Web Analytics Made Easy - StatCounter

Van Scrap Tenders

Get complete information related to latest Van Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Van Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Van Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45019362 Due date: 08 May, 202608 May, 2026 NA
Tender For auction sale of depot miscellaneous scrap - 98413405 scrap various types of rubber, pvc, fiber and plastic items consisting of pvc dustbin, tricolour battery, pvc pipe, pvc ice box, pvc sheets, drums, chairs, plastic cane different size, poh kit, metar box, cable skin pvc, tube light frame, pvc cooler body with electirc fan, battery box, canopy, bucket, cane, water tank, casing caping, helmets, pallet, washers, various type of air hose pipe with or without attachment of ferrous both side, air brake cylinder poh kit, released pvc gates, pvc tubelight, fall ceilling, side bearer pu pad ring, pvc, plastic,lpg pipe,da gas pipe, plastic doors, and other rubber, plastic, fibre items used in wagons and various type of pvc, fibre, rubber items of diesel loco and signal & tele communication department etc. of shorts and sizes with or without minor non-ferrous, ferrous attachment. ( in two stack)

Central Government/Public Sector

CTN :45031651 Due date: 06 May, 202606 May, 2026 NA
Tender For auction sale of depot ferrous scrap - cond. & u/s bazaar scrap such as various types of filters, dust shield spring and including highly corroded nature of foot steps, berth frame, fs shutters, transfer trolley, trolley wheel, car body filter, showel w/wo handle, cot, vacuum cylinder, vacuum chamber, corroded/ dinged/ damaged wagon door, mortar pan, wire powrah, h s lamp, corroded drums of various capacity, zinc coated fs sheets, wagon floor sheet, g.i. sheet, guide spring, guide ring, foam ladder, small paint tins,saw blade, fire bucket, main switch stand, coach door, sliding door, battery boxes, battery box door, collapsible gate, thin spring of various shapes, sorts and sizes in corroded condition, highly corroded nature items (cut barrels, corroded paint drums & barrels), air filter,highly corroded nature items (paint drums), empty dpt can (bazaar), punches plate/ sheet/ screen, corroded shear cutups, ms angle,half cut barrels, traction motor filter (bazaar), channel, cut rails, roof light/tube light fitting, fl housing regulator box, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires, chains, boxes, hoop iron, lamps, wall protector, trough sheets, air filter, clips, panels, gi pipes with/without valves, ci covers, corroded/ damaged/ dinged condition coach/wagon cutup parts, sheets, equalizing stay, brake anchor, commode chutes, pins, rivets, bolts, nuts, small iron pieces, wire rope/safety rope with/without aluminum sling and all other ms/ci/fab items of highly corroded nature and all the above items are of sorts and sizes in full/cut/broken/damaged and with/without minor nfs attachments including loose bits as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: (1) cutting not permitted. (2) during delivery, if any major nfs items found, the same needs to be handed over to custodian. location: 1)14th pathway lhs adjacent to bin 1, 2)14th pathway lhs bin 1, 3)14th pathway rhs wall end.

CTN :44952908 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/nmp/14/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 10079767759 boxnel (nlb) 2) sc 10099860126 boxnm1 (nlb) 3) se 30079303863 bcnam1 (nlb) 4) sc 10099763168 boxnm1 (nlb) 5) special repair 25069660255 boxnr (nlb) steel body 6) se 10079765656 boxnm1 (nlb) 7) se 10079771299 boxnm1 (nlb) 8) se 25079777622 boxnr (wm) steel body 9) se 10079771480 boxnm1 (wm) 10) sc 10099762840 boxnm1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952909 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/nmp/13/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 25079882746 boxnr (nlb) steel body 2) wr 10089762577 boxnm1 (nlb) 3) special repair 10069749680 boxnm1 (nlb) 4) nr 75039288897 bobsnm1 (nlb) 5) se 75079216027 bobsnm1 (nlb) 6) nr 75039188142 bobsnm1 (nlb) 7) se 75079217901 bobsnm1 (nlb) 8) cr 10019660348 boxnm1 (wm) 9) sc 25099661857 boxnr (wm) steel body 10) sc 30099368064 bcnam1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock-a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952910 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/nmp/16/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079216171 bobsnm1 (nlb) 2) se 75079216508 bobsnm1 (nlb) 3) nr 75039160063 bobsnm1 (nlb) 4) se 10079765663 boxnm1 (nlb) 5) se 10079772524 boxnel (nlb) 6) se 10079758115 boxnm1 (nlb) 7) se 25079663093 boxnr (nlb) steel body 8) se 10079618419 boxnm1 (nlb) 9) cr 10019860489 boxnm1 (nlb) nb: (1) : i) wagons are to be sold without 18 nos. nlb trolleys against srl. no. 01 to 09. ii) wagons srl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952911 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/nmp/17/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079216058 bobsnm1 (nlb) 2) sc 75099260017 bobsnm1 (nlb) 3) nr 75039160384 bobsnm1 (nlb) 4) se 75079215549 bobsnm1 (nlb) 5) sc 10099563003 boxnm1 (nlb) 6) cr 25019660182 boxnr (nlb) steel body 7) se 10079665512 boxnm1 (nlb) 8) er 75029260131 bobsnm1 (nlb) 9) se 75079260402 bobsnm1 (nlb) 10) se 75079216409 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952912 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/nmp/18/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) sc 75099160362 bobsnm1 (nlb) 2) se 75079215969 bobsnm1 (nlb) 3) er 75029260018 bobsnm1 (nlb) 4) er 75029279515 bobsnm1 (nlb) 5) sc 25099660928 boxnr (nlb) steel body 6) cr 10019501733 boxnm1 (nlb) 7) er 30029063151 bcnm1 (nlb) 8) se 75079215297 bobsnm1 (nlb) 9) nr 75039260190 bobsnm1 (nlb) 10) er 30029061645 bcnm1 (wm) nb: (1) : i) wagons are to be sold without 18 nos. nlb trolleys against srl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolley against srl. no. 10. iii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock-a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952913 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/nmp/19/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) cr 75019208129 bobsnm1 (nlb) 2) se 75079116808 bobsnm1 (nlb) 3) se 10079660975 boxnm1 (nlb) 4) special repair 10069749505 boxnm1 (nlb) 5) special repair 25069660293 boxnr (nlb) steel body 6) sc 25099661345 boxnr (nlb) steel body 7) sc 10099620584 boxnm2 (nlb) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons special repairl no 01 to 07 to be sold without 28 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952914 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/nmp/20/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) special repair 75069295278 bobsnm1 (nlb) 2) er 75029279478 bobsnm1 (nlb) 3) se 75079260617 bobsnm1 (nlb) 4) se 10079663594 boxnm1 (nlb) 5) special repair 10069749079 boxnm1 (nlb) 6) se 10079768336 boxnm1 (wm) 7) sc 10099632648 boxnm1 (wm) nb: (1) : i) wagons are to be sold without 10 nos. nlb trolleys against special repairl. no. 01 to 05. ii) wagons are to be sold with 04 nos. wm trolleys against special repairl. no. 06 and 07. iii) wagons special repairl no 01 to 07 to be sold without 28 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952917 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of rolling stock - lot no.ws/ayma/23/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 75029279645 bobsnm1 (nlb) 2) nr 75039160827 bobsnm1 (nlb) 3) nr 75039289085 bobsnm1(nlb) 4) nr 75039160506 bobsnm1(nlb) 5) nr 75039288736 bobsnm1(nlb) 6) se 75079260150 bobsnm1(nlb) 7) nr 75039260282 bobsnm1(nlb) 8) se 75079260525 bobsnm1(nlb) 9) nr 75039289078 bobsnm1(nlb) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against srl. no. 01 to 09. ii) wagon serial no. 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.
 Loading, Please wait...

Connect us via What's Up