Latest umbrella scrap Tenders | Government umbrella scrap Tenders

corporations/Associations/Others

CTN :36253653

13 Jun, 2024 NA

Kangra - Himachal Pradesh

Tender For auction sale of bty o/s,self starter assy o/s,computer o/s,tarpauline old,fire ext 9 ltr with brass cap,stainless steel (scrap),textile old,jack assy o/s,net mosqito,fire ext 50 ltr with brass cap,fire ext 6.5 ltr(with brass nozzle-49 & without brass nozzle-51),fire ext 9 ltr,csa (carbon steel alloy),mss(mild steel scrap),tentage old,woolen regs,blanket,boggie wheel (alluminium mix),computer o/s,fire ext 9 ltr with nozzle,boggie wheel alluminium,eng assy,mfm (mixed ferrous metal),steel scrap (boxes

corporations/Associations/Others

CTN :36253654

13 Jun, 2024 NA

Kangra - Himachal Pradesh

Tender For auction sale of parachute o/s,net mosquito,tentage old,csa (carbon steel alloy),gen set 11 kva (regd no g-30534),cap water proof,blanket,fire extingusher 50 kgs with brass cap,case & cradle o/s dozer-01,dozer engine s no 3232577,boot dms,bty scrap,jack assy o/s,steel scrap,steel scrap (loader,fire ext 9 ltr capacity,mfm,boot dms/ankle,gen set 40kva (w/o housing) (a) 0149 (b) 3046,boot dms ankle,tarpauline old,fire extinguisher 50 kg with brass capr,alternator o/s,cover water proof o/s(tarpauline old),mt scrap,textile old,gen set 7.5 kva 2 wheeled tlr mounted ser no- 5404223,blanket o/s,jack assy o/s,fire ext 9 ltr without nozzle,gen set trolley mtd 11 kva s.no 0672005,gen set 5.6 kva s no 2403/3/09,mt scrap (filter),gen set 30 kva four wheel tlr mtd ba no 72s 1432y

corporations/Associations/Others

CTN :36223480

28 May, 2024 NA

Pune - Maharashtra

Tender For auction sale of 3/i blanket old,29/i net mosquito,33/ii canvas rags,7/i boot dms,18/ii mixed metal scrap,22/ii mild steel scrap,24/ii mfms,56/i gear boxes,62/ii mt scrap,83/ii computer scrap,197/i bty bsp

corporations/Associations/Others

CTN :36223224

30 May, 2024 NA

Agra - Uttar Pradesh

Tender For auction sale of blanket o/s,blanket o/s,boot o/s,boot dms o/s,cotton rags o/s (mix),glass scrap o/s (mix),gunny old,iron dust o/s,net mosquito o/s,nylon sp,parachute o/s,parachute o/s (small),rubber scrap o/s,rubber scrap o/s,rubber scrap o/s,tarpauline o/s

corporations/Associations/Others

CTN :36222885

03 Jun, 2024 NA

Multi City - Multi State

Tender For auction sale of blanket o/s,boot dms,bty mt o/s,bty scrap,bty sig o/s,cwp o/s,fire ext o/s,harden steel scrap,machinery o/s,mild steel scrap,tyre o/s,tent/o/s,tube inner o/s,wheel disc,web eqpt and miscellaneous,boot o/s,electronic scrap,eng other than mt,tent/o/s,tube inner o/s,wooden scrap,boggie wheel (t-72),blanket,mt scrap,tarpaulin old,net mosquito,telephone set o/s,helmet o/s,web eqpt and text miscellaneous

corporations/Associations/Others

CTN :36131585

16 May, 2024 NA

Multi City - Multi State

Tender For auction sale of steel scrap (table folding,bogie wheels (alluminium),steel scrap (jarrican),fire ext co2 22.5 kg trolly mtd,boot dms,steel scrap (leaf),palastic scrap,rubber scrap,steel scrap (stove oil heating,steel scrap (ramp loading),steel scrap (mine plough),gear box o/s tank-03,compressor motor operated,gen set 11.2 kva two wheel trolly mtd s.no 31330370619,net mosquito o/s,tentage,steel scrap (wheel scotch),tentage old,net mosquito,blanket o/s,fire ext 9 ltr,mt scrap (filter,boot dms/ ankle,fip o/s,gen set 30 kva four wheel tlr mtd ses/27/240/07/2000,textile old,leather scrap,boggie wheel (steel),tarpauline old,parachute o/s,road wheel,copper scrap (mixed),wooden scrap,axle assy o/s,gen set 11.2 kva 2 whld trolley mtd (reg no 45)

corporations/Associations/Others

CTN :36131586

16 May, 2024 NA

Multi City - Multi State

Tender For auction sale of eng assy o/s tatra ser no 4201075,boot dms,bty scrap,co2 twin trolley mounted fire ext cap 6.5 kgs with brass nozzle,net mosquito,fire extinguisher 22.5 ltr with brass nozzle,cotton rags (shirt angola,tarpauline old,helmet o/s,eng assy tatra ser no- (i) 4102850,textile old,fire extinguisher 9 ltr,helmet combat (fiber),tentage old (inner,net mosquito o/s,fire ext o/s,helmet combat fiber,signal scrap (ulsb,woolen rags (coat,boot dms/ankle

corporations/Associations/Others

CTN :36111396

15 May, 2024 NA

Udhampur - Jammu And Kashmir

Tender For auction sale of mfm (post piller),mfm (cabin assy gs lorry als),mfm (cabin assy als),mt scrap,helmet combat o/s,eng assy old w/o accessories,half eng assy,jack lifting o/s,tlr two wheel gs,wheel disc o/s,gen set o/s,wooden scrap,mattress o/s,coat parka inner,net mosquito o/s,bag sleeping complete,cotton rags,boot dms,tarpaulin old

CTN :36100477

25 May, 2024 NA

Multi City - Bihar

Tender For circular lifting magnet for lifting cold as well as hot material up to 600deg c in foundry environment . deep field coil design, copper wound for 220v dc operation, must include 03 leg chain and bail assembly, ext ernal electrical connectors and surge suppressor, heavy duty cast magnet designed for severe scrap handling d uty similar to ohio make model 66dcwx, confirming to the following specification for single magnet characteri stics- 1. cold current - 105 amps max. 2. cold power- 18.5 kw 3. self-weight should not be more than 5ton in clusive of chain, bail and other accessories 4. duty cycle: min. 50%, 24 hrs./ day 7 days/ week, to allow extra ha ndling time of hot materials at 10minutes lift cycle 5. diameter of magnet: 66inches -1 inch +3inch (1650mm -25. 5mm/+50mm) 6. lifting capacities shall not be less than (a) pig iron: h m s - 5200 lbs. (2359kgs) (b) broken/cu t scrap: 2700 - 3300 lbs. (1225-1497kgs) (c) steel turnings: 1700 lbs. (771kgs) note: the tolerance in lifting c apacity must be +/-25% of the above mentioned ranges at all operating conditions. 7. magnet conductor shall be of premium electrical grade copper with 99.99% purity with class h insulation for maximum coil life under severe operation. 8. magnet shall be of high grade cast steel welded construction for strength and waterproof. 9. heavy duty, nonmagnetic bottom plate & sealing plate, made of wear resistant & work hardened manganese steel shall be used to protect the coil from damage caused by impact including bumping plate. 10. additional protection from moisture & impact is to be provided to the coil with the use of non-magnetic manganese sealing plate.11. heavy duty, annealed alloy steel 3-legged chain with a master hook bail is to be provided.12. suspension lugs should be heavy-duty & pins shall be provided to connect the chain to the magnet. 13. suitable rating surge suppresser (me tro cell) shall be introduced in the magnet. 14. electrical connectors: - plug-in type connectors made from a size of 25 sq. mm 2 - conductor type "w" magnet cable, 2000v dc rated for durability and ease of replacement. 15. e xternal connectors to be clamped and protected with a shield. 16. 08 hrs. heat rise to be performed to verify mag net integrity. temperature rise test, high voltage test and insulation resistance test should be performed and reco rded for traceability and future reference. note: 1. magnet must be same or similar in all respects to the 66 inch ( 1676 mm) dcwx model, ohio make magnets. 2. all relevant tests and test certificates shall be submitted alon g with the supply. 3. the manufacturer shall carry out continuous load test. 4. warranty: 24 month from the date of commissioning and proving out of m&p. 5. stage inspection by tpi before closing the magnet and inspection r eport to be submitted by the firm to rwp/bela with the supply. 6. tenderer shall indicate the service support avail ability. stage inspection by tpi before closing the magnet (as 100% of po qty.) [ warranty period: 24 months after the date of delivery ]

corporations/Associations/Others

CTN :36092303

14 May, 2024 NA

Cuddalore - Tamil Nadu

Tender For providing of custom bid for services - custom bid for services - short term contract for relocation of high pressure drain valves from 0 ml elevation to 6 ml elevation in tps ii expn- 1.0 cutting and removing valves from the drain header at 0ml elevation. 2.0 the balance cut portion in the drain line where the valve was cut and removed to be welded with appropriate spool piece by ibr welder. 3.0 the drain lines coming from different locations to be re-routed to a common location at 6ml to make a valve station. 4.0 all valves removed from 0ml to be welded at the valve station at 6ml. 5.0 the gland packing of valves if required should be replaced by the contractor, the required gland packing will be provided by nlcil. 6.0 the vendor shall quote rates for re-locating each size of valve individually. 7.0 to facilitate a valve station at 6m drain lines would require re-routing. for re-routing nlcil will provide the required tubes. the bends required for re-routing should be fabricated by the vendor. the vendor may take the tubes for bending to his own facility for bending after submitting indemnity bond for value equal to that of the material. 8.0 for re-routing amount will be paid for per joint welded and per bend fabricated and used, nothing extra shall be paid. 9.0 for estimation it may be assumed that each line would require 10 joints (for replacing valves and re-routing line) and 3 bends. however payment will be made for only the executed quantities. 10.0 the path of re-routing will be decided by nlcil. 11.0 after the work is competed hydro-test will be conducted at design pressure ( for sh 203 ksc and for rh 52 ksc) and if any defects observed in work should be corrected by the vendor free of cost. 12.0 100% radiographic testing (except socket weld joints) should be carried out on all ibr joints (including repair/re-welds), the rate for welding should be inclusive of radiographic testing and nothing extra will be paid for radiographic testing. 13.0 the results of the radiographic testing will be checked by nlcil engineers and if any defects are found the re-welding should be carried out at free of cost. 14.0 all material required for work will be handed over to the vendor at nlcil stores only, the transportation of these material from stores to the work site is in the contractors scope. 15.0 removal of all scrap formed as a result of the work. 16.0 scope of the contractor regarding materials. 16.1 the following are in the scope of the contractor regarding the materials required to carry out the work. 16.2 all the tools and tackles required, namely winches, welding machines, cutting set, hoses, welding accessories, air hoses, pipe cutting machines ,grinding machines, 16.3 mother oven, normal oven, flask, slings, chain & pulley blocks, d-shackles, wire ropes, temporary supports, wooden planks, temporary platform grills, scaffolding pipe, clamps, fasteners & materials, blow torch, edge preparation machine, exhaust fans (for evacuation of welding fumes) and any other items required for the work 16.4 consumables such as gas cylinders (pure argon(99.999%), acetylene, lpg ,oxygen etc,),tungsten electrodes ,purging paper and others consumables (cotton waste, emery sheets, paint markers, thermo chalk, buffing wheels, die penetrant kits, kerosene, grinding wheels, cutting wheels, hacksaw blades ,etc.) required for the works. 16.5 personal protection equipment (ppes) such as safety shoes, nose mask, helmet, hand gloves, goggles, safety belts, ladders, crawling boards, safety net, full body safety belt, and any other material required to ensure the safety. 16.6 arrangement of electrical supply distribution for their electrical utilities along with necessary electrical distribution panels, cables, protection, safety relays, earthing etc. 16.7 arrangement for lighting at the work spot along with lighting equipment such as power cable, transformers, hand lamps 24 volt of sufficient quantity. 16.8 the contractor should furnish proper

Umbrella Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors