Latest train spares Tenders | Government train spares Tenders

Central Government/Public Sector

CTN :36275171

14 Jun, 2024 NA

Erode - Tamil Nadu

Tender For supply of axle box housing finished with grease nipple (without bearing) for wap1 a nd wap4 locos as per clw drg.no.03/1/11/50 alt-2 or to nei drg. no. x-122 alt-k or fag drg. no.901-26-102/a3. top portion height of the axle box to be maintained 17m from spring seat location as per modification sheet no.mp.mod.vl.03.05 (rev.00). [ warranty period: 30 months after the date of delivery ] amm/elsd/erode, sr

CTN :36000853

27 May, 2024 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply and installation of security surveillance supply and installation of 5 mp high quality ptz cctv camera equipment with all required accessories for surveillance , anpr number recognition cameras with driver libraries , 32 chanel 8 sata nvr recording system with power supply etc. , ip keyboard controller joy stick , artificial intelligence ai software for people counting and face recognition, license with server , 8 tb hard disk , cctv video display system 55 inches with hdmi vga inputs and smart android system , video management software , 8 port poe switch with sfp port , 8-port gigabit managed switch with 2 sfp port , poe switch rack with accessories extension box weatherproof pole mount , sfp module , ofc armored outdoor single mode 6 core - os2 single tube fiber protection tube with petroleum jelly fibre cable , cat 6 stp outdoor with ant rodent protection cable transmission frequency of 250 mhz minimum, cable should be 4 pair. , idc field termination connector ip-20 rated at camera side , 2 core wire 1.5 mm sq 300 mtr armored , pvc pipe, conduit and other accessories charges as per actual consumed , isi mark 30 mm hdpe pipe with jointer for fiber , pvc box heavy 5x5 inch , network rack 9 u loaded for nvr , laying of hdpe pipe with soft soil digging up to 2ft including the repair of same. , laying of fiber charges underground from pole to pole, fiber termination, etc , laying of cat6 cable antirodent utp , laying of conduit pipe heavy duty 1 inch pvc conduit with accessories like gatti, clamp, bend etc. steel support wire for wire poller overhead cable , installation of camera with termination of cat6with field termination connector and housing fixing , installation of pole mount or wall mount rack including accessories with switch installation , power backup system with 5kva ups , 32 chanel 1 sata nvr for 2nd location display , server for video management software , 2nd year amc cost , 3rd year amc cost

Central Government/Public Sector

CTN :36223923

04 Jun, 2024 NA

Barauni - Bihar

Tender For supply, installation and commissioning of hot box detector (hbd) at khagaria (up line) teghara ( dn line) of see division (one set in each location) as per attached technical annexure. make:- any reputed ma ke. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :36177849

23 May, 2024 23.72 Lacs

Raebareli - Uttar Pradesh

Tender For providing of custom bid for services - 200134226 maintenance contract of ci systems and equipments for fgd area at ntpcunchahar stage4 for one year- 10) maintenance contract of c&i systems and equipments for fgd area at ntpc-unchahar stage-4. 10.10 item service code no.: cipna00gn400 desc:- removal & remounting of pneumatic actuator(diaphragm type or power cylinder type) will consists of any combination of following activities: 1. removal of pneumatic connections and required instruments like solenoid valve, limit switch, afr, positioner, pft etc from actuator and decoupling from valve after ensuring proper isolation from process side. 2. removal of actuator from its position. 3. transportation of actuator from its location to a safe place. 4. remounting the actuator after clearance from mechanical maintenance. 5. re-fixing /replacing the related accessories removed earlier as per point no-1 above and restoring pneumatic connections including cable dressing, copper tubing, tagging etc. 6. final operation checking from local & control room (fgd ddcmis system) after calibration and feedback adjustment. defect liability period: 01 week 10.20 item service code: - cipna00gn106 des:- checking/pm of pneumatic control system pneumatic actuator (diaphragm type or power cylinder type) and its mounted accessories, will consists of any combination of following activities: a) checking/pm of solenoid valves mounted on pneu. act. i. check solenoid coil physical and electrical healthiness and tightness of terminals if required ii. clean its external parts. iii. check & adjust air supply pressure as per requirement iv. check tightness checking of all parts. v. energize with correct voltage and see solenoid valve operation if required as per instruction of area in charge. vi. if solenoid valve is not working or coil resistance is not adequate replace solenoid valve or coil and check operation. vii. tighten checking of wires at terminals & at junction boxes. b) checking/pm of positioner and position feedback transmitter mounted on pneu. act. i. check & adjust supply pressure as per requirement. ii. clean its external parts of positioner and check its operation, if necessary, as per instruction of area in charge. iii. if required, connect pneumatic test signal at i/p, 0.2 kg/cm2. adjust positioner zero adjustment spring, till actuator comes to zero position. adjust 4ma o/p of pft with zero pot. iv. raise pneumatic test signal to 1.0 kg/cm2 and adjust span of positioner, till actuator reaches 100% position. adjust 20ma o/p of pft with span pot. v. repeat steps ii to iv till the required repeatability is achieved. vi. tighten terminals at junction boxes. c) removal and restoration of c&i connections as per requirement during unit shutdown or as per requirement. i. removal of accessories like solenoid valves, positioner, i/p converter, air lock relay, air filter, air filter regulator, limit switch, position feedback transmitter, volume booster, pneumatic lines, etc. ii. keeping all accessories safely at suitable location. iii. restoration of all accessories removed and connection of air lines as per original scheme. iv. checking of functioning of actuator after restoration of connection. v. calibration / adjustment of complete system if required. d) checking/pm of i/p converter/smart positioners if any i. adjust supply pressure as per requirement. ii. check ma input to i/p converter/smart positioner. iii. check i/p converter/smart positioner o/p with portable gauge. it should correspond to its characteristic, if not, remove it and send to c&i lab for calibration/repair. iv. bring i/p converter/smart positioner from c&i lab and fit it in line. v. connect ma signal and normalize the system. vi. tighten terminals at junction box. e) checking/pm of regulating type actuator operation. i. check and adjust supply air pressure as per requirement of respective actuator. ii. set demand to 0% from control room after taking p

Central Government/Public Sector

CTN :36177342

21 Jun, 2024 NA

Lucknow - Uttar Pradesh

Tender For hiring of light commercial vehicle (22 feet / 23 feet, 8-10t capacity) for shifting of instrumented wheel sets (iws) in boxes (box size 3.15m x 1.3m x 1.4m) from rdso, lucknow to the test site (any location over indian railways) & back (after completion of trial) for three years on a call basis

CTN :36020022

18 May, 2024 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply of enhancement of range of hhrs sets using tethereddrones - tethered drone complete set , winch mechanism alongwithground power converter box having atleast 110 meter cable, customised attachment for mounting communicationrepeater station as payload , ground based power source to support minimum six hours endurance , drone batterycharger , ruggedised transportation box , tool set forinsitu repairs , installation and commisioning alongwith 07days training at user defined location

CTN :36166573

16 May, 2024 NA

Kolkata - West Bengal

Tender For supply of tentative location of guard box. 20 gauge crca sheet (is 513 of 2008), duty painted, having one half as cupboard and other half as drawer usage both having universal lock and hook facility. size-15"l * 18"d* 11"h [ warranty period: 30 months after the dat e of delivery ]

CTN :36158930

16 May, 2024 NA

Srinagar - Jammu And Kashmir

Tender For requirement of electric items with installation at different location manigam to holy cave for shri amarnath ji yatra 2024 - wire 1.5 mm per roll, wire 5 mm per roll, wire 7 mm, top 6a, top 15 a, emperial card, lead gutt, hander panterial, gou box 2 inch, gou box 1 inch, led lump 9 vat, holder, 3 pin 6 ampire, tap per roll, bed switch

Central Government/Public Sector

CTN :36119996

21 May, 2024 NA

Mumbai - Maharashtra

Tender For door for post box size s.s.location box as per drg no - wplb - 02 of door. one set= 2 nos sam ple to be got approved before bulk supply. party should submit test certificate from nabl lab for material.(shop no.10) [ warranty period: 30 months after the date of delivery ]

CTN :36115096

21 May, 2024 NA

Bhagalpur - Bihar

Tender For electrical work in c/w "hot axle box detectors (habd) in connection of m&p programme of 2023-24. location: malda- 01 set, bhagalpur- 02 set, hansdiha- 01 set, godda- 02 set & barahat- 01 set."

Train Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector