Latest ventilation repair Tenders | Government ventilation repair Tenders

State Government

CTN :36273489

11 Jun, 2024 2.37 Lacs

Jammu - Jammu And Kashmir

Tender For complete servicing of the air handling units of the central air conditioning system 225 tr x 3 units installed at govt. super specialty hospital, jammu.

corporations/Associations/Others

CTN :36268949

06 Jun, 2024 5.66 Lacs

Murshidabad - West Bengal

Tender For supply and delivery of pre, fine, hepa filters for air handling unit (ahu) of the hvac system installed at domkal ssh, murshidabad

CTN :36270119

28 Jun, 2024 NA

Nagpur - Maharashtra

Tender For nit of procurement for supply of non-consumable items for ivf lab for obstetrics and gynaecology department - syms iii sealer for cbs high security straws and tubes. the syms iii sealer is a benchtop thermal sealer unit that is e used under a laminar flow hood to weld cbs high security straws, high security tubes, and hsv high security vitrification straws. it uses an automatic detection system (it uses pre- set specific combinations of seal temperature, time and jaw position for each cbs device). the syms iii sealer is designed to heat seal cbs high security 0.3 ml, 0.5 ml and cbs high security vitrification straws, and the cbs high security tube, for optimal cryopreservation of biological samples. color touch screen should be compatible with the use of laboratory gloves should display machine cycle display: pre-heating, ready status and sealing in progress should have two sealing modes: automatic detection or operator-controlled via the touch screen should display fault signal with messages and alarms should be able to display and tracking of maintenance modes should be easy to clean and service. dimensions (l x w x h): 335 x 250 x 105 mm with 5 years warranty., hsv straw cutter opening device for hsv vitrification straws hold the straw partly immersed in liquid nitrogen and gently remove the top of the outer straw using the straw cutter, with no risk of damaging the inner straw. with the top of the outer straw cut, the inner straw can be removed and placed in the warming solution immediately. 9.5 in h x 4.5 in w x 2.5 in d, portable label printer portable benchtop printer. the entire label should be visible on the display. the printer should be easily used as a stand-alone printer. use for barcode labeling 9.5 in h x 4.5 in w x 2.5 in d display type: monocolor lcd screen keyboard type: abc, cyrillic memory: 16 mb (2 mb available for storage, stores 12 labels) mode of operation: stand- alone mode device connectivity: stand- alone number of printers in kit: 1 number of symbols :104 auto shut off: 10 minutes recharge time: 2.5 hours barcode capability: barcode capable color printing capability: single color font sizes: 6-40 pt maximum print speed: 0.4/s print resolution: 203 dpi print technology: thermal transfer catridge printer series: m21 series (m21-) label material types: heat- shrink polyolefin, nylon cloth, paper, polyester, polypropylene, self- laminating polyester, self- laminating vinyl, vinyl should include: 1) printer 2) nylon cloth patch panel 3) wire and cable labels 4) quick start guide, liquid nitrogen transportation trolly this trolley should be made of mild steel, should have a capacity of more than 30 liters, and can carry up to 150 kilograms. its used to handle cryogenic containers and has a color coated finish., denudation and handling pipettes micropipettes designed for manipulation and transfer of oocytes and embryos during ivf procedures. non-breakable plastic tips that will not scratch the dishes should be compatible with all pipettors. should have medical grade plastic tip fitted with a flexible bulb for a reliable seal and simpler set-up. should have an autoclavable squeeze handle which is designed to offer ease of handling and a comfortable working position. single-use denudation and handling system has been developed for exacting laboratory sterility standards minimising any risk of cross contamination. are designed for manipulation and transfer of oocytes and embryos during ivf procedures. features. precise - adjustable aspiration volumes., partical count and voc meter this product gives information about the air quality present in the ivf lab. usage: measuring and control voc level in the room theory: measure and control iaq level with relay output output: relay out to control a ventilator or air-purifier brand: voc monitor and controller voltage-supply: 230v ac operating temperature: - 20 c~60 c (-4 f~140 f) mounting type: wall-mounting (optional) resolution (bits): 0.1ppm measuring range: 0~30p

corporations/Associations/Others

CTN :36098372

05 Jun, 2024 NA

Bankura - West Bengal

Tender For corrigendum : supply of spares for ash handling plant to used during overhauling of unit 7 mtps - gate frame seal for sluice gate , seal clamp for sluice gate , r.h. roller track of sluice gate , l.h. roller track of sluice gate , emergency jetting nozzle assembly for sluice gate enclosure , stainless steel ss 304 bolts nuts and double washers size 20 mm by100 mm full thread , hex. head. bolt with nutmaterial -ss 316 sizem16 by 80 full threaded , clinker grinder gland housing , packing gland follower for single roll clinker grinder , half inches special nipple for clinker grinder gland housing , bottom ash hopper feed sump body , m 12 by 95 lg hex head adjusting bolt full thread of air intake valve , nozzle for flushing apparatus drg. no. ia230-sd-2-039 , impingement plate part no.3 , nozzle set for air washer i a230-sd-2-020 , valve disc for fluidizing type fly ash inlet valve drg. no.- i-a230sd 2-017 , orifice for fluidisingline od-40mm id 4mm thickness-2mm material-ms , pivot ball assly for 12 inch by 6 inch diffuser feeder , shaft sleeve for rotar of silo rotary feeder id 50.4 m od-55 m length-60 m materialss-410 , worm and worm gear of gear box gear reducer iequal1 is to 80 rs60 of telescopic chute transmission drive system , coupling set rrs 150by 140 mm part no na material is 210 fg 200 , couplings makelovejoy jaw flex couplings size- l-100 , 25 nb socket with plug, material - ms , 25 nb gm non return valve srewed end class-150 , metallic ss expansion joint double layer for economiser flushing apparatus

Central Government/Public Sector

CTN :36252152

03 Jun, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For fad of iac and air audit of stage ii ash handling system at ntpc barh.

CTN :36261815

18 Jun, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 24v61c902 air handling unit- n6110-tv00051 , n6110-tv00052 , obs , b and d , documentation , training , fitment of ahu,proving satisfactory system operation and carry out air flow test as per rfp , type testing , any additional

CTN :36259866

04 Jun, 2024 NA

Puducherry - Tamil Nadu

Tender For operation and maintenance of various electrical & mechanical installations in bio safety level 2 & bio safety level 3 (rvrdl) at jipmer, puducherry for a period of 24 months sh: replacement of finned strip heater for the existing air handling units of hvac system

CTN :36212139

12 Jun, 2024 NA

Guwahati - Assam

Tender For procurement of cng booster compressor (2 years arc) - 400 scmh electric motor driven cng booster compressors, design, engineering, manufacturing, supply (including packaging and forwarding, insurance, handling, loading and unloading at port and delivery & unloading at clients store / site of skid mounted 22 kw electric motor driven hydraulic cng compressor package of average 400 sm3 / hr capacity at suction pressure of 30 kg/cm2 and discharge pressure 255 kg/cm2 (variable suction pressure range 30 to 200 kg/cm2) the package shall be inclusive of: a) string test of complete compressor package with air/nitrogen along with electric motor and accessories at packagers factory. b) special tools & tackles (list and price of each tools and tackles to be furnished by the bidder separately in price bid) c) design, engineering, manufacturing, supply (including packaging and forwarding, insurance, handling and unloading at clients store /site of air compressor of capacity approx 1.5 kw, discharge pressure approx 7 kg/cm2g , min 100 water litre air receiver and air dryer along with all accessories and auxiliaries.location-wise (tentative) quantities:cachar, hailakandi & karimganj ga- 5 nos.kamrup & kamrup metropolitan ga- 11 nos.stores/sites: silchar and guwahati, unit inland transportation upto delivery location and other costs incidental to delivery of goods, installation, commissioning, testing (item no 2.0 of mr), installation, commissioning & field performance test of compressor package including air compressor system at site(item no 2.1 of mr), total amount for supply,freight,installation,testing & commissioning (inclusive of taxes) based on quoted price, services for operations (item no 3.0 of mr), operation charges for 1st year i.e. during warranty period for 2 nos shifts(each shift of 8hrs) for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.50% of rate of item no. 1.1 quoted by the bidder., operation charges for 2nd year for 2nos shift (each shift of 8hrs) for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.55% of rate of item no. 1.1 quoted by the bidder., operation charges for 3rd year for 2nos shift (each shift of 8hrs) for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.61% of rate of item no. 1.1 quoted by the bidder., operation charges for 4thyear for 2nos shift (each shift of 8hrs)for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.67% of rate of item no. 1.1 quoted by the bidder., operation charges for 1st year i.e. during warranty period for 2 nos shifts(each shift of 8hrs) for kamrup & kamrup metropolitan ga (11 machines x 12 months x 2 shifts = 264 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.50% of rate of item no. 1.1 quoted by the bidder., operation charges for 2nd year for 2 nos shift (each shift of 8hrs)for kamrup & kamrup metropolitan ga (11 machines x 12 months x 2 shifts = 264 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.55% of rate of item no. 1.1 quoted by the bidder., operation charges for 3rd year for 2nos shift (each shift of 8hrs) for kamrup & kamrup metropolitan ga (11 machines x 12 months x 2 shifts = 264 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.61% of rate of item no. 1.1 quoted by the bidder., operation charges for 4thyear for 2nos shift (each shift of 8hrs) for kam

CTN :36207755

18 May, 2024 80.00 Lacs

Multi City - Telangana

Tender For hiring of bulk air handling system with water cooled chilled plant at alp mine on nomination basis

CTN :36195582

05 Jun, 2024 1.00 Crore

Nagpur - Maharashtra

Tender For supply of setting up of kidney transplant unit at aiims nagpur - air handling unit , supply of air handling unit eight hp , supply of refnet of required size , sitc of ahu connection kit. , installation of air handling units with ahu kit , installation of eight hp vrv condensing units , refnet joint , sitc of refrigerant piping for suction and liquid line , necessary refrigerant gas and oil charge , fabricated stand of ms base frame , drain piping for ahu condensation , sitc of aluminium ducting twenty two gauge , sitc of fire resistant flexible canvas sleeve flexible connections , sitc of manual fire damper with fusible link , sitc volume control damper , sitc of return air aluminium grill , sitc of laminar air flow , sitc of pressure monitoring system , sitc of pressure relief damper , sitc of uvgi lamp , sitc of medical grage copper pipe line , sitc of medical gas outlet , supply and installation of al risers , supply and application of nitril rubber insulation for internal duct , supply and application of exposed duct thermal insulation , supply and fixing of duct acoustic insulation . , removing of existing fire sprinkler smoke detector etc , supply and fixing of abc six kg extinguisher , supply and fixing of co2 four ponit five kg extinguisher , supply and fixing emergency evaccuation plan , supply and laying fire frls armoured cable , sitc of electrical panel , sitc of ahu control unit , sitc of vfd for ahu motor , sitc of heater bank , supply and laying of electrical power cabling copper armourred , supply and laying of electrical wire and conduit , supply and laying of ms conduit , supply and laying of pvc conduit , supply and laying of earthing strip with accessories , supply and laying of eight swg earthing wire , supply laying and termination of xlpe aluminium armored cable , supplying and laying of gi perforated cable trays , supply and laying of raceway , supply and fixing of switch socket as per the specifiaction , providing and laying cat six pair cable with all necessary accessories , supply and fixing of four way tpn horizontal db box with all accessories , supply and fixing ofisolator , supply and fixing of rccb , supply and fixing of mcb , supply and fixing of isolator , providing and fixing of scaffolding , sitc of bed head panel , sitc of ups as per specification , sitc of clean room luminaries , wall panel system , ceiling panel system , providing and fixing ante static vinyl flooring , providing corner coving , dismantling aluminium or gypsum partitions doors windows etc , providing ms cabinets including handles and accessories , providing and fixing tower bolt , providing sliding door , providing and fixing aluminium work polyester powder coated aluminium , providing and fixing aluminium work with float glass panes , providing and fixing double action hydraulic floor spring , providing ans fixing scrub station two bay , providing and fixing brass mortice latch and lock with levers without pair of handles , providing and fixing dgu glass in window , colour wash and applying white cement based putty fnishing with epoxy paint , providing and laying autoclaved aerated cement blocks , providing cement plaster , h type stainless steel grade stain finished pull handle of approved fixing accessories , demolishing brick work or concrete manually , extra for providing frosted glass panes instead of ordinary float glass panes in doors windows

Ventilation Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector