Latest tungsten plate Tenders | Government tungsten plate Tenders

Central Government/Public Sector

CTN :38208797

27 Nov, 2024 NA

Kapurthala - Punjab

Tender For supply of furnishing plate for conventional coaches without engraving coach no.,c oach type and date of manufcature, as per drawing: cc64116 alt f, packing instruction: card board boxes [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38192486

19 Nov, 2024 NA

Palakkad - Kerala

Tender For supply of actuator components - guide bush, locking plate, guide ring, packing flange, packing retaining ring

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government / Public Sector

CTN :38208160

02 Dec, 2024 NA

Sambalpur - Odisha

Tender For manufacture and supply of fabricated anticreep device for 10125 mm curved switches with zu-1- 60thick web tongue rails b.g. (1673 mm) for 60 kg (uic) on psc sleepers as per rdso drg. no. rdso /t-8782 &rdso/t-8783 complete with fittings (including 27 mm dia. hts bolt with nut to drg. no. rdso/t- 8786 & rdso/t-8787 and hardened packing plate to drg. no. rdso/t-8784 & rdso/t-8785) acd material shall be structural steel confirming to the requirement of grade e-350/br of is: 2062-2011 indian standard hot rolled medium and high tensile steel - specification (seventh revision). notes : (i) the 27 mm dia hts bolt and nut shall be confirm to is:3757 & is:6623 and shall be manufactured by rdso approved vendor fo r hts bolts & nuts. the dimension of hts bolts and nuts shall be as per drawing no. rdso /t-8786 & rdso/ t-8787 . these bolt and nuts are shall be arranged and supplied by the suppliers /tenderers . (ii) hardened packing plate shall confirm to is : 6649 and material 45c8 steel according to is:1570 (part 2). the dimensi on of hardened packing plate shall be as per drawing no. rdso/t-8784 & rdso/t-8785. hardened packing plate shall be arranged and supplied by the suppliers /tenderers. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :36953989

23 Nov, 2024 NA

Chittorgarh - Rajasthan

Tender For corrigendum : supply of supply of packing for valve 3690-cv-1009 , supply of gasket for valve 3690-cv-1009 , supply of cage for valve 3690-cv-1009 , supply of plug for valve 3690-cv-1009 , supply of seat ring for valve 3690-cv-1009 , supply of plug stem for valve 3690-cv-1009 , supply of spare balance ring graphite for valve 3690-cv-1009 , supply of diaphragm nitrile for valve 3690-cv-1009 , supply of spring for valve 3690-cv-1009 , supply of cover plate joint for valve 3690- cv-1009 , supply of seal box o ring for valve 3690- cv-1009 , supply of collor o ring for valve 3690-cv- 1009 , supply of sealing ring, material is graphite,for valve size 4 inch and trim size 2 inch for valve 3690-cv-1009 , supply of packing for valve 4115-cv-6011 , supply of gasket for valve 4115-cv-6011 , supply of cage for valve 4115-cv-6011 , supply of plug for valve 4115-cv-6011 , supply of seat for valve 4115-cv-6011 , supply of stem for valve 4115-cv-6011 , supply of diaphragm nitrile for valve 4115-cv-6011 , supply of spring for valve 4115-cv-6011 , supply of cover plate joint for valve 4115-cv-6011 , supply of seal box o ring for valve 4115-cv-6011 , supply of collor o ring for valve 4115-cv-6011

Corporations And Associations And Others

CTN :36342958

04 Dec, 2024 NA

Panipat - Haryana

Tender For corrigendum : supply of ash handling spares for ptps panipat - "ash handling system spares item name:check valve size:2 in part number:a-103 assembly: material handling valve,size:8 x 6 in equipment: fly ash make:indure model:for 210 mw, additional information:for air inlet,same for 250mw,600mw, valve butterfly type:wafer size:300 mm pressure rating: class 150 end connection:not available body & bonnet material/spec:cast iron disc material:ductile iron seat material:nilon coated epdm operating type:manually gear operated, valve butterfly type:wafer size:150 mm pressure rating: 10kg/cm2,class 150 end connection:flanged body & bonnet material/spec:mild steel disc material:ductile iron operating type:manually gear operated length:82 mm indian standard:is:13095 , valve butterfly type:wafer size:200 mm pressure rating :10kg/cm2,class 150 end connection:flanged body & bonnet material/spec:mild steel disc material:ductile iron operating type:manually gear operated length:82 mm indian standard:is:13095 , valve gate size:50 mm pressure rating:class 150 body & bonnet material/spec:bronze end connection:screwed additional information: is778ci2,rising spindle,os&y,body bonnet dicsis318gr2,stem h.t.brass body seat ring is318gr2 , "valve gate type:not available size:25 mm pressure rating:not available body & bonnet material/spec:bronze end connection:screwed , "valve gate type:rising spindle size:15 mm body & bonnet material/spec:bronze end connection :screwed operating type:manually isolating, "valve gate type:rising spindle size:20 mm body & bonnet material/spec:bronze end connection: screwed operating type:manually isolating, valve gate type:rising spindle size:40 mm pressure rating :class 150 body & bonnet material/spec:bronze end connection:screwed operating type:manual, "valve gate type:knife size:300 mm pressure rating:12 kg/cm2, class:150 body & bonnet material/spec:cast iron stem & trim material / spec:moc of plate:ss-304 end onnection:flanged, operating type:manual additional information:suitable for fly ash, valve gate type:knife size:200 mm pressure rating:12 kg/cm2, class:150 body & bonnet material/spec:cast iron stem & trim material / spec:moc of plate:ss-304 end connection:flanged operating type:manual additional information:suitable for fly ash, "valve gate type:rising spindle size:80 mm pressure rating: class 125 body & bonnet material/spec:cast iron stem & trim material / spec:steel/aisi1410 seat material:stainless steel, end connection:flanged operating type:manual, valve gate type:o,s & y size:100 mm pressure rating:asa 125 body & bonnet material/spec:cast iron stem & trim material / spec:aisi:410 seat material: 13% cr steel end connection: flanged operating type:hand additional information:rising spindle,flanges as per bs-10 table "f", "valve spares item name:gland follower & packing part number:kgv300823/7 equipment:control valve make:galaxy , size of valve:300 mm

CTN :38162996

29 Nov, 2024 NA

Kargil - Jammu And Kashmir

Tender For supply of 0rd 34 - nozzle , hyd head , supply pump , supporting ring , drive shaft , cam plate , td piston , screw plug , pump housing , roller , roller pin , cross disc , toothed gear , roller ring , solenoid , element , delivery valve , washer , packing kit

CTN :38163023

29 Nov, 2024 NA

Kargil - Jammu And Kashmir

Tender For supply of ord 33 - packing kit , pump housing , td piston , hyd head , positioner , roller , roller pin , drive shaft key , woodruff key , pressure control valve , cam plate , solenoid , oil seal , dv 501 , element , nozzle

CTN :37913744

13 Nov, 2024 NA

Kamrup - Assam

Tender For bid to ras tender for supply of hand pump dhp 6002 21 81 , main brake valve 443 612 226 013 , separator 620 1401 , armature 19024318 , electro magnetic valve , becon orange 8563 5 201 24v , air pressure guage 044 10 kpa , clutch plate 420 210 gsz , dome light , centrifugal oil filter rho 2d 3929 , fuel feed pump cd 6a 2281 , bulb 24v 4w ba 9s counter packing lights , wiper arm , bulb 24v h4 75 70w

CTN :37881146

30 Nov, 2024 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of pipe pressure gauge replenish p front , m2 bof 6125525 screw securing for buffer , m2 5945 001644 housing armature soft iron 50mm , m2 bof 6103141 spring outrigger locking plunger , m2 bof 6107114 spring for bracket sight left , m2 bof 6146436 pawl hooper feed , m2 bof 6126243 rod for road speed lever synchro traversing , m2 bof 6156725 valve for valve main gear axle raising front and rear , m2 bof 6006883 2 plug filling drain for buffer , m2 bof 6097086 lever connecting rod for loader automatic , m2 ian 239sa coupling brake cylinder hose for installation brake , m2 bof n5 10 12 circlip seeger pattern int n5 10 12 , m2 bof 5047791 bearing for adjuster assembly , m2 bof 6115958 cape body tube for gear elevating , m2 bof 6115889 collar piston ring for buffer , m2 bof 6135079 2 shaft rammer cocking lever for loader automatic , m2 bof n5 13 45x55x3 spacer bearing n5 13 45x55x3 , m2 bof n5 13 50x60x4 spacer bearing n5 13 50x60x4 , m2 bof 6110079 2 block for hopper automatic , m2 bof 6265038 covering leather 2.5x76x255 , m2 bof 4026964 ring support , m2 bof n4 9 8x18x15 pin joint n4 9 8x18x15 , m2 bof 6151814 cover for control local power , m2 bof n5 23 washer micro switch n5 23 , m2 ian 221sa pipe main pressure t coupling traversing vsg filling box piston , m2 bof 6107516 cover access outer mounting body , m2 ian 358sa pipe chageover valve trailer c valve , m2 bof 6132647 plug exhaust panel air control brake , m2 ian 248sa pipe change over valve , m2 ian 103sa pin locking head , m2 bof 6121705 bracket anchor bar for gear raising front , m2 bof rk 8x90 key rectangular rk 8x90 , m2 bof 6143493 bracket breech block actuating spring for rack ammunition , m2 bof 6079323 latch for platform rear platform travelling , m2 bof 6132814 plate for box distribution gun , m2 bof 6168237 2 shim control valve 0.1mm for gear variable speed traversing , m2 bof 5050092 piston for body , m2 bof 6123494 shim drive shaft bearing 0.35 mm for hydraulic drive , m2 bof 6177047 spring control valve for gear variable speed traversing , m2 bof 6118954 seating spring balancing gear , m2 bof 6006879 3 nut gland for buffer , m2 bof 6112723 screw valve for gear axle raising front and rear , m2 bof 6098816 bush connecting lever for gear firing , m2 ian 77a piston unit for gear variable speed elevating and traversing , imb 0536 kit for packing ring , m2 ian 283sa socket blanking plug for installation brake , m2 ian 90sa pipe regulating valve cylinder for gear axle raising front , m2 ian 100sa pipe regulating valve cylinder for gear axle raising rear , m2 ian 83sa bearing pivot for platform travelling , m2 bof 6181674 plate name service line brake installation , m2 bof 6080659 2 plate name warning , m2 bof 6125104 dip stick for hydraulic system , m2 ian 193sa pipe exhaust traversing pilot valve , m2 bof 6115658 spring for gear axle raising gear m2 bof 6137590 spring hand operating gear arc pawl , m2 bof 6105122 pin hinge tilting box piston for gear variable speed , m2 bof 6118807 fork hydraulic system mechanism linkage , m2 bof 6151795 lever safety pin for control local power , m2 bof 5057569 plug installation brake platform bid details/ 2 / 62

Tungsten Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Corporations And Associations And Others