180, cplg flexible rathi,m40/140i/ii, cplg flexiblerathi,lm170/250ii/ii, cplg flexible rathi,m125/180i/ii, cplgflexiblerathi,m4/140ii/ii, cplgflexiblerathi,m15/140i/ii, cplgflexiblerathi,lm55/140i/ii, cplgflexiblerathi,m90/180i/ii, cplg flexible rathi,m65/140i/ii, cplgflexiblerathi,m4/140iii/iv, cplgflexiblerathi,m8/100, flexible element lm 10/100 i/ii,rathi, complete coupling, lm-170(180) i/ii

State Government

CTN :38556686

30 Dec, 2024 1.77 Crore

Thiruvananthapuram - Kerala

Tender For supply of 11kv45kn composite polymer disc insulator

Central Government/Public Sector

CTN :38605305

20 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of 6 inches 6 hole velco disc grit 220 size for pneumatic ro sander. make :- indasa or taparia o r aloxide velco or nepolian or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604378

23 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of centering disc for lhb coaches as per rcf drg. no. 1268599, ver. 01r, confo rming to mdts-166, rev. 02." [ warranty period: 30 months after the date of delivery ]

Tmt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors