Latest ultrasonic testing machine Tenders | Government ultrasonic testing machine Tenders

Central Government/Public Sector

CTN :44997525

10 Jun, 2026 6.65 Crore

Aizawl - Mizoram

Tender For corrigendum : supply of ct -128 slice scanner

Central Government/Public Sector

CTN :45382119

05 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For calibration of 4 nos of ultrasonic testing machines

State Government

CTN :44667629

12 Jun, 2026 12.00 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply, installation and commissioning of 16 slice dual head spect/ct scanner for pgims, rohtak on one time purchase basis as mentioned against item in schedule of requirement.

CTN :45048307

30 Jun, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

corporations/Associations/Others

CTN :45370710

13 Jun, 2026 NA

Multi City - Multi State

Tender For tender for supply of spares of seal and scanner air fans make aira - pneumatic solenoid valve (with coil)model d-5/2-otx kg/sqcm 0-7 sl.no. 0822020 (as per atc) make aira automation , rotary limit switch model-mls-bx-flp-01-b sl. no. 22031103 cable entry (as per atc) make aira , pneumatic rotary actuator model ct-75-d sl no. a-750122185-so-14x14 optg pres 5 bar ex ii 2 gd t6 ex h iic t6 gb ex h iiib t85degc db make aira , solenoid coil model no. flp 3666 voltage 24 vdc cable entry npt coil sl no 22064424 flp type ex d ip-67t6 gas groupiic make aira , pneumatic actuatormodel say-35-d upon a sl no say-350922002 optg pr 5 bar ex ii 2 gd t6 ex h iic t6 gb ex h iiib t90degc db make aira , pneumatic namur solenoid valve(with coil) 3/2 way-5/2 way model otx-3/2-5/2 solenoid coil model no. flp 3666 voltage 24 vdc cable entry npt coil sl no 22064424 flp type ex d ip-67t6 gas groupiic , pneumatic actuatormodel say-18-d/a sl no 180922002 so36 x 36 optg pr 5 bar ex ii 2 gd t6 ex h iic t6 gb ex h iiib t90degc db make aira , seal kit for pneumatic solenoid valve (with coil)model d-5/2-otx make aira , seal kit for pneumatic rotary actuator model ct-75-d sl no. a-750122185-so-14x14 optg pres 5 bar ex ii 2 gd t6 ex h iic t6 gb ex h iiib t85degc db make aira , seal kit for pneumatic actuatormodel say-35-d/a sl no say-350922002 optg pr 5 bar ex ii 2 gd t6 ex h iic t6 gb ex h iiib t90degc db make aira , seal kit for pneumatic namur solenoid valve(with coil) 3/2 way-5/2 way model otx-3/2-5/2 make aira , seal kit for pneumatic actuatormodel say-18-d/a sl no 180922002 so36 x 36 optg pr 5 bar ex ii 2 gd t6 ex h iic t6 gb ex h iiib t90degc db make aira

CTN :44399633

16 Jun, 2026 NA

Kamrup - Assam

Tender For corrigendum : procurement of medical equipment for mmch (package 1) - supply, installation,testing and commissioning of mri 3 tesla(along with associated works, accessories and allied items as specified), supply, installation,testing and commissioning of biplane dsa system with large flat panel detector with inbuilt angiography and intervention and stereotactic radiotherapy (along with associated works, accessories and allied items as specified), supply, installation,testing and commissioning of 256-slice dual energy spectral high end ct scanner (along with associated works, accessories and allied items as specified), supply, installation,testing and commissioning of 64 slice ct scan machine(along with associated works, accessories and allied items as specified), price schedulefor related services to be offered from outside and within the purchaser s country, comprehensive annual maintenance contract (camc) of the complete unit (mri 3 tesla) including spares and consumables for 5 years (after initial on-site warranty period), comprehensive annual maintenance contract (camc) of the complete unit (biplane dsa system with large flat panel detector with inbuilt angiography and intervention and stereotactic radiotherapy)including spares and consumables for 5 years (after initial on-site warranty period), comprehensive annual maintenance contract (camc) oft he complete unit (256-slice dual energy spectral high end ct scanner)including spares and consumables for 5 years (after initial on-sitewarranty period), comprehensive annual maintenance contract (camc) of the complete unit (64 slice ct scan machine)including spares and consumables for 5 years (after initial on-site warranty period)

CTN :45032018

08 Jun, 2026 13.00 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of spect ct scanner for the department of nuclear medicine

CTN :45279755

11 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For supply of portable digital radiography system samsung , portable digital radiography machine high frequency , portable x ray machine single phase siemens , apparatus x rays machine mobile high frequency multipulse 100 ma , multi slice ct scanner

corporations/Associations/Others

CTN :45271179

26 May, 2026 NA

Jodhpur - Rajasthan

Tender For auction sale of tvm meter scrap (ht) static (e-waste),11kv ctpt set scrap (assorted ratio),11 kv ct scrap,metering instrument scrap,rubber tyre scrap assorted size,rubber tyre scrap 750-16,rubber tyre scrap 600/16 (lcv),rubber tube scrap assorted size,fork lifter tyre a/size,vehicle battery 12 v u/s scrap (pcb applicable),scrap laptop (e-waste),mccb assorted ratio scrap three phase,capacitor bank scrap,computer monitor scrap (e-waste),cpu scrap (e-waste),keyboard scrap (e-waste),vaccum cleaner scrap,projector scrap,printer scrap (e-waste),dot matrix printer scrap (e-waste),fax machine scrap,scrap computer mouse,scrap scanner,empty drum c/d class,meggar scrap,cmri scrap,ceiling fan