Latest uv cabinet Tenders | Government uv cabinet Tenders

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45679526

09 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of ayurvedic lab item as per requested specification - centrifuge, rotary evaporator, autoclave, freeze dryer/lyophilizer, incubator, chromatography reflector platform atomizer, ostwald glass viscometer, pycnometer/specific gravity bottle, sonication equipment, heating mantle (250, 500, 1000 ml), uv cabinet/transilluminator, desiccator, magnifying lens with light, dissection wax tray, digital weighing scale (0.001 accuracy), digital weighing scale (0.001 accuracy, 10–100g range), homogenizer, rectangular water bath, o.t. spot light, bone cutter, disarticulated bone set, standard-sized projector, mortar and pestle

CTN :45610562

03 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of automated hplc system for separation of complex mixtures (q3) , atomic absorption spectrophotometer-1 , ft-ir with hydrolic press-1 , tablet dissolution test apparatus , microscope-1 , uv- spectrophotometer , flame photometer-1 , dis-intigration apparatus , digital refractometer-1 , moisture balance with printer , muffle furnesh-1 , digital balance , rotery vaccume evaporator-1 , refrigerated centrifuge , water purification system-1 , water bath , hot plate , oven-1 , sonicator-1 , eye washer- 1 , atomic absorption spectrophotometer , ft-ir with hydrolic press-2 , deep freezer , laboratory refrigerator-1 , microscope-2 , grinder mixture , flame photometer-2 , ph meter , br machine with digital display , glassware drier , muffle furnesh-2 , cerculating water bath , rotery vaccume evaporator-2 , gerber centrifuge machine , water purification system-2 , water bath with digital display , hot plate with digital display , oven-2 , sonicator-2 , digital refractometer-2 , eye washer-2 , uv vis spectrophotometer , ft-ir spectrophotomter with accessories , uhplc versongradient pda fluorescent , glc with fid detector with head space , potentiometric titrator with necessary electrodes , kf titrator , dissolution apparatus manual , dissolution apparatus with auto sampler , dt apparatus , polari meter digital single wavelength , refractometer digital , melting point apparatus digital , analytical balance 4 digit with printer , ph meter digital , hot air oven , vaccum oven , sonicator-3 , centrifuge , uv cabinet , magnetic stirrer , laboratory refrigerator-2 , colorimeter , thermostatic water bath , platinum crucible , muffle furnance digital , water purification system-3 * /bid number : gem/2026/b/7662112 + /dated: 18-06-2026 ' ' / bid document 1 / 58

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

State Government

CTN :45398397

16 Jun, 2026 1.09 Crore

Tumkur - Karnataka

Tender For short term re-tender for the supply and installation of scientific equipments and others sanctioned under pm-usha grants - ft-ir spectrophotometer with atr and ups for analysis of organic samples, digital balance (4 digit), analytical balance, refrigerated centrifuge, layophilizer, gel documentation system/gel analyzer system for dna and protein analysis, uv visiblespectrophotometer, biosafety cabinet, visible spectrophotometer, soil moisture meter (0-100%), ph meter (361), water distillation unit plant (ddu 1500-borosil), wkm micro channel plastic micropipette kit ktn198 (pack of 3), horizontal laminar air flow, auto clave, binocular microscope, centrifuge (remi), electrophoresis unit, vortex_, olympus biological microscope - binocular led (mx 2li), incubator_, ph meter_, laf (4x2x4), microwave oven_, dslr camera, freezer -16 to -25 oc 350 l capacity, water bath (wbp012-borosil), hot air oven type memmert, rotor spinner, spin win (spiunwin mc-01), soxhlet extractor, conductivity meter (308-systronics), vacuum filter, ice maker, muffle furnace_, digital weighing balance (10 mg to 300 g), heating mantle, magnetic stirrer with hot plate_, micropipette set, lab deep freeze, orbital shekar mc-01 (3050), rotary evaporator, slab gel electrophoresis system, submerged electrophoresis system, tlc chamber, power packed electrophoresis, ph meter microcontroller based, colorimeter_, remi5-mlh magnetic stirrer with hotplate, deep freezer (-20oc), mixer grinder for laboratory, gel-rocker (bench rocker), muffle furnace up to 1200 oc, binocular microscope magnus, sterio microscope olympus sz51, hot air oven htlp 45l, tlc plates plastic based silica gel, trans illuminator (hv-it-20), column chromatography chamber, digital multimeter, laser fiber source 30 w, centrifuge machine, uv cabinet with tube, horizontal gel electrophoresis et- h1 for laboratory, hot air convention oven, refrigerator (double door) for laboratory, muffle furnace 1400 oc (18.5l), camera with high resolution for capturing and video, remi laboratory centrifuge -led 6000 rpm (r 8c plus), benchmark accuris uv transilluminator ac/dc input 230v, semi automatic microphone, platform pad, olympus 10x50 s binocular, remi magnetic stirrer-5lts hotplate (5-ml), airconditioners

CTN :45182467

08 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of high performance liquid chromatography (hplc) system (q3) , atomic absorption spectrophotometer-1 , ft-ir with hydrolic press-1 , tablet dissolution test apparatus , microscope-1 , uv- spectrophotometer , flame photometer- 1 , dis-intigration apparatus , digital refractometer-1 , moisture balance with printer , muffle furnesh-1 , digital balance , rotery vaccume evaporator-1 , refrigerated centrifuge , water purification system-1 , water bath , hot plate , oven-1 , sonicator-1 , eye washer-1 , atomic absorption spectrophotometer , ft-ir with hydrolic press-2 , deep freezer , laboratory refrigerator-1 , microscope-2 , grinder mixture , flame photometer-2 , ph meter , br machine with digital display , glassware drier , muffle furnesh-2 , cerculating water bath , rotery vaccume evaporator-2 , gerber centrifuge machine , water purification system-2 , water bath with digital display , hot plate with digital display , oven-2 , sonicator-2 , digital refractometer-2 , eye washer-2 , uv vis spectrophotometer , ft-ir spectrophotomter with accessories , uhplc versongradient pda fluorescent , glc with fid detector with head space , potentiometric titrator with necessary electrodes , kf titrator , dissolution apparatus manual , dissolution apparatus with auto sampler , dt apparatus , polari meter digital single wavelength , refractometer digital , melting point apparatus digital , analytical balance 4 digit with printer , ph meter digital , hot air oven , vaccum oven , sonicator-3 , centrifuge , uv cabinet , magnetic stirrer , laboratory refrigerator-2 , colorimeter , thermostatic water bath , platinum crucible , muffle furnance digital , water purification system-3 ) /bid number : gem/2026/b/7527284 * /dated: 13-05-2026 & & / bid document 1 / 55

corporations/Associations/Others

CTN :45138221

08 Jun, 2026 NA

Koderma - Jharkhand

Tender For corrigendum : providing of custom bid for services - calibration of 3 nos instruments (ir thermometer, digital flue gas analyzer & ndct performance measurement system) along with replacement sensors

CTN :45045990

01 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For bid to ras supply of uv cabinet

CTN :44455226

06 Apr, 2026 NA

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of timer , tem controller , oven , decompression tool , gauge , data logger , thermometer , protractor , probe , hot bonder , thermo couple , controller , tds meter , weighing balance , machine , megger , digital force gauge , infrared thermometer , lcr meter , force gauge , lux meter , micrometer , trammel bar , feeler gauge , ground fault tester , inspection machine , residual field indicator , gauss meter , intensity meterdyeglo , uve lux meter , uv light meter , visible light meter , aerocheck , tam panel psm5 , hoffmanntam panel , surface plate cast iron , protractor mount , fuel quantity test adaptor kit , dmc tool kit , elt tester , reflectometer , mx6 hybrid multi gas detector , ulb tester , analyser , tester , lrra tester , altimeter , clampmeter , air data test set , milli ohm meter , calibrator , sound level meter , vacuum gauge , static charge meter , surface resistivity meter , portable eddy current machine , hydraulic tank , gauge assy push pull , exting fire test , dynamometer , fire extinguisher system , ext fire test , calibration standard , reference standard , calibration block , safety lock actuator cargo , device check vapor seal , test set engine bleed , cart pressure , ground test motor , tensio meter , our side micrometer , bevel protector , dynamometer safety , tons gauge , dial depth gauge , dial test indicator , mechanical force gauge , hygrometer

CTN :44391327

08 Apr, 2026 25.00 Lacs

Delhi - Delhi

Tender For corrigendum : supply of ulra violet (uv) cabinet for sterilization (q3)

Uv Cabinet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others