Web Analytics Made Easy - StatCounter

Vacuum Evaporator Tenders

Get complete information related to latest Vacuum Evaporator Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Vacuum Evaporator Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Vacuum Evaporator Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :40534114 Due date: 05 Jun, 202505 Jun, 2025 NA
Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 1 to 5 as per drg. no.ksc/bh/8607 fig.-2, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, seri

CTN :40541399 Due date: 10 Jun, 202510 Jun, 2025 NA
Tender For supply of spares - supply of evaporator assembly , condenser assembly , drain hose 5 feet , r134a service valve discharge , r 134a service valve suction , receiver drier assembly , orifice drier assembly , coupler , coupler boot , receiver drier clamp , orifice drier clamp , hose 15mm id 19ft , hose 11mm id 18ft , hose 8mm id 2ft , hose 8mm id 4ft , heater valve , control panel-manual , louver , louver , diffuser , hose 8mm id 5ft , heater hose15mm id (engine to heater val) , heater hose 15mm id (heater valve to eva) , heater hose 15mm id (evaporator to engin) , rocker switch , wiring harness manual , sensor with wire , relay assembly , automatic temparature controller , relay board , heater valve , air filter assembly , hvac coil assembly , blower motor assembly , condenser coil , condenser fancondenser fan , condenser assembly , evaporator assembly , heater valve guard , evaporator side guard , orifice drier clamp , orifice guard , hose 15mm id 14ft , hose 11mm id 9.5ft , hose 8mm id 9.5ft , hose 8mm id 7ft , heater hose 15mm id 16ft , heater hose 15mm id 13ft , wiring harness manual , r134a service valves , condenser assembly , evaporator assembly , hose clamp 3/8 , hose clamp 1/2 , hose clamp 5/8 , front louvers assy , heater hose clamp , heater hose double clamp , heater valve , orifice drier assy (aries) , blower assembly , louver assembly , receiver drier clamp , orifice drier clamp , evaporator side guard , orifice guard , thermostat (eabd109) , air filter , compressor oil , filter knob , heater coil , colling coil , selector switch , knob selector switch , knob thermostat , rocker switch , breaker main , sensor wire , o-ring 3/8 , o-ring 1/2 , o-ring 5/8 , 3 duct hose 10ft , 3 duct hose clamp , hose 8mm id 12ft , hose 8mm id 6ft , hose 8mm id 2ft , heater hose 15mm id 15ft , heater hose 15mm id 9ft , heater hose 15mm id 18ft , hose 15mm id 16ft (aries) , hose 11mm id 9.5ft (aries) , hose 8mm id 2ft (aries) , pressure switch , control panel manual , wiring harness manual

Central Government/Public Sector

CTN :40477707 Due date: 05 Jun, 202505 Jun, 2025 NA
Tender For tender for supply of spares required for komatsu hydraulic excavators - pulley hardening 6156 61 3640 komatsu , pulley hardening sd2080 21900x0 komatsu , compressor assy 20y 810 1260 komatsu , link assly 208 70 n2250 komatsu , arm bucket link 208 70 73140 komatsu , arm bucket link 208 70 73150 komatsu , cylinder assy pn 707 01 n1540 komatsu , evaporator pn nd446600 0992 komatsu , turbocharger assly 6156 81 8170 komatsu , starting motor asy 600 813 9323 komatsu , water pump pn 6154 61 1102 komatsu , bushing pn 208 70 61480 komatsu , bushing pn 209 70 52141 komatsu , tube pn 707 86 13080 komatsu , tube pn 208 63 73580 komatsu , cylinder assembly pn 70701n1530 komatsu , alternator assy pn 600 821 9690 komatsu , condenser assy pn 208 979 7520 komatsu

Central Government And Public Sector

CTN :40345653 Due date: 05 Jun, 202505 Jun, 2025 15.00 Lacs
Tender For operation & maintenance assistance for various process plant, equipment and machinery of chemical engineering division at barc, trombay, mumbai 85 a) fluidized bed reactor- 6 nos. b) mixer settler -30 nos. c) ss dissolver reactor-4 nos. d) precipitation set up 4 nos. e) ss high pressure autoclave 3 nos. f) hastelloy reactor 6 nos. g) ptfe lined & coated tanks-10 nos. h) glass reactor 10 nos. i) glass and ss columns/tanks 25 nos. j) plunger pumps-20 nos. k) valveless metering pumps- 10 nos. l) rotary vacuum evaporator- 3 nos m) centrifugal pump- 15 nos. n) vacuum pumps- 10 nos o) blowers- 10 nos p) washing tank- 5 nos q) feed tanks -10 nos r) muffle furnaces- 3 nos s) hot air oven- 3 nos t) scrubber tanks & pumps 10 nos u) chiller units-12 nos v) boiler unit- 5 nos w)electrolyser- 12 nos x) glass with condenser- 10 nos
 Loading, Please wait...

Connect us via What's Up