Tender For auction sale of rolling stock - sc. cut of parts of cond. coach, type-gslrd [icf], 1] er 042718. condition- a] sold along with electrical fittings but without mechanical excluded fittings as available 1] wheel sets with rb and axle box, 2] bogie, 3] helical spring of sorts, 4] distributor valve, 5] common pipe bracket, 6] control reservoir, 7] brake cylinder, 8] buffer plunger, 9] wearing piece [bronze], 10] aluminium/zinc water tank, b] cutting allowed, c] purchaser should comply the special condition for dismantling of wagons-coaches as per annexure to noc sl. no. 11652 issued by wbpcb. d] please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.
Tender For auction sale of rolling stock - sc. cut of parts of cond. coach, type-gslrd [rcf], 1] nr 01702. condition- a] sold along with electrical fittings but without mechanical excluded fittings as available, 1] wheel sets with rb and axle box, 2] bogie, 3] helical springs of sorts, 4] distributor valve, 5] common pipe bracket, 6] control reservoir, 7] brake cylinder, 8] buffer plunger, 9] wearing piece [bronze], 10] aluminium/zinc water tank]. c] cutting allowed, d] purchaser should comply the special condition for dismantling of wagons-coaches as per annexure to noc sl. no. 08056 issued by wbpcb. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-94405rcc/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/02/0005. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-081453 accnh/rcf 2. wc-081565 accnh/rcf 3. wc-081404 wrrm dac/rcf 4. wc -081613 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 64 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/03/0006. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-081521 accnh/rcf 2. wc-081379 accnh/rcf 3. wc-081358 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/05/0011. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. cutting will be allowed only after removing of inflammable items.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-081311 accnh/rcf 2. wc-081609 accnh/rcf 3. wc-081463 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/05/0012. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. cutting will be allowed only after removing of inflammable items.
Tender For corrigendum : supply of distributor valve for blc wagons, type ke2csla-14 g or c3w2, with pressure transformer and adaptor with isolating cock , but without common pipe bracket and control reservoir. other technical requirements conforming to specification no. 02-abr-02, read with all amendments, latest amdt.no.-4 of sept. 2016. [ warranty period: 30 months after the date of delivery ]
Tender For supply of injector gl 1 replacement , part no. 114909 , glc 2200 controller, part no. 24n468 , glc 2200 connector 1 and pins 12 , part no. 24p686 , pr switch, part no. 115124 , pressure guage 0 to 500 bar , part no. c11620 , hose sae 100r2,3 by 8 inch id,d10,2000 long , part no. c11631 , hose sae 100r2,3 by 8 inch id,d10,5000 long , part no. c11633 , vent valve kit, part no. 77x540 , motor kit, part no. 24t862 , stand alone pump reservoir 24v dc, part no. 77x000 , seal kit, part no. 24t860 , control board replacement kit, part no. 24t867 , glc 2200 wiring harness 5ft,w flyng lead, part no. 24p314 , gl 1x grease injectors 3 injectors, part no. 114903 , injector gl1, 4 point, part no. 114904 , injector gl1, 5 point, part no. 114905 , elbow connector 1 by 8 inch npt , part no. c11611 , elbow connector 1 by 4 inch npt , part no. c11612 , follower plate, part no. 77x500 , tank 60lb, part no. 77x535
Tender For auction sale of rolling stock - ubl-bgm-wagon-26-a [ pl no 98111048 ] condemned & unserviceable 08-wheeler broad gauge (bg) wagon 01 no. wagon no: nr boxnhl-22032016408 location bgm yard near railway electrification pole no 609/42 under the custody of sse/c&w/bgm. the purchaser shall physically inspect the lot prior to participating in the auction. cutting permitted by gas or manually in loadable sizes. purchasers shall not disturb or damage any other railway assets during dismantling or removal. all railway components (rc items) must be returned to the railway: (a) casnub bogie with fittings[wheel set with ctrb-04 nos,bogie-02 (2 items total - 06 nos) (b) complete cbc fittings [coupler body-2 nos, draft gear with front follower- 2nos,yoke -2 nos, yoke pin-2 nos,knuckle-2 nos, knuckle pin-2 nos, knuckle thrower-02 nos,lock-02 nos, lock lift assembly-02 nos, stricker casting-2 nos (10 items total - 20 nos) (c) air brake components-distributor valve-1 nos, control reservoir-01 nos, bp hose -02 nos, fp hose-02 nos, bp cock-02 nos, fp cock-02 nos, isolating cock-02 nos, a r tank-01 nos, dirt collector-02 nos, bmbs cylinder-2 (10 items total - 17 nos) (d)brake riggings -brake beam-04 nos, end pull rod-02 nos, hand brake wheel-02 no's (3 items total - 08 nos) (e)door(boxnhl flap door)-04 nos. road access has been made available up to the lot, images also uploaded. the purchaser has easy access to the lot via road for dismantling and cutting purposes. there is no need to cross the track to access the wagon. the sold lot will be handed over to the purchaser in the presence of the concerned custodian, nominated sr. asv/sr. isa/asv/isa, cdms/dms/sales and nominated rpf personnel. delivery will be affected on a number basis. note - a) all the bidders are advised to request the delivery request via ireps portal only. b) select delivery fixation date at least 7 days from the delivery request letter date. c) select 3 unique preferences for delivery date and submit to avoid rejection.