Latest ultra violet lamp Tenders | Government ultra violet lamp Tenders

Central Government/Public Sector

CTN :42283705

04 Nov, 2025 NA

Bhavnagar - Gujarat

Tender For supply of details description of specification for 100 watt led flood light - led rating in warm)/system wattage/rated power, led luminaire conformity to 15:10322/part 5/section 5/2012 latest and 15: 16107, (part 2/sec 1):2012, photo biological safety of leds used shall be as per 15:16108/2012 (exempt grou, types of led luminave as per the 15: 161070part-2/sec-11/2012, types of led modules as per the 25: 16103(part 2)/2012, led rating/system wattage/rated power, luminaire system efficacy bumen/watt), ingress protection (ip rating) as per 1 10322 (part 1): 1982 latest, mounting brackets fincluded, warranty for free replacement (in year), input operating voltage range and frequency, automatic higher cut off voltage above 300 volt, rated voltage, ac power factor at hill load, driver efficiency lin sage), total harmonics distortion (in lage), the total circut power shall not be more than 110 percent of the valve declared, by the manufacturer, led chip efficacy, colour temperature (+500), working life for led (minimum 50,000 buming hours as per lm-80 report), coltur rendering index(cri), optic lenise materal (uv stabilued) (write na or without optic lense supply), heat sink should be die-cast aluminum along with sufficient heat sink fins to desipate heat effectively, capacitor shall be ratail for a temperature of 105 deg. ceblus or better, junction temperature, operating temperature range, operating humidity range, short circuit protection, overload protection, over voltage geutection, reverse polarity, high voltage test (1.5 kv for ane minute between napply terminats and body of the, unit), insulation resistance between earth and current carrying part, the luminaire shad be protected against surges and transients (internal), the luminaire shall be protected against surges and transients of >/1kv, (external, the luminaires casing/housing (single piece housing) shall be pressure de catted, aluminum alloy with higher thermal.conductivity, the lummaire body must be corrosion resistant epoxy powder couted, all fasteners must be of stainless steel, the entire housing (both led section and driver section) shall be dust and water proof having ip 66 protection as per 15:10322 (part 11:1987 latest, luminaries light transparency should be of toughened glass, toughened transparent glass cover thickness, toughened glass shall not get discolored shall not suffer degration due to heat and agning within warranty period, number of electronic control gest (power sanoles), driver components shall be industrial grade or above, pci shall be fre grade minimum 0.8 to 1.0 mm thick or mom, the luminaires works on single phase three wires system (phase, neutral and, earth, suitable connector shall be provided for led connection between driver output, and led, length of st marked three cors wire (shall be provided along with supply of, materiall, ught source, manufactures name and and brand on the aluminium die cast body, manufacturer's name, model number, serial number, date of manufactiare (month-year), and int number as identification mark inside each unit and the outside of each packaging box, the operation characteristics voltage and power be marked inside of each led, system must have emi/emc compliance as applicable (test reports shall be furnish on demand by buyer/consignee)

Private Sector

CTN :42309414

23 Oct, 2025 42

Bengaluru - Karnataka

Tender For inviting rates from prequalified suppliers for annual maintenance contract (amc) with & without spares for solar power plant- off grid , solar water heater with air source heat pump, solar led street light, solar water pumping system and solar high mast supplied under the brand name of hot spring and msil lights

Central Government And Public Sector

CTN :42297602

20 Oct, 2025 NA

Lumding - Assam

Tender For supply of led based flasher light system to rdso specification no. elr/spec/lfl/0017[rev.1 sep-2004]firm should be clw approved source only.

Central Government/Public Sector

CTN :42252271

01 Nov, 2025 9.42 Lacs

Nowrozabad - Madhya Pradesh

Tender For supply of sdl spares oem oes opm proven source c c > f> f - return filter element new_pn_eea0028457 , shaft tension end_pn_625c000003248 , sprocket_pn_625c000003249 , seal kit of lift cyl c_pn_eea0002958 , led lamp for head light 7w 12v_pn_eea0030279 , bush_pn_mbh506050s , hex sock head cap screw_pn_3702643 , hex nut_pn_3690116 , kit commando_pn_eea0017406 , hex head bolt_pn_3700612 , gasket_pn_627b000000121 , hyd hose_pn_stdb025007 , cartridgecrv_pn_eea0018939 , pin_pn_611b060000008 , pin_pn_611a060000017 , counter balance valve_pn_eea0020817 , bush_pn_625a050000128 , pin_pn_611b060000003 , pin_pn_611a060000005 , bush_pn_mbh405050a , bush_pn_mbh506050a , bushbucketchain_pn_eea0018390 , link pin_pn_625a000003261 , flat washer_pn_maw10gg , hex head bolt tank_pn_3700306 , hex head boltorcage_pn_3700404 , hex head boltorcollar_pn_3700807 , oil seal pump_pn_eea0003784 , hyd hose_pn_623a01515008 , lamp holder with clamp_pn_eea0018520 , lighting transformer_pn_eea0023426 , mcb 20a_pn_eea0023431 , micro switch_pn_250a000000586 , pilot relay_pn_eea0027674 , screw gear box cover_pn_eea0004962 , screw gear box cover new_pn_eea0021911 , dp mcb 2a_pn_eea0028707 , fuse 1a_pn_eea0023429 , metallic handle for switch_pn_eea0028675 , rccborelcb_pn_eea0023428 , hour meter_pn_eea0023427 , bush_pn_eea0023416 , kit for track part_pn_611m100000239 , hex head bolt_pn_stdb035 12 30 , dust seal conveyor motor_pn_eea0018013 ) /bid number : gem/2025/b/6682113 * /dated: 11-10-2025 & & / bid document 1 / 56

Central Government/Public Sector

CTN :42209780

30 Oct, 2025 NA

Raigad - Maharashtra

Tender For tender for supply of curtis make mosfet electronic motor speed controller-120424/36v, cable gland-size 1.25 cable gland-single compression, brass nickel plated (is-319) with sealing ring of natural rubber or neoprene standard thread with checknut for armour cable indoor use make comet, comex or equivalent, hummer h24pro jump starter battery for 24v+12v/4000a, vehicle 99900mwh, model: hummer h24pro make: general motors usa or equivalent, earthing cable 16 sqmm, alluminium conductor pvc insulated,, round bimetallic washer of al 80% & clu 20% by volume id 10 od 202 mm thk, round bimetallic washer of al 80% & cu 20% by volume id 12mm od24mm 2mmthk, distribution board made up of sheet steel material, ip42 protection, with incoming 3ph + n 63a isolator & outgoing 12 no (4 per phase) 1ph+ in, 20a, 30milliamp rcbo, completely pre wired, make: legrand, havelles, siemens or equivalent, as per latest bis standard, distribution board made up of sheet steel material, ip42 protection, with incoming 3ph +n 100a isolator & outgoing 3 no. (1 per phase) 3ph+in, 63a, 30milliamp rcbo, and 6 no. (2 per phase)1ph+in 20a, 30milliamp rcbo, completely pre-wired make: legrand, havell, siemens or eq, as per latest bis standard, ferrule 35mm2 dowel cat als-2 compression type aluminium, aluminium in-line connector [ferrule), size 50 mm2 compression type, dowell's cat.no. als-12, led type indication lamps 24v dc cut out size 16 mm red reflector, lock nut & washer with screw type wire termination altos make, led type indication lamps 24v dc cut out size 16 mm green reflector, lock nut & washer with screw type wire termination altos make , bldc ceiling fan, 28w +/-2w, 1200 mm, compatible with regulator, no of running position -5, (without remote), bee s star rated energy efficient, high air delivery 240 cmm with min 325 rpm, 3 years warrantee, color-white, copper winding, min pf 0.9, double ball bearing, class of insulation "b", lenghth of down rod-300-350mm, shackle thickness min.2mm, marking of each ceiling fan-as per c1.8.1 of 15:374:2019 latest with all accessories, 230v, 50 hz, with test report from-lab/nabl/ilac make-atomberg, orient or equivalent., intelligent photo electric smoke detector with base, spe-operating voltage: loop 24v, standby current $ 0.8ma, alarm current 5.0ma, 1 & 3: loop connection (polarity-insensitive), 2: positive terminal of remote indicator, 4: negetive terminal of remote indicator, refer to installation and operation mannual 30304603 for details of specification and installation, etc. standard: en54-7, product no. 10102913, make-gst or equi suitable for gst make control panel, pvc casing caping size1 each strip of 2 mtr. long, make prestoplast or equivalent, as per latest bis standard, rcbo,230 vac, 2p,2 module, 20 amp, 30ma l & t, abb, legrand or equivalent, pvc insulated 40*2.5 sqmm flexible cable pvc sheathed as per is 694-1990 with is mark, 1100 voltage grade bright annealed bare copper conductor, colour of outer sheath red, blue, yellow, green, roll length: 100 meters, isi mark, rcf shall be markrd at every meter along the length, make polycab, miracal or equivalent, led based outdoor type streetlight fittings:, wattage: 120w +/-5w supply. voltage: 230v ac, 50hz, ip65, lumen: min 90lumen/watt temperature range: 00-6500k, cri-min 70, 4kv surge protected lmbo certified, crompton/baiai/equivalent make, led based industrial high bay light fixture; wattage 120+/-2w supply voltage 90 to 270v ac with technical specifications as per sheet attached., cieling mount high sensitivity occupany/presence pir sensor. detection range: 360°, power source: 220-240v/ac, rated load: max 2000w detection distance: max.20m. time delay: 10sect 3sec to 30 mint 2min (adjustable), ambient light: <3-2000lux (adjustable), installation height:2.2m-6m, suitable for indoor air conditioner switching

State Government

CTN :42243528

31 Oct, 2025 39.62 Lacs

Asansol - West Bengal

Tender For augmentation of damalia pump house by roof treatment of existing pump house of adda, sinking and installation of 4 numbers river bed tube well for increse of source of damalia along with replacing of old sodium vapour light by led light within annual maintenance contract

Central Government/Public Sector

CTN :42200322

29 Oct, 2025 NA

Ajmer - Rajasthan

Tender For supply of 1.compact flourescent light fitting single without 4 pin 11 w cfl lamp & electronic ballast. the fitting is to be provided with holder. the complete fitting shall confirming to rcf drawing no. cc 76215 alt-d.2.fitting side lamp complete, suitable for passenger brakes van, confirming to rdso drg. no.skel- 4094 with alteration -a. the colour convention of side lamp fitting is out side black colour and inside white colour. the fitting shall be supplied without lamp/bulb.3.night light fitting icf drg. no. icf/s.k. 7-6-020 col .iii alt. 'm' or latest for screw type lamp (without lamp).4.alarm chain pull indication light fitting conforming to rdso drg no skel-3911 [rev-1]alt-c with the following requirments [1]the outside of light fitting should be finished in synthetic enamel red paint to is 2932[2] the lens shall be clear and colourless [as per item -4 of rdso drg no skel3911] [3] holder shall be screw type e-27 [4] the cable entry hole shall be 20 mm dia instead of 11 mm dia.indicated in the drawing [5] holes shall be provided to suit 20 mm dia grommets.5.led foot light as per following details:- i) power: 4 watt. ii) input voltage range: 90-140v dc. iii) light colour: warm white. iv) color temperature: 3000k. v) ligh source: high efficiency long life smd led. vi)material: aluminium die cast. vii) finish type: powder coated. viii) shed colour: white. ix) mounting: wall mount. x) installation type: flush mount. xi) switch: no. xii) product dimention: a) length: 85 x 5mm.b) width: 85?5mm. c) height: 30?5mm. xii) cut-out(c): 70 x 70mm. xiii) indoor/outdoor usage: indoor. xiv) lighting method: down light. make : similar to victoria brand, model no. vlfl4.

State Government

CTN :41736317

21 Oct, 2025 41.83 Crore

Daman - Gujarat

Tender For corrigendum : purchase of equipment for 300 bedded new government hospital, marwad, daman. (2nd call) - supply, installation, testing and commissioning of mri 1.5 tesla, supply, installation, testing and commissioning of ct scan-128 slice with angio graphy attachments, supply, installation, testing and commissioning of 800 ma fixed digital radiography system, supply, installation, testing and commissioning of modular multipara patient monitor, supply, installation, testing and commissioning of cautery machine with vessel sealer and under water biopolar saline, supply, installation, testing and commissioning of neonate ventilators with high flow, supply, installation, testing and commissioning of operating microscope (ophthalmic), supply, installation, testing and commissioning of adult ventilator, supply, installation, testing and commissioning of high flow nasal cannula device, supply, installation, testing and commissioning of dialysis machine, supply, installation, testing and commissioning of c-arm machine with fluroscopy, supply, installation, testing and commissioning of 3 chip hd laproscopic unit co2 insufflator, light source, medical grade monitor, video processor, 30 and 0 degree telescope and recording system, supply, installation, testing and commissioning of 3 chip full hd endoscopic unit consists of telecam, light source, monitor with medical grade monitor and recording facility, supply, installation, testing and commissioning of pediatric ventilators, supply, installation, testing and commissioning of high end usg machine with cardiac probe, supply, installation, testing and commissioning of battery operated drill system with oscillating and reciprocating saws and batteries, supply, installation, testing and commissioning of gastroscope and colonoscope with video processor, led light source and medical grade monitor, supply, installation, testing and commissioning of 20 nos. modular multipara patient monitor (nibp, ecg, spo2, rr, temp) with central nursing station and 5monitors with dual ibp and 5 monitors with etco2 (1 set), supply, installation, testing and commissioning of syringe pump, supply, installation, testing and commissioning of mammography machine digital, supply, installation, testing and commissioning of optical coherence tomography-f with angio, supply, installation, testing and commissioning of automated apheresis machine, supply, installation, testing and commissioning of automatic endoscope reprocessor, supply, installation, testing and commissioning of optical biometry with swept source oct technology, supply, installation, testing and commissioning of portable sonography machine (1 set), supply, installation, testing and commissioning of 12 channel ecg machine, supply, installation, testing and commissioning of digital opg machine with cbct, supply, installation, testing and commissioning of fully auto immunoassay system, supply, installation, testing and commissioning of retrofitting for x-ray machine, supply, installation, testing and commissioning of ao type pelvis+ acetabular fixation instrument set, supply, installation, testing and commissioning of operating microscope(ent), supply, installation, testing and commissioning of 600 ma x-ray machine, supply, installation, testing and commissioning of biphasic defibrillator, supply, installation, testing and commissioning of phaco emulsification machine, supply, installation, testing and commissioning of incubator cum radiant warmer, supply, installation, testing and commissioning of fully auto clia analyser, supply, installation, testing and commissioning of anesthesia work station with anesthesia ventilator, patient monitor and circle absorber, supply, installation, testing and commissioning of fully automated 5-parthematology analyzer, supply, installation, testing and commissioning of automatic urine analyser, supply, installation, testing and commissioning of ultrasonic cutting and coagulation system, supply, installation, testing and co

State Government

CTN :42036819

06 Nov, 2025 NA

Chandigarh - Chandigarh

Tender For design, engineering, supply, installation, testing and commissioning of an alert, inform and direct system at six (6) sites - control & monitoring :- the control room shall be set up in the already constructed/available room at the pandoh dam area. this system should include a minimum 43-inch (hd) screen with an adjustable stand, capable of monitoring the operation of the siren station. it should display all feedback, including the status of being on or off, battery health, any faults etc. in the installed equipment. additionally, this system must have the capability to communicate directly with the control room to provide alerts and information in real time., for supply ,testing, designing, erection and commissioning of local station for alert, information and direct system comprising of the following hardware/software: panel/housing with power supply module. the controller, linked with all the control units through a communication and integration unit, displays the system via screens. the sirens should also be remote controlled. the control of the sirens should be according to the commands received from the remote central control station through a two-way gsm/gprs/3g/4g/lte and provision of vsat. security feature including intrusion alarm auxiliary/status control board for contact closure activation and status. the siren system should withstand outdoor environment condition & the siren assembly should be rust proof to withstand harsh and saline environmental condition. single point clicks activation & polling. status monitoring. complete configuration & reprogramming for control site. minimum 15,000 message alert notification through gsm/3g/4g/5g/lte/vsat to bbmb officials/ administrators and local residents according to requirement. programmable hot keys. communication over tcp/ip secure access with password. ethernet cable length :- the bidder shall be responsible for the supply and erection of all cabling required for the complete system, ensuring that the cables are of reputable make only and conform to the prescribed standards as per site requirements. rtu & software :- the r.t.u. and software as per the manufacturer`s design / program, the software should be suitable for controls up to 100+ sirens, the system can be expanded to accommodate changing needs. the software should be app and web based. communication between control centre and sirens. :- gsm/3g/4g/5g/lte network/vsat. pre-recorded voice messages :- live and pre-recorded voice messages in minimum 3 local languages i.e. (hindi, punjabi and english) strobe light :- high intensity led strobe light, color red, amber, green, 60-120 flashes per minute (adjustable), led life > 50000 hrs., pole/top mountable with 360 visibility preferably ip 66. alert tones & voice:- minimum 5 standard alert tones. support transmission of stored voice in siren/voice controller through wave file in memory card, remote activation. remote activation of alert tones and pre-recorded voices the voice messages will be customized, optimized for good quality for the intended location, language preferably in punjabi, hindi & english. warranty period:- 3 years., input power source :- the quantity of solar photovoltaic panels and batteries shall be adequate to meet the systems operational requirements. only reputed manufacturers such as tata solar, vikram, waaree, reil, or equivalent brands shall be supplied. the solar panel input source shall be integrated with the required number of batteries to run the installed system continuously for a minimum duration of three (3) days under idle running conditions. this includes six (6) operational cycles per day, with each cycle lasting a minimum of twenty (20) minutes. a secondary provision for electrical input supply shall be provided to enable system operation in the event of solar panel failure or insufficiency beyond the designed power supply capacity., siren type :- bi-directional electronic siren pre-programmed audio amp

Ultra Violet Lamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors