Latest tube condenser Tenders | Government tube condenser Tenders

corporations/Associations/Others

CTN :42413607

27 Oct, 2025 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap e-waste (pcb category),scrap sheared body scrap (h),scrap leaf spring,scrap automotive seats,scrap fabric,scrap motor,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,scrap defaced engine (4w),scrap plastic (pcb category),scrap plastic (head/tail lights) (pcb category),scrap compressor,scrap catalytic converter empty,scrap rubber-pcb category,scrap dismantled engine scrap (4w),scrap chassis scrap,scrap radiator and condenser,scrap alloy wheel,scrap wiring harness,scrap nut bolt,scrap aluminium piping with rubber,scrap sheared body (2w)-without tyre, rim, battery, engine,scrap defaced cng/lpg cylinder,scrap battery bulk (pcb category),scrap alternator/ starter,defaced engine scrap (2w),scrap tyres with and without rim (4w),scrap catalytic converter

CTN :41713533

30 Oct, 2025 NA

Pondicherry - Pondicherry

Tender For corrigendum : supply of machineries and equipment to restore the existing ice plant at pattinacherry, karaikal on turnkey basis - ammonia compressor (25tpd): make: frick india, model: vilter 452xl with fly wheel, motor pulley, pressure gauges, tool kit, service kit, shutoff valves for suction, discharge line, compressor bolt & nuts, base frame, belt with guard and gasket set. hydrostatic test pressure: 28.17 kg/cm2max. allowable working pressure: 19.27 kg/cm2rotation speed max/min.1200/600rpm., compressor motor: make: kirloskar squirrel cage induction motor/40hp/3phase/1440rpm with moveable belt arrangement and stud bolt & nuts., condenser motor with pump: kirloskar make, 5hp/3phase., sump motor: 2hp motor with pump, shutoff valve: super make of size 1 ammonia valve to be fitted in atc., can dog with electrical winch: electrical winch with motor for hoist in a single can capacity, electrical panels: 60hp capacity (compressor motor 40hp, agitator motor 5hp, condenser motor 5hp, sump motor 2hp, ice crusher 3hp)., electrical wiring: building full wiring, switches, lights, condenser motor, sump motor, starter and machineries are to be connected., wooden lids: 480nos. (16x30) ice cans with cooling coil are to be covered by wooden lids and frames made out of vagai wood, sintex tank of 10000 litres, sump motor 2hp, water line, oht to brine tank to be provided., common salt, ammonia gas, refrigeration grade oil, ice crusher: ice crusher with 3hp motor for crushing of 50kgs ice bar., ice cans: cans to be painted by primer and aluminium paint.

CTN :42405010

04 Nov, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of eh8015d-502-10-043-21 pressure safety valve for condenser receiver,eh8015d 502-10 043-37 globe valve 5 8 ods,eh8015d-50206043012 06 high pressure switch kp-5 reset type,eh8015d-7 -5 kw-de-6208zz bearing of 3 phase mdtor,eh8015d -7-5-kw-nde-6208zz bearing of 3 phase motor,eh8015d-a1-0032 -14a key coupling,eh8015d-ats 22c11q softstarter-ac,eh8015d 502 09 055-07-03 sdnr 100 mm nb,eh8015d 502 13-040 -12- 32 1 3 8 globe valve,eh8015d-502 10-043-30 liquied line filter drier,eh8015d-502-16-025-15-01- c cr coil,eh8015d 50206043012-27 ac conoenser,eh8015d-fx14 1366-2282 se55 1 itr can,eh8015d-fx14-1366 4804 oil strainer,eh8015d fx14 1366-80106 piston assembly,eh8015d-fx14 1366-81284 front bearing flange,eh8015d fx14-1366 8435 connection rod,eh8015d-fx14-1366 8444 shaft seal,eh8015d fx14-1366-8445 crank shaft,eh8015d fx14-1366-8465 rear bearing,eh8015d 0 37 kw de-6203zz bearing of 3 phase motor,eh8015d-i5 kw-oe 6309zz bearing of 3 phase motor,eh8015d-502 13-060-18-10-atu 1 dust filter mesh for atu,eh8015d-k-315l single

CTN :42334603

06 Nov, 2025 NA

Rewari - Haryana

Tender For supply of supp of inverter compressor pcb , supp of noise filter pcb card , supp of condenser fan motor , supp of main power supply control card , supp of vrv condenser coil , supp of vrv inverter compressor , supp of inverter compressor pcb 2

CTN :42283498

24 Oct, 2025 NA

Kanchipuram - Tamil Nadu

Tender For providing of customized amc/cmc for pre-owned products - customized amc/cmc for pre-owned products - galley equipment; various brand; comprehensive maintenance contract (cmc); 24 hour response; yes--work for contract for annual maintenance contract of galley equipment at ins pallava-1. the contractor shall carry out preventive maintenance of the following, equipment every quarter: -, 1.1. cooking & heating equipment: -, - ss bme 304 grade hot bain marie, - electric hot plate (galley & wr), - 5 burner gas range (120"30"24"), - 2 burner gas cooking range with storage platform, - semi-automatic bench type industrial oven (3 deck), - electric griller chicken, - microwave oven / lg 30 ltrs mc 808, - food storage heating element electric with 04 containers (6kg, 304, grade ss), tasks:, - cleaning of heating surfaces and trays, - inspection and calibration of thermostats (half yearly), - checking and tightening of electrical terminals, - replacement of heating coils, knobs, and switches if required, - inspection of insulation and safety cut-off systems, - cleaning of exhaust vents and heat dispersion units, page 5 of 10, 1.2. mixing & processing equipment: -, - domestic blender/dough kneader sbwg 1500 watt 40 kgs, - cast iron commercial mixer 5 ltr, - wet grinder 10 kg cap, - pulvariser machine with stand, - vegetable cutting machine (up to 200 kgs), - potato peeler automatic 1.5 kw, tasks:, - cleaning of blades, jars, and grinding surfaces, - lubrication of moving parts, - inspection of motor windings and bearings, - calibration of speed controls, - replacement of belts, couplings, and safety covers, 1.3. refrigeration & cooling equipment: -, - ss icecube machine, - microwave oven, tasks:, - cleaning of condenser coils and drip trays, - checking refrigerant levels and gas charging (if required), - calibration of thermostats (half yearly), - inspection of compressors and insulation, - replacement of filters and seals, page 6 of 10, 1.4. exhaust & ventilation systems: -, - exhaust system for gas range, - exhaust hood with filter box and accessories, - 5 hp motor blower, tasks:, - cleaning of filters and ducts, - inspection of motor and fan bearings, - tightening of electrical connections, - replacement of worn-out belts and blades, - checking airflow and suction capacity, 1.5 cleaning & hygiene equipment: -, - wet and dry duty cleaning industrial vacuum cleaner 220smvco1, - commercial dishwasher with dryer model deb424fp, tasks:, - cleaning of filters and tanks, - inspection of pump and motor assemblies, - descaling of internal components, - replacement of hoses, nozzles, and seals, - electrical safety checks, 1.6. lpg gas system, page 7 of 10, 2. defect rectification of all machines including replacement of defective parts., 2.1 all replaced parts/compounds should be branded make and should have a, guarantee of one year from the date of renewal., 2.2 the contractor is required to attend the defect within 24 hours of reporting the, defect through telephone., 2.3 spares using for maintenance of equipment should be the oem make., 2.4 repairs / replacement of any items should be carried out as per the actual site, requirement / technical necessity., 2.5 rate quoted is inclusive of all taxes, freight charges, packing charges, spares,, transportation, service charges etc., 3. comprehensive coverage includes, - free overhauling: as per unit requirement., - free spares: due to wear and tear during contract period., - free labour: for all listed equipment., - free electrical wiring: internal wiring repairs., - free fan motor repairs: including winding and bearing issues., - free chemical washing: during overhauling., - free transportation: for off-site servicing., - free compressor & gas charging: for refrigeration units.,

Central Government And Public Sector

CTN :42342983

21 Oct, 2025 NA

Bongaigaon - Assam

Tender For supply of 3 phase induction condenser motor suitable for lhb type rmpu ac coaches 415 v ac,3ph,50hz,0.75 kw,1500 rpm(synchronous speed) frame size 80 m suitable for foot cum face mounting(type c flange) as per drg.no. nil specn: rdso spec.no.rdso/pe/ spec/ac/0089.(rev 0)with amend no.1&2.

CTN :42359819

28 Oct, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of disc clutch assy,cover clutch assy,connecting slave cyl,assy actuator motor fresh,nyloc nut,facia bumper frt,grill bumper frt,condenser assy,hose pipe coolant outlet,radiator hose assy inlet

State Government

CTN :42361702

03 Nov, 2025 29.11 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of 132kw, 0.4kv teco-westinghouse make condenser vacuum pump motor installed at unit no.5, 1x500mw, sgtps, mppgcl, birsinghpur.

State Government

CTN :41620380

22 Oct, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco - ktps-vii stage -em-procurement of bearings for condenser vacuum pump moter and mot ovef motor

corporations/Associations/Others

CTN :42302427

20 Oct, 2025 NA

Vijayapura - Karnataka

Tender For auction sale of scrap motor, wiper ,blower fan motor,scrap alternator starter,scrap glass,sheared bodies scrap,sheared bodies scrap (cv),scrap rubber,scrap aluminium (cv),car carrier container with 4 tyre,defaced engine (2w),defaced engine (cv),scrap differential (cv),scrap leaf suspension (cv),tyre with rim (cv),scrap radiator, condenser intercooler aluminium,scrap e-waste (pcb category),scrap seat,scrap plastic (pcb category),mix steel with chassis,scrap wiring harness

Tube Condenser Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

State Government

State Government

corporations/Associations/Others