Latest upvc pipeline laying Tenders | Government upvc pipeline laying Tenders

State Government

CTN :41285773

08 Aug, 2025 NA

Una-Hp - Himachal Pradesh

Tender For restoration of rain damages fort/well 90 at dharampur in tehsil haroli distt. una (h.p.) (sh:- p/laying, jointing and testing of hdpe pipe 160 mm dia pe-80, pn-4 1/c construction of outlets & demolation of construction of cement concrete path.) (job no. 01)

State Government

CTN :41285776

08 Aug, 2025 NA

Una-Hp - Himachal Pradesh

Tender For restoration of rain damages fort/well 90 at dharampur in tehsil haroli distt. una (h.p.) (sh:- p/laying, jointing and testing of hdpe pipe 160 mm dia pe-80, pn-4 1/c construction of outlets & demolation of construction of cement concrete path.) (job no. 02)

CTN :41272076

08 Aug, 2025 6.69 Lacs

Kavaratti - Lakshadweep

Tender For construction of segregation shed with material recovery facility centre for plastic waste management at agatti (re tender-i) - surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, providing and laying cement concrete 1:4:8 ( 1 cement: 4 river sand: 8 granite chips ) foundation and plinth., providing and laying cement concrete block (machine moulded) masonry in in foundation and plinth in cm 1:6 with blocks of size 40cmx20cmx15cm, providing and laying half block masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 metal sand ) cement concrete block of size 40cmx10cmx15cm, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand), providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer g.i.pipe, steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing aluminium sheet roofing fixed with galvnized iron jor l hooks and 8mm dia c.i plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick., cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc.complete a) 40mm thick with 20 mm nominal size stone aggregate, providing ridges or hips in aluminium sheet roofing with g.i /j or l hooks bolts and nuts 8 mm dia g.i plain bitumen washers complete. 0.56mm thick., providing and fixing m.s welded mesh 50mmx50mm in position and applying a priming coat of approved steel primer with all necessary nails

State Government

CTN :41264616

11 Aug, 2025 NA

Rewa - Madhya Pradesh

Tender For purchasing fencing item for divisional forest office rewa - laying and jointing pvc pipe. heading, pre stressed reinforced cement concrete fancing pole size 100x100mm of 2mtr. length, galvanized steel barbed wire -line wire - galvanised steel wire of 2.5 mm diameterpoint wire - galvanised steel wire of 2.5 mm diameterbarbs - distance between two barbs 75mm, the barbs shall have four points and shall be formed by twisting two point wire each two turns, tightly around both the line wire making altogether four complete turns.standard - conforming to iso - 9001:2015 with up to date amendments., galvanize steel chain link fence fabric - size 100x100 mm, 4 mm dia mesh wire & width 1.5 m conforming to is 2721 2003 upto date amendments.

State Government

CTN :41219129

02 Aug, 2025 12.68 Lacs

Delhi - Delhi

Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts

Central Government And Public Sector

CTN :41026707

06 Aug, 2025 NA

Imphal - Manipur

Tender For corrigendum : supply of supply of sitc of 2nos 30 kva and 2nos 20 kva rtu dg sets in manipur d d - 30kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 30kva dg set with acceptance testing , supply of 20kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 20kva dg set with acceptance testing , earthing with gi earth plate 600 mm x 600 mm x 6 mm thick , providing and fixing 25 mm x 5 mm gi strip in 40 mm dia gi pipe , providing and fixing 25 mm x 5 mm gi strip on surface or in recess , providing and laying in position reinforced cement concrete plinth for dg set , supplying of 3.5x25sqmm of pvc insulated and pvc sheathed xlpe steel armoured aluminum conductor ug power cable of 1.1kv grade , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm direct in ground , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm in the existing pipe , laying and fixing of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq mm clamped with 1mm thick saddle on wall surface , supplying and making end termination with brass compression gland and aluminium lugs for size 3.5x25 sq mm

State Government

CTN :41182366

05 Aug, 2025 30.67 Lacs

Parganas - West Bengal

Tender For supplying and laying of reinforced cement concrete pipe np4 of 600mm (id) dia pipe along the southern bypass road (western flank) from merlin skygaze at holding no 111 to nearest pit of cross drainage of southern bypass under the jurisdiction

Central Government/Public Sector

CTN :41185962

13 Aug, 2025 98.60 Lacs

Shillong - Meghalaya

Tender For tender for supply of provision of individual intensity control for runway threshold and end lights at shillong airport : : - supply of 1 x 6 sq. mm 5 kv grade single core. (refer item no.1 of boq page no.1) , supply of 5 kv grade 6 sq. mm size plug and receptacle. (refer item no.2 of boq page no.1) , supply of 50 mm size hdpe pipe. (refer item no.3 of boq page no.1) , supply of medium class gi pipes 40 mm. (refer item no.4 of boq page no.1) , supply of following size of xlpe insulated pvc sheathed aluminum conductor armored power cable of 1.1 kv. (refer item no.5 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.6 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.7 of boq page no.1) , supplying and making cable route marker with cement concrete. (refer item no.8 of boq page no.2) , making field connections by crimping upto 6 sq.mm plug and receptacle. (refer item no.9 of boq page no.2) , laying of following size hdpe pipe of size upto 90 mm isi marked along with existing accessories. (refer item no.10 of boq page no.2) , laying of the following size hdpe pipe of size upto 90 mm isi marked. (refer item no.11 of boq page no.2) , laying of one number pvc insulated & pvc sheathed armoured aluminium cable. (refer item no.12 of boq page no.2) , laying of one number pvc insulated and pvc sheathed. (refer item no.13 of boq page no.2) , laying of following size dia. medium b class gi pipe. (refer item no.14 of boq page no.2) , laying and fixing of one number pvc insulated. (refer item no.15 of boq page no.3) , laying and fixing of one number pvc insulated and pvc sheathed. (refer item no.16 of boq page no.3) , providing and laying 6 swg gi wire in the trench. (refer item no.17 of boq page no.3) , earthing with gi earth pipe 4.5 m long and 40mm dia. (refer item no.18 of boq page no.3) , supply of ci transformer housing box. (refer item no.19 of boq page no.3) , installation of transformer housing box. (refer item no.20 of boq page no.3) , sitc of indoor type air cooled constant current regulator. (refer item no.21 of boq page no.4) , sitc of indoor type air cooled constant current regulator. (refer item no.22 of boq page no.4) , integration of threshold and end lights circuits with the existing alcms panel. (refer item no.23 of boq page no.4) , design manufacturing supply installation testing and commissioning of lt panel. (refer item no.24 of boq page no.5)

corporations/Associations/Others

CTN :41187362

07 Aug, 2025 50.00 Lacs

Somnath - Gujarat

Tender For annual rate contract for supplying of streetlight material for the fiscal year - supply 24w led street light makebajaj/crompton/havells/oreva/halonix/ c&s, supply 36w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 45w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 100w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 120w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 50w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 100w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 150w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 200w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 22w led tube light complite fitting makebajaj/crompton/havells/oreva/c&s/syska/ushahalonix, supply alluminumarmourd cable 4core 6.0sqmm, supply 9 inch exhaust fan make- bajaj/crompton/havells/ushahalonix, supply ceiling fan-48inch makebajaj/crompton/havells/usha/orpat/polycab, supplying dwc pipe- 50mm size, supplying fan regulator-5 step moduler type, supplying frls wire of 1.0 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 1.5 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 2.5 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 4.0 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying 4 core 2.5sqmm armoured copper cable makehavells,rr,polycab,finolex,kei, supplying 4 core 4.0sqmm armoured copper cable makehavells,rr,polycab,finolex,kei, supplying 4cx10 sqmmalluminumarmoured cable makehavells,rr,polycab,finolex,kei, supplying and erecting approved make octagonal pole made from hr sheet steel. the pole should be made as per is. and shall be coated with hot dip galvanizing as per is 2629/2633/4759, suitable suspend local wind speed with integral junction box consist of terminal plate of min 6mm hylam sheet, standard profile 35mmx7.5mm din-rail for mcb mounting, stud type terminal and arrangement for cable termination to be erected with suitable foundation (included) as per details given by manufacturer considering site requirement., (e) 7 mtr. long 70 mm top x 135 mm bottom dia, 3 mm thickness with 225mmx225mmx16mm base plate, 4-m20 bolts and 600mm long j-bolt.approx pole weight 67 kg, supplying psc pole 7 mtr height with 210kg weight, pvc /cotonteprol, supplying 3 star and above rated approved make window type air-conditioning machine comprising of hermetically sealed rotary compressor, condensing & evaporating unit, fan/blower motor, thermostat, relay, remote hand setsetc suitable for (b) 1.5 ton capacity, making trench in hard murrum / tar road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing 1:2:4 cement concrete foundation & 70 percentage pcc from bottom including excavation for the pole of size 60 x 60 x 150 cm. deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 9 & 10 mtr pole), supplying and erecting street light pole bracket comprising main b class ms pipe of 4.2 cm/require outside dia. complete with suitable b class m.s. sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and having suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded stiffener reducer and with lock nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. suitable for side entry fitting brackets of following nos of arms. [a] single arm bracket 1 mt, supply alluminium service wire- 2 core 2.5 sqmm, supply copper service wire- 2 core 2.5 sqmm, 11 kv hand gloge, 11 kv combin

Corporations/Associations/Others

CTN :41155740

28 Jul, 2025 NA

Alibagh - Maharashtra

Tender For supply of machineries for solid waste management project (sbm 2.0) - name of machineries, garden waste shredder machine, briquetting machine and automated mrf sorting machine, stone crusher, organic waste composting machine, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and in, brick work in c.m 1:5 mix including all labour 1charges etc complete brick work in c.m 1:5 mix including all labour 1charges etc complete, laying and jointing pvc pipe. heading, plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using, brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost, construction of chamber for 100mm sluices valve, construction of chamber for 100mm sluices valve - name of machineries, garden waste shredder machine, briquetting machine and automated mrf sorting machine, stone crusher, organic waste composting machine, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and in, brick work in c.m 1:5 mix including all labour 1charges etc complete brick work in c.m 1:5 mix including all labour 1charges etc complete, laying and jointing pvc pipe. heading, plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using, brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost, construction of chamber for 100mm sluices valve, construction of chamber for 100mm sluices valve

Upvc Pipeline Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors