Latest touch panel Tenders | Government touch panel Tenders

Central Government/Public Sector

CTN :41502759

30 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of audio video conferencing room setup : : - display , ptz camera , cable cubby , switcher , wireless presentation , mini-pc , microphones , audio processor , amplifier , loudspeakers , controller , touch panel , controllable pdu , poe switch , lan wan load balancer , wireless access point , equipment rack , cables and connectors , programming charges , one-time installation charges

CTN :41487885

29 Aug, 2025 NA

Panchkula - Haryana

Tender For supply of touch panel with andriod

CTN :40973775

21 Aug, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of indoor led wall 9 x 6.6 ft with 8 input quad mode , display wall controller with 15.6 inch table top touch panel and touch panel stand , display wall processor , output switcher , l2 switch , 75 inch side display , audio amplifier , ceiling speaker , monitor speaker , integrated tile mic , wired handle mic , ups 15 kva online , utp lan cable , rj 45 connector , hdmi cables , creation of facade for indoor led wall led screen side display brackets for all items , vertical hand screen dispenser system size 9x7 ft including installation , visualizer , multimedia projector , desktop computer

CTN :41445881

05 Sep, 2025 NA

Delhi - Delhi

Tender For tender for supply of sitc of 4k codec video conferencing , sitc of 4k uhd 2160p ptz camera 12x optical zoom , sitc of touch panel display 10inch or , sitc of ip table microphone array , sitc of active optical usb 3.1 cable , sitc of led display 65 inch , sitc of led display 43 inch , sitc of hdmi cables as required

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

CTN :40812976

13 Aug, 2025 NA

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of establishment of int and decision support centre - main curved display 31 feet x 7.86 feet data wall , kvm over ip multi source receiver , kvm manager with 25 device licenses , transmitter , network switch 48 port , touch panel , installation and commissioning

State Government

CTN :41325017

19 Aug, 2025 1.28 Crore

Gandhinagar - Gujarat

Tender For sabarmati -gandhinagar- balva- gojariya- vasai- kada- visnagar road ( vasai- dabhala chokadi to visnagar ) [sh.71] km.41/200 to 56/500 dist. mehsana ( anti- glare screen leaf shape ) ( second attempt )

State Government

CTN :41304598

25 Aug, 2025 NA

Rewa - Madhya Pradesh

Tender For supply of pm usha uv- visual spectro photometer (tauris) - uv visual spectro-photometer specifications for uv visual spectro-photometer qty 01uv visual spectro- photometer (tauris) softwareonly labsolutions uv mentionedadd compatibility with open or third-party software (e.g., uv probe, uvwin)displaycolor touch panel with stylus not essentialrecommend capacitive touch or pc-only control scan speed29,000 nm/min without standard modesclarify scan speed modes like kinetic/fast/slowoptical systemno lamp detailsinclude d2 + tungsten dual lamp bandwidthonly 1 nmadd optional 0.5/1/2 nm if availableconnectivityno usb, rs232, ethernetadd pc connectivity, data export optionsaccessoriesno cuvette holder/cuvettesinclude 4-position holder and 4 quartz cuvetteswarrantynot specifiedminimum 5-year on-site warranty-wavelength range: 190 to 1100 nm-bandwidth: fixed 1 nm or switchable (0.5/1/2 nm)-wavelength accuracy: 0.1 nm (at 656.1 nm), 0.3 nm (entire range)wavelength repeatability: 0.1 nmphotometric range: -4 to +4 abs, 0 to 400%tphotometric accuracy: 0.002 abs @ 0.5 absphotometric repeatability: 0.0002 absnoise level: 0.00005 absbaseline flatness: 0.0006 abslight source: deuterium (d2) + tungsten lampsoptics: true double beam with czerny-turner configurationscan speed: up to 29,000 nm/min with kinetic scan option.software: pc-controlled with labsolutions uv or compatible software; windows osdisplay: optional built-in touch panel or pc controlaccessories: 4-position cell holder, 4 quartz cuvettes, usb/lan ports warranty: minimum 5 years on-site, as well as service from time to timethis specification has been covered in detail in a previously issued document.

CTN :41024886

21 Aug, 2025 NA

Jamnagar - Gujarat

Tender For development of indigenous multiship generic apms trainer - overall hardware and software design, supply of workstation with 27 inch monitor (for trainees), supply of defect simulation tablet (for instructors), touch panel scree size- 55inch (for display of switchboard with touch functionality), development of emulator and apms module, stw and commissioning of the system at ins valsura., integration of all components with proper routing of cables., power supply points to be provided by bidder for modules., ups for entire system with backup time of 30 min to be provided with system., air conditioning unit of 02 ton to be supplied along with installation., the touch display must have zoom in and out facility., all relevant ports for audio and video must be present in all units., audio warning must be available with system. separate speaker to be provided., all relevant documents to be provided., minimum warranty of 03 yrs must be provided, imparting training to trainers at ins valsura for 03 days.

Touch Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government