Get complete information related to latest Track Material Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Track Material Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Track Material Tenders.
Tender For supply of adjuster ear with ear bushing for slack adjuster type irsa 600 to drg.no. wd-82064/s-10 rc alt 12 , item 1 & 6 and to spec. no . 07-abr-92, amendment.no.5 of sep.2016 [ warranty period: 36 months after the date of delivery ]
Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway trackmaterial): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0
Tender For supply of 52/72-5 kv-oip bushing ject - item no. 1: 52/72kv top terminas to drg 35380401213# 02 rev00 and as per spec. aa12023 rev08. pvc ra , item no. 2: 145kv top termials to drg 35380401085# 01 rev01 and as per spec. aa12023 rev08. pvc rati
Tender For tender for supply of casting - seal assembly (hy-914.00) - fully m/cd and assembled seal assly as per drg. 26118802143/02 with matl as per specn. astm b-584 alloy gr. 86300 (hardness 200-220 bhn) , oil pump bushing (hy-172.0) - fully m/cd bronze casting as per drg. 26117600002/04 with matl as per specn. aa19939/02 , packing gland (hy-167.01.11) - fully m/cd bronze casting as per drg. 36148000348/02 with matl as per specn. aa19939/02 , packing gland hy 167 01 13 fully mcd bronze casting as per drg 36148000350 04 with matl as per specn aa19939 02 , packing gland (hy-182.03) -- fully m/cd item as per drg. 36157600098 rev.01 with matl. as per specn. aa19939/02 , sleeve bearing d76.37x62.5x76 l as per drg. a-644 rev.02 with material aa19913/02.
Tender For tender for supply of keeper plate (hy-924.17) as per drg. 46118802055/01 with matl as per specn. aa10108/11 , welded plug (hy-204.06) - as per drg. 46116200749/04 with matl as per specn. aa10111/06 , thrust housing cover (w.shaft) var-01 as per drg. 36117600007/09 with matl. as per specn. aa10119/15 , pipe spacer (hy-045.08) - as per drg. no. 46127600059/04 with matl. as per specn. aa10152/07 , bull ring retainer (hy 356 05) as per drg 46119600371 01 with matl as per specn. hy10199/03 , deflector link lever var-03 as per drg. 36139600305/04 with matl. as per sepcn. aa10119/15 , oil pump keeper (hy-170) - fully m/cd item as per drg. 46117600002/01 with matl as per specn. aa10119/15 , bearing spacer (hy-358.00) - as per drg. 36100000666/03 with matl as per specn. aa10119/15 , brg. sleeve (hy-102.00) - fully m/cd item as per drg. 46137600121/00 with matl. as per specn. aa10119/15 , spring adj. bolt seat (hy-103.00) - fully m/cd item as per drg. 36137600072/02 with matl. as per specn. aa10119/15 , trunion bushing ret. (hy-903.05) -- as per drg. 36108802024/02 with matl. as per specn. aa10119/15 , modified hinge gate and hinge blade (hy-504.04.b) as per drg. 16515600070/01 with matl as per drg. , brg. guard l nut hy-040 00 fully mcd item as per drg 36137600081 01 with matl as per specn aa10119 15 , taper pin dia 26x255 (hy-206.03) as per drg. 46137600119/01 with matl as per specn. aa10208/07 , bowl hub key (hy-178.0) - fully m/cd key as per drg. 46117600030/02 with matl. en-9 , hinge gate shaft (hy-504.17) as per drg no 36515600176/02 with material as per drg.
Tender For supply of running contract (rgc) for procurement of 60/84/100 mva, 132/2*55 kv scott connec ted traction power transformer with bushing ct as per rdso specification for 2*25 kv at feeding sy stem conforming to indian railways specifications (read along with latest amendments) for railway electrification projects. (the item is to be delivered in sections as per bid document)) ]
Tender For supply of adjuster ear with bushing for slack adjuster type irsa - 6ooj for bobyn wagon to r dso's drg. no. wd-9ooo2-s-o2-rc, item no.1 & 4, alt no.1 and rdso's spec no. 07-abr-92 with 5 a mendments. last amendment no. 5 issued on sept'2016. . [ warranty period: 36 months after the d ate of delivery ]
Tender For corrigendum : supply of crfq 1000433225 procurement of itt make pump spare at bpcl m r - 31.20.00.001.5 - shaft item no 122 itt pumps , 31.20.00.004.5 - impeller item no 101 itt pumps , 31.20.00.005.5 - seal laby otb item no 123a itt , 31.20.00.006.5 - seal laby inb item no 123 itt , 31.20.00.007.5 - fan thrust item no 1023e itt , 31.20.00.008.5 - key sq. end item no 178 itt , 31.20.00.009.5 - locknut washer item no 178 136 itt , 31.20.00.010.5 - gasket casing item no 351 itt , 31.20.00.011.5 - screw impeller item no 198 itt , 31.20.00.012.5 - ring oil item no 114 itt , 31.20.00.013.5 - bushing stuffing box item no 125 itt , 31.20.00.014.5 - o ring item no 4122 itt , 31.20.00.015.5 - shim thst end cover item no 390c itt , 31.20.00.016.5 - spacer impeller item no 443a itt , 31.20.13.065.5 - casing gasket itt , 31.20.13.066.5 - o-ring itt , 31.20.13.068.5 - throat busing itt , 31.20.23.241.5 - gasket casing pn 351 itt corp a01045a04 , 31.20.28.074.5 - o-ring itt , 31.20.79.106.5 - casing gasket pn 351 itt corp a01045a04 , 31.20.79.126.5 - gskt radial end cover itt a00046a045130 , 31.20.87.004.5 - impeller spacer itt , 31.20.87.005.5 - casing gasket itt , 31.20.91.106.5 - outer gasket casing itt corp a01302a62 , 31.20.91.107.5 - inner gskt case 351c itt corp a01302a61 , 31.20.91.651.5 - wear ring imp itt corp d07616a40 2446h