Latest traction system Tenders | Government traction system Tenders

Central Government / Public Sector

CTN :41673696

03 Oct, 2025 NA

Mancheshwar - Odisha

Tender For corrigendum : supply of galvanized steel stranded wire traction bonds with logs duly crimped at both ends for 25kv ac traction system.

Central Government / Public Sector

CTN :41349882

29 Sep, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : design verification, detail engineering, manufacture, supply, installation, testing and commissioning of 750 v dc third rail traction system electrification and auxiliary sub stations (ass) and associated scada systems for phase 2 of kmrl project.

CTN :41727644

16 Sep, 2025 NA

Nagpur - Maharashtra

Tender For ohe modification work for up-gradation of existing 1x25kv electric traction system to 2x25 kv at feeding system in pox-amf section in nagpur division of centrai railway to meet 3000 mt loading target of central railway to meet 3000 mt loading target.

CTN :41289695

11 Sep, 2025 8.89 Lacs

Darjeeling - West Bengal

Tender For bid to ras supply of air craft model akash missile system equipment model and air maintenance model d d - an32 aircraft table top model 12 inch , 3d display model of flr, 3d car, fcc, tlv size-12 inch each , 3d display model of akash air force launcher aafl size-24 inch each , air craft model of mi 17 v5 helicopter in air maintenance configuration with hooks and strings for hanging size- 4.5 feet , miniature model of load with 3 parachutes attached size-8 inch , name board for model in stainless steel size- 6 inchx 18 inch , photo printing and framing size-20x30 inch , ceiling track light with 01 meter track , photo printing and framing with backlit lighting , unit crest in stainless steel size-3x2 feet , table top 3d model of mountaneous terrain with markings , sand and clay model of siliguri corridor in composite fiber material size- 6x6 feet , 3d display model of flr, 3d car, fcc, tlv size-18 inch each , 3d display model of akash air force launcher aafl size-18 inch each , cheetah helicopter model pointer with handle incomposite material size-18 inch , chetak helicopter model pointer with handle incomposite material size-18 inch , chetak helicopter model with chilling fitting attachment size- 5 feet ) /bid number : gem/2025/b/6385356 * /dated: 01-08-2025 & & / bid document 1 / 17

State Government

CTN :41365007

15 Sep, 2025 NA

Phaltan - Maharashtra

Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te

State Government

CTN :41672726

09 Sep, 2025 55.19 Lacs

Raichur - Karnataka

Tender For name of the work major overhauling of 02 nos kt1150 engines and 01 novt28 l engine cummin s make of san locomotives assisting for dismantling of kt1150 and vt28 l engines from the locomotives joint inspection of testing of overhauled engines shall be conducted between kpcl representative and firms representative joint inspection report of testing jirt after completion of re assembly shall be furnished to this office joint inspection of testing may be waived off at the discretion of the undersigned but the test report shall be furnished.removal and re installation of engine. this includes the complete procedure of safely removing the engine from the locomotive and, after completion of the necessary repair or overhaul work, re-mounting the engine back into the locomotive. all required tools, fixtures, lifting mechanisms, and safety measures shall be managed by the vendor.engine alignment process the alignment process involves precise positioning and securing of the engine to ensure correct interfacing with the locomotives drivetrain coupling systems, and support structures this includes, but is not limited to mounting of the engine onto the engine bed frame using proper alignment tools and calibrated instruments ensuring parallelism and angular alignment of the engine relative to the transmission or traction system verifying coupling concentricity and ensuring there is no misalignment that may lead to premature wear vibration or operational issues tightening of mounting bolts to specified torque values and rechecking alignment post tightening conducting necessary trial runs and adjustments if any to confirm proper functionality before final handover all the released items shall be returned in separate packing along with overhauled engines to kpcl

Central Government/Public Sector

CTN :41682153

26 Sep, 2025 NA

Amritsar - Punjab

Tender For design, supply, erection, testing and commissioning of feeder work for upgradation of existing 1x25 kv electric traction system into 2x25 kv electric traction system in between sanehwal-jalandhar-amritsar section of firozpur division of northern railway (164 rkm/328 tkm).

CTN :41702968

15 Sep, 2025 NA

Bokaro - Jharkhand

Tender For repairing of both sprocket segment oval hole making by material filling, track chain cutting and fitting and tilt cylinder mounting hole making, dismantling and fitting of dozer 13781.

Central Government And Public Sector

CTN :41637915

19 Sep, 2025 NA

Bilaspur - Chhattisgarh

Tender For design, supply, erection, testing and commissioning for up gradation of existing 1x25 kv electric traction system into 2 x 25 kv at feeder system between bsp - tld including bsp yard and other yards in section (74 rkm/ 227 tkm) of bilaspur/ raipur division over s e c railway.

Central Government And Public Sector

CTN :41638064

23 Sep, 2025 NA

Bilaspur - Chhattisgarh

Tender For design, supply, erection, testing and commissioning for up gradation of existing 1x25 kv electric traction system into 2x25 kv electric traction system in between rig - jsg section (including all yards) of bilaspur division over secr (70 rkm/ 280 tkm)

Traction System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector