Get complete information related to latest Vehicle Salvage Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Vehicle Salvage Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Vehicle Salvage Tenders.
Tender For auction sale of others - released & un serviceable scrap iron and steel scrap cut off parts casnub trolley as per attached image with two side frames and one bolster consists of per trolley.
Tender For auction sale of depot ferrous scrap - scrap cond. released various type m s material such as- octagonal boom, filter unit, battery box, goods warning board, no plate, signal ladder, point machine slide, tws rodding, point machine cover, deflectors, fire extinguisher, ms box, chair sheet, vehicle parts, tools spanner, tin sheet, acdb dcdb f/e cylinder, sliding rod, gate gear box, ms plates, structural steel of cop of pf no 1 ngp stn, point rodding, point group base plate bolt and nut, washer, deflector, pedestal, signal post, anticreep wire, tmt bars, channels distribution pannel, shunt post, route arm, relay rack, date logger, point gear, detection trolley, boom stopper, spanner, capacitor pannel, bus bar, tank, drum rod, misl, gate boom, rollers, cylinders, valves, fasteners, shafts, jack, wear plates, support strips, piston rods, beams, shock absorber, support pipes, tamping unit, smps power plant body, pipe, bone patti, mesh, cutting chain, conveyor chain, runway strips, wire ropes, bench vice, various type pway material etc and various type ms material as per online ds-8 notes with minor/major n.f. attached if any.
Tender For auction sale of blanket etc.,bty o/s etc.,tentage etc.,eng assy bmp (regd no 2001mpa etc.,eng assy t-72 (regd no ohl-2789 etc.,eng assy etc.,brass scrap etc.,helmet etc.,stainless steel etc.,steel scrap (ramp loading etc.,alluminium scrap etc.,mt scrap etc.,gen set 30 kva 4 wheeled trolley mtd s no 143 etc.,tarpauline old etc.,mt scrap (all types of b veh items etc.,fire ect o/s etc.,gen set 15 kva etc.,steel scrap (cocentina coil etc.,fire ext o/s without cap etc.,charger with brass nozzle (steel scrap) etc.,cover water proof etc.,jack o/s etc.,fire ext o/s etc.,fire ext 50 kgs etc.,tarpauline o/s etc.,tarpauline old etc.,blanket o/s etc.
Tender For auction sale of rolling stock - lot no.ws/s-yd/10/04/26-27/bg/cond./8w/emu motor coach and trailer coach description- iron and steel scrap cutup parts of bg cond./8w/emu motor coaches and trailer coach with or without n.f attachment, without contents if any. 1) se 10633 emu-mc 2) se 10632 emu-mc 3) se 10635 emu-mc 4) se 10636/108636 emu-mc 5) se 10954/108954 emu- tc 6) se 10950/108950 emu-tc nb: [1] (a) 04 emu motor coaches are to be sold without : i) buffers. ii) screw coupling. iii) bearing bolt. iv) draw and buff gear. v) draw hook with collar. vi) semi permanent coupler end -a. vii)semi permanent coupler end -b. viii) draw and buffer gear. ix) centre pivit pin top bush. x) centre pivot pin bottom bush. xi) wearing piece. xii) compensating ring. xiii) wheel sets 16 nos. xiv) oil pump motor. xv) radiator motor. xvi) rectifier cooling motor. xvii) transformer. xviii) choke tank (sl, tl & dl). xix) traction motor complete with pinion. xx) suspension brass bearing. xxi) auxilary compressor. xxii) battery charger. (b) 08 nos.bogie frames(trolley) are to be sold with fittings without primary suspension against srl no.01 to 04 . nb:[2]: emu trailer coaches are to be sold without 08 nos wheel sets along with roller bearing against srl no 05 and 06 and 04 nos bogie frame with complete fittings against srl 05 and 06 and other excluded fitting list as per latest excluded fittings /coach 1271 dated 13.09.2018. nb: [3] special condition for rolling stock- a) all excluded materials including wheel sets and bogie's fittings are to be handed over by the purchaser at the nominated location for which they have to arrange labour /tools/ equipment for loading of the excluded items from cutting site and then transport to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28 trolley, coil spring, screw coupling, buffer sets etc. (ii) sse-19 wheel sets (iii) sse-30 ep unit (iv) sse-53 & 56 other emu items to be hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser has cleared all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:[4] 24 nos. wheel sets with complete fittings and with excluded fitting (released item) and 04 nos.bogie frame with complete fittings are to be handed over by the purchaser to concerned location as advised by concerned sse. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys. [custodian/stock holder - sse-emu-56 for motor coaches and sse-carraige-kgpw for tc coaches]
Tender For auction sale of rolling stock - lot no.divn/nmp/18/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) sc 75099160362 bobsnm1 (nlb) 2) se 75079215969 bobsnm1 (nlb) 3) er 75029260018 bobsnm1 (nlb) 4) er 75029279515 bobsnm1 (nlb) 5) sc 25099660928 boxnr (nlb) steel body 6) cr 10019501733 boxnm1 (nlb) 7) er 30029063151 bcnm1 (nlb) 8) se 75079215297 bobsnm1 (nlb) 9) nr 75039260190 bobsnm1 (nlb) 10) er 30029061645 bcnm1 (wm) nb: (1) : i) wagons are to be sold without 18 nos. nlb trolleys against srl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolley against srl. no. 10. iii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock-a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For auction sale of rolling stock - lot no.divn/mn/21/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) sc 057422/c gs 2) se 058413 gs 3) se 058414 gs 4) sc 037231/c wgscn 5) se 058254 wgscn 6) se 058227 wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos. serviceable bogies against srl no: 01-01 (end-1), srl no.02-01 (end-2), srl no.04-01 ( end-1) and srl no. 06-02 (both bogies are serviceable) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-01, srl no.03-02, srl no 04-01 and srl no 05-02nos. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.
Tender For auction sale of rolling stock - lot no.divn/mn/22/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058802 wgcb 2) cr 054534 wgscn 3)wr 052380 wgscn 4) er 022337 wgscn 5) ec 024283 gs 6) nr 05272 wgscn 7) se 048702 gslrd nb: [1]. (a) all coaches are to be sold without 28 nos. wheel sets complete alongwith roller bearing against srl no 01 to 07 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against srl no: 04-02 (both bogies are serviceable) (c) the coaches are to be sold with 12 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 02-02, srl no.03-02, srl no 05-02, srl no 06-02nos and srl no 07-02. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 02 nos of bogies with complete fittings & 28 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.
Tender For auction sale of depot ferrous scrap - ms fabricating scrap : actual lot no. 03122604 1038. pl no. 98050047 (15) (hsn code 72044900--gst 18%-on fcm basis) scrap of cond. & unserviceable ms fabricating scrap of location boxes, different sizes. cut pcs of sheets eolb hinges, molb boom pcs, tljbs, pedestal stands, power junction boxes, rotary ladder trolley, iron stand, tubs, pallets, assembled boxes earth bonds signal ladders rods, steel racks, revolving chair, operator seats, junction boxes, cut pcs angles channels cls panel, ms clamps, s type chair cut pcs office s type chairs, revolving chairs, conference table, lecturer table, office table, duel desks, monkey climber devices, tool cabinets, wall iron frames single and double ladders, circuit breaker boxes, guard sheets, lockers, pipe pcs., tljbs, mddb boxes, slab rods, side body frames, shutters with flat tube light frames j hooks different sizes of sheets and pipes doors shutters seat frames chairs cupboards ms fencings, tool boxes, operator seats, wheel discs stands, panel boards mvmt ducts signal ladders guard seats cots and other miscellaneous items of wagon, s&t, loco, emu, ttm and electrical full or broken with or without attachments. .location road no.4(gas cutting should be minimum depends on material size and weight, maximum 6 cuts permitted only) (image attached). (note: 1. if any ss/ corten steel & non-ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery