Latest toll gate Tenders | Government toll gate Tenders

Co-operative

CTN :41302605

16 Aug, 2025 NA

Patna - Bihar

Tender For civil construction works for fixing kota stone in ghee section at feeder balancing dairy, patna

State Government

CTN :41308147

12 Aug, 2025 89.3 Thousand

Kasaragod - Kerala

Tender For kiifb construction of madakkal bridge across valiyaparamba backwater in kasaragod district fixing boundary stone of standard design including survey work general civil work

State Government

CTN :41308186

12 Aug, 2025 77.1 Thousand

Kasaragod - Kerala

Tender For k i i f b construction of n s t r u c t i o n o f thekkekadu bridge across kavvayi river and approach road in kasaragod district fixing boundary stone of standard design including survey work general civil work

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

CTN :41306947

22 Aug, 2025 22.49 Lacs

Kanpur - Uttar Pradesh

Tender For supply of floor tiles , wall tiles , electrical work , windows , door or mesh door , renovation of kitchen , renovation of toilets and bathrooms , white cement based putty and distempering , painting including priming coat of exterior primer applied , renovation of wardrobe , civil or masonary work , misc work , providing and fixing 18 mm pre polished granite for stair case , providing edge moulding to 18 mm thick marble stone counters

CTN :41272511

11 Aug, 2025 7.74 Lacs

Savanur - Karnataka

Tender For supply of nrlm shed matirials for huralikuppi grama panchayath savanur taluk haveri dist - display board or cib_sv nrlm, lumpsum material_sv nrlm, labour charges for handing errection of rcc rings etc. at 5 percentage_sv nrlm, transportation charges of materials beyond 5 km at 10 percentage_sv nrlm, fabrication charges._sv nrlm, cost of 6.5mm m.s. coil_sv nrlm, bib cock 20mm nominal bore_sv nrlm, polythylene pipes high density 32mm external dia_sv nrlm, add 5 percentage for fitingsand wastage charges_sv nrlm, pvc pipe of 4kg cum,75 mm_sv nrlm, pvc pipe of 6kg cum,63 mm_sv nrlm, pvc pipe of 10kg cum,110 mm_sv nrlm, handling loading and unloading 3 percentage on material_sv nrlm, labour charges for lifting and placing in position and making connection at 7% on material_sv nrlm, polyenthylene water storage tank of specified capacity l_sv nrlm, licenced plumber with tools_sv nrlm, lead or pvc connection pipe 32mm dia (for wash basin)_sv nrlm, c.i. or m.s. brackets for flushing cistern_sv nrlm, brass stop cock_sv nrlm, cp brass waste 32 mm of standard pattern_sv nrlm, cp brass chain with plug_sv nrlm, copper plated brass piller tap 15mm_sv nrlm, white vitreous china clay flat back wash basin size 550x400mm_sv nrlm, s or p trap 100mm_sv nrlm, indian type water closet of size 580 mm of specified make with footrests_sv nrlm, add white cement for pointing at 2 percentage on material_sv nrlm, border tiles 30 x 10 cms_sv nrlm, glazed tiles 300x450_sv nrlm, ceramic tiles 30 x 30 cms_sv nrlm, vitrfied tiles 600x600 mm_sv nrlm, add brush, putty, sand paper at 2 percentage on cost of paint_sv nrlm, water proofing cement paint_sv nrlm, distemper primer_sv nrlm, whitening_sv nrlm, dry distemper_sv nrlm, lime_sv nrlm, add providing and removing scaffolding at 3 percentage on labour_sv nrlm, painter class i_sv nrlm, add_sv nrlm, welder grade i_sv nrlm, fitter class i_sv nrlm, z section_sv nrlm, reeded glass 2 mm thick_sv nrlm, tw beading for fixing glass_sv nrlm, stays_sv nrlm, hinges 5 heavy duty_sv nrlm, handles_sv nrlm, ms clamps_sv nrlm, mullion section_sv nrlm, t section_sv nrlm, honnewood planks for panels 20 mm thick_sv nrlm, honne wood_sv nrlm, unit cost as per the specificatin_sv nrlm, add cutting and other wastage 5 percentage_sv nrlm, mathi or nandi wood planks for panels 25 mm thick_sv nrlm, binding wire_sv nrlm, tmt bars fe 500_sv nrlm, casurina poles 75 to 100 mm dia_sv nrlm, mason class i (with tools)_sv nrlm, solid concrete block (40x15x20 cms) 5.00 n or sqmm_sv nrlm, burnt bricks class 35 (non modular)_sv nrlm, add watering charges at 1 percentage on labour_sv nrlm, add handling , loading and unloading at 2 percentage on material_sv nrlm, casurina poles 100 to 150 mm_sv nrlm, silver oak or equivalent planks 38 mm thick_sv nrlm, jungle wood runners and planks_sv nrlm, mixer (concrete small used in culvert)_sv nrlm, boulders_sv nrlm, bond stone 20 x 20 x 45 cm_sv nrlm, size stone 20 x 20 x 25 cms_sv nrlm, hom of vibrator 0.71 days_sv nrlm, plasticizer or super plasticizer_sv nrlm, formwork, centering and scaffolding for columns and piers_sv nrlm, add watering charges at 1 percentage on material_sv nrlm, mixer (concrete) 1 cum capacity_sv nrlm, portland cement_sv nrlm, coarse sand (zone iii)_sv nrlm, broken stone aggregate 12 mm to 10 mm size_sv nrlm, broken stone aggregate 20 mm size_sv nrlm, broken stone aggregate 40 mm size_sv nrlm

CTN :40728577

04 Aug, 2025 NA

Shopian - Jammu And Kashmir

Tender For bid to ras supply of earth work in bulk excavation by mechanical , supplying and laying of quarry stone soling hand packed tightly , providing and laying in position cement concrete of specified grade , providing and laying in position specified grade , centring and shuttering including strutting propping etc , steel reinforcement for r c c work , providing and fixing of premium rock climbing holds multi coloured , providing and fixing of anchor bolt of required size and length , providing of rock climbing harness , providing of painting and finishing etc using weather proof paint , providing for site development and contengiences etc

CTN :38924592

22 Aug, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :41272076

08 Aug, 2025 6.69 Lacs

Kavaratti - Lakshadweep

Tender For construction of segregation shed with material recovery facility centre for plastic waste management at agatti (re tender-i) - surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, providing and laying cement concrete 1:4:8 ( 1 cement: 4 river sand: 8 granite chips ) foundation and plinth., providing and laying cement concrete block (machine moulded) masonry in in foundation and plinth in cm 1:6 with blocks of size 40cmx20cmx15cm, providing and laying half block masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 metal sand ) cement concrete block of size 40cmx10cmx15cm, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand), providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer g.i.pipe, steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing aluminium sheet roofing fixed with galvnized iron jor l hooks and 8mm dia c.i plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick., cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc.complete a) 40mm thick with 20 mm nominal size stone aggregate, providing ridges or hips in aluminium sheet roofing with g.i /j or l hooks bolts and nuts 8 mm dia g.i plain bitumen washers complete. 0.56mm thick., providing and fixing m.s welded mesh 50mmx50mm in position and applying a priming coat of approved steel primer with all necessary nails

State Government

CTN :41288272

16 Aug, 2025 NA

Amravati - Maharashtra

Tender For supply of and supplying and installing king size double bed of size 2.05 x 1.80 x 0.40 mtr made from 18 mm thick commercial plywood , supplying of side table of size 0.60 x 0.45 x 0.35 mtr. structure made out of 18 mm thick commercial plywood , providing and fixing in position 12 mm thick cleared toughened glass partition including crystal edge polish fixed in glass profile channel , supplying of bonded foam mattresses of size 1.80 x 2.00 x 0.12 mtr made from bonded foam of 100 mm having 80 density , providing and fixing officers table having 0.75 mtr height made out of 18 mm thick commercial grade plywood , providing and fixing back or side runner of 0.75 mtr. height, structure made from 18 mm thick commercial plywood , providing and fixing signages of various size as per design of white or brown 6 mm imported acrylic sheet , providing and fixing 6 mm thick commercial grade plywood on existing surface with favicol and nails , supplying and providing single seater sofa made out of seasoned nonteak wood str. covered with 75 mm thick high density foam , supplying and providing two seater sofa made out of seasoned nonteak wood str. covered with 75 mm thick high density foam , supplying and providing three seater sofa made out of seasoned nonteak wood str. covered with 75 mm thick high density foam , supplying and providing centre table of size 0.55 x 1.05 x 0.45 mtr. all structure made out of 18 mm thick commercial plywood of approved quality , supplying and providing dinning table made from seasoned indian teak wood structure , supplying and providing dinning chair made from seasoned indian teak wood with melamine polish, cushion seat , supplying and providing dinning table made from seasonproviding and fixing artificial granite in 18 to 20 mm thickness , providing glass etching that creates permanent designs on glass surfaces by removing a layer of the glass , providing and fixing decorative curtain rod in steel pipe of 202 grade of 3or4 with decorative stainless steel finish decorative ends , providing and fixing curtain in attractive shape and pattern in standard width of cloth of 1200 mm with sitching , supplying of stype chair mid back with m.s capsule pipe frame of 16 guage structure with powder coating , providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. , providing and applying priming coat on concreteormasonaryorasbestos cement plastered surfaces including scaffolding , providing and applying pearlorluster finish paint of approved colour and shade to the existing plaster surface , providing and fixing wooden fluted designer pvc interlocking panel having thickness 10 or 12 mm , kitchen trolley providing and fixing stainless steel kitchen trolley of overall 26 inch height and 22inch depth , providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator , providing and fixing stone polymer composite limestone flooring 4 mm thick having strips size 230 mm x 1200 mm mouldable enabling , providing and fixing of glass door with 12 mm thick toughened glass with all fitting like floor spring of cnr , supplying of single bed in attractive shape and pattern of size 2.05 x 0.90 x 0.40 mtr. made from 18 mm thick commercial plywood , supplying and providing bonded foam mattresses of size 0.90 x 2.00 x 0.10 mtr made from 80 mm thick bonded foam , tea table 900mm x 750mm x 450mm form.s. ante chamber providing and fixing of tea table 900mm x 750mm x 450mm , providing visitors four legs chair medium back chair structure made from //bid details 2 / 37 m.s.capsule pipe of 16 guage thickness , providing and fixing meeting hall table of height 0.75 mtr by using commercial 18 mm thick plywood , providing and arrangemnt of mid back, normal syncro mechanism, fixed armrest, gaslift , providing and arrangemnt of high back, synchronized mechanism with multiple locking , providing and fixing in p

Toll Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

State Government

Corporations And Associations And Others

State Government