Latest vapour recovery system Tenders | Government vapour recovery system Tenders

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government/Public Sector

CTN :45021679

19 May, 2026 NA

Bangalore - Karnataka

Tender For supply of fuel transfer machine

Central Government/Public Sector

CTN :45038080

07 May, 2026 NA

Pune - Maharashtra

Tender For supply of calibration oil for bosch make le fip calibration test stand (diesel fuel injector testing machine) as per iso 4113. test certificate also required from the supplier. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :45008536

04 May, 2026 NA

Begusarai - Bihar

Tender For providing of rice , wheat flour , flattened rice (chura) , puffed rice (muri) , jaggery , chickpeas , lentils (dal) , roasted gram flour (sattu) , mustard oil , sugar , cumin seeds / cumin powder , turmeric powder , green chilies / red chili powder , coriander powder , black pepper powder , iodized salt , potatoes , onions , garlic , bread loaves , biscuits , milk powder (for children aged 6 months to 2 years) , matchboxes (medium size) , candles (7.5" long, 2.5" circumference) , mineral water , all types of cooking utensils (on rent) , cooking gas stove / burner (on rent) , plastic mugs , generator (on rent; includes fuel and operator) , other lighting equipment (all types of generator-powered equipment on rent) , waterproof tents / marquees (on rent) , cotton rugs (dari) (standard, all sizes) , floor mats (chattai) (standard, all sizes) , aluminum cooking pot , aluminum cooking pot , aluminum cooking pot , aluminum cooking pot , aluminum kneading platter (parat) , ter 640 , aluminum kneading platter (parat) , iron wok (karahi) , iron spatula , iron skimmer / strainer , iron skimmer / strainer , steel / iron ladle , steel / iron ladle , pressure cooker , flour sieve , rolling board & pin (chakla-belan) , steel tongs , iron bucket , knife , knife , steel container , steel jug , steel plate (thali) , steel tumbler / glass , steel bowl , large mixing bowl (kathota) , aluminum tray , chapati stove / griddle (tawa) , steel serving ladle (dabbu) , gas cylinder , cooking pot (ghanji) (various sizes) , lungi (ordinary quality, various grades) , cotton saree (ordinary quality, various grades) , cotton dhoti (ordinary quality, various grades) , cotton gamcha (ordinary quality, various grades) , soap (ordinary quality, various grades) [weight included] , oil (ordinary quality, various grades) , comb , muslin cloth bag , carry bag (bio-degradable) — 1 kg, 2.5 kg, and 5 kg sizes , mosquito net , plastic twine , kolkata-style twine , shirts and trousers for boys , frocks and trousers for girls , sanitary napkins , empty jute sacks , plastic container , plastic bucket , plastic jug , empty cement bags , head cap , floor sanitizer , floor sanitizer spray machine , tissue paper , hand wash , soap , food packet (parboiled rice 5 kg, masoor/arhar dal 1 kg, potatoes 2 kg, salt 500 g, small packet of turmeric) , dry ration , (sugar 500 g, chickpeas 1 kg, flattened rice/chura 2.5 kg, halogen tablets) , green vegetables , videographer (including camera operator)

Central Government/Public Sector

CTN :44964644

04 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released material of rcd consisting, {(1) oil storage tank cap - 200 kl, 01 no, (2) oil storage tank cap -70 kl, 03 nos, (3) oil storage tank cap-225 kl, 01 no, (4) 4 inch dia ms pipe 250 mtr, (5) 3 inch dia m.s pipe- 290 mtr, (6) 2 inch dia m.s pipe- 02 mtr, (7) 1 inch dia m.s pipe 15 mtr, (8) 4 inch valve- 08 nos, (9) 3 inch valve- 17 nos, (10) 2 inch valve- 10 nos, (11) 3 inch non return valve 01 no, (12) 4 inch steiner 01 no, (13) 3 inch steiner 02 nos, (14) fuel filling machine 01 no, (15) manual hutter 02 nos, (16) 10 hp diesel electric motor pump 02 nos, (17) 10 hp diesel generator pump 01 no in installed condition}, total qty- 230.015 mt, location- rcd (fuel cell) locomotive care centre ratlam. mode of delivery by actual weighment basis and on as is where is basis, custodian- sse-dl-rtm , fdp- 80 days. note- (1) tank and related items to be dismantle by the firm with proper safety and equipments. (3) cutting permitted, (3) the eligible bidder shall prepare and submit the detailed dismantling scheme including methodology, safety precautions, sequence of dismantling, equipment to be used and traffic/safety arrangements to sr. dme/lcc/rtm through sr. dmm/rtm.

corporations/Associations/Others

CTN :44958469

02 May, 2026 24.77 Lacs

Puruliya - West Bengal

Tender For supply of cassette baffle for ltsh, cassette baffle for eco, type-1, cassette baffle for eco, type-2, fins for ext sc wall w104 mm,t6mm sa36, fins sc front&rear wall w101mm,t6mm sa36, fins for sc rear wall w79 mm,t6 mm sa36, fins for sc side wall w57 mm,t6 mm sa36, fins for water wall w12.5mm, t6 mm sa36, uclamp ss304 10mm 65x100mm, u clamp ss304 10mm 53x100mm, u clamp ss304 bond paper (v3) conforming to is 1848 (part 1), copper alloy gate valve for waterworks purpose (v2) conforming to is 778, printing maplitho paper (v3) conforming to is 1848 (part 1), split air conditioner, ceiling mount type (cassette) (v3) isi marked to is 1391 (part 2), swing check type reflux valves for water works purposes (single door pattern) (v2) as per is 5312 (part1), sports management and talent identification software for sports eco system, temperature indicator for transformers - analog type, first - aid hose - reel for fire fighting as per is 884, cane for visually handicapped (folding type), alumina beam type brick for sinter machine furnace, split air conditioner, ceiling mount type (cassette) (v3) isi marked to is 1391 (part 2), mineral mixtures for supplementing cattle feeds conforming to is 1664, sports management and talent identification software for sports eco system, fuel containers (version 2), leather gauntlets and mittens (v2) conforming to is 2573, temperature indicator for transformers - analog type, cane for visually handicapped (folding type), aluminium conductors for overhead transmission purposes (v2) conforming to is 398, alumina beam type brick for sinter machine furnace, copper alloy gate valve for waterworks purpose (v2) conforming to is 778 10mm 62x100mm, quantity - 1060

CTN :44967905

04 May, 2026 NA

Ranchi - Jharkhand

Tender For supply and installation of fuel cell sensor based breath alcohol analyzer machine, dual mode(cms compatible & hand-held) with printer as per rdso spec. no. rdso/2015/el/spec/0119 (rev-2) dated: 15.03.2018 & point no.6 of annexure-a of the cris letter no. cao/fois/cms/sw/109(15)/2024-25, dated: 07.03.2025 (copy enclosed). the equipment shall meet rdso approved specification as well as cris also. the vendor must be a cris approved firm. make: model- alpha make- tayaltech or equivalent. warranty period: upto 30 months from the date of delivery. ]

State Government

CTN :44597072

22 Apr, 2026 19.14 Lacs

Port Blair - Andaman And Nicobar Islands

Tender For bid to ras supply of calliper inside , callipers outside , dividers , electrician screw driver , hands file for second cut flat , philips screw driver , scriber , spanners socket , steel rule , wire cutter and stripper , ammeter dc with external shunt , battery charger , blow lamp , chain pulley block , compression testing gauge , copper bit soldering iron , different type of engine bearingmodel , electric testing screw driver , engineers stethoscope , file flat , fuel injection pump ve pump or distributor fuel rotary pump dpc pumps or along with specialtools and accessories , grease gun , growler , hacksaw frame , hammer chipping , hammer copper , hammer mallet , hammer plastic , hand operated crimpingtool , injector , lifting jack screw , automotive oil pump for dismantling and assembling. , pliers flat nose , pliers side cutting , punch , radiator , radiator pressure cap , scriber with scribing black universal , spanner , starter motor , steel measuring tape in a case , surface gauge with dial testindicator plunger type , tandem master cylinder with booster , thermostat , vernier calliper , vice grip pliers , automotive water pump fordismantling and assembling , wire gauge , cut section models of shockabsorbers , cut section of cross ply and radial tyres , cut section working model of automatic transmission gear box , cut section working model of diaphragm clutch assembly , cut section working model of single plate clutch assembly , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition , arbor press hand operated , hydraulic jack , spring tension tester , working condition of diesel engine crdi four stroke engine assembly with fault simulation board , diesel engine six cylinder in running condition , transfer case with stand for dismantling and assembly , tube or tyre vulcanizing machine , wheel alignment machine , wheel balancing machine , steering assembly //bid details 2 / 53

State Government

CTN :44893152

25 Apr, 2026 4.25 Crore

Rewari - Haryana

Tender For de-silting of main sewerlines 200mm i/d to 900mm i/d by super sucker machine including driver, helper, operator and fuel complete in all respect with safety measure as per govt. instruction in rewari town.

Central Government/Public Sector

CTN :44882365

21 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released of condemned , overaged ferrous m and p items such as etp and incinerator plant of capacity 2 kld, make: b. i engg. vatva ahmedabad, year of commissioning 2008, qty of machine /plant is 01 number , located at diesel loco shed bandra with or without nf attachments and comprising of following accessories : 1] 02 nos ms tanks, 2] 01 no. diesel tank, 3] chimney, 4] chimney ladder 01 no, 5]girder 01 no loose,6] ladder 01 no. loose , 7] sand filtration tank 02 nos., 8] angles and channels , 9] ms pipes 06 nos., 10] chequer plates 10 nos., 11] chemical reaction vessel with motor of 1.5 hp, 12] compressor with 5 hp motor (single cylinder), 13] water pump connected motor of 05 hp with frame, 14] gear box with motor 1.5 hp with frame, 15] fuel and water pump with motor 05 hp with frame , 16] f and fan with fitted electrical motor 10 hp. having all parts off sorts , types, makes, broken/unbroken, burnt / un-burnt, damaged /undamaged , with or without rust, dust, oil paint , adhesive , wet and grease. plant custodian : sse/dsl/ba , mode of delivery by number, to be sale on as is where is basis, loading by purchaser. appx. disposable weight of plant is 11.6 mt note : 1] purchasers are requested to see/inspect m &p machinery/plant/ site before bidding. no claim will be entertained from purchaser's end after sale. 2] cutting is permitted if felt necessary.3] delivery will be given after full and final payment only 4] fdp 50 days 5] all delivery dates will be fixed through ireps. purchasers are advised to submit online request through ireps system at least 07 days before for fixation of delivery dates after preparation of delivery order.

Vapour Recovery System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors